From: Andrew Morton <akpm@linux-foundation.org>
To: Zsolt Barat <zsolt@softmonsters.com>
Cc: lkml <linux-kernel@vger.kernel.org>, linux-ide@vger.kernel.org
Subject: Re: ATA bus error with external hd on esata
Date: Mon, 17 Dec 2007 02:53:21 -0800 [thread overview]
Message-ID: <20071217025321.2f7507db.akpm@linux-foundation.org> (raw)
In-Reply-To: <476434C7.6040307@softmonsters.com>
On Sat, 15 Dec 2007 21:10:47 +0100 Zsolt Barat <zsolt@softmonsters.com> wrote:
> Zsolt Barat schrieb:
> > hi list,
Let's cc the IDE development list.
> > i just bought a "MyBook" called external HD with a fixed enclosure, from
> > WD. Connected to the SATA port i constantly get "ATA bus error" messages
> > in the kernel log. Is this a known issue?
> >
> > /var/log/messages:
> > Dec 15 18:37:53 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> > action 0x2
> > Dec 15 18:37:53 proto1 ata2.00: irq_stat 0x40000001
> > Dec 15 18:37:53 proto1 ata2.00: cmd 35/00:e0:a7:d2:01/00:01:33:00:00/e0
> > tag 0 cdb 0x0 data 245760 out
> > Dec 15 18:37:53 proto1 res 51/84:00:86:d4:01/00:00:33:00:00/e0 Emask
> > 0x10 (ATA bus error)
> > Dec 15 18:37:54 proto1 ata2: soft resetting port
> > Dec 15 18:37:54 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
> > 310)
> > Dec 15 18:37:54 proto1 ata2.00: configured for UDMA/33
> > Dec 15 18:37:54 proto1 ata2: EH complete
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware
> > sectors (500108 MB)
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write Protect is off
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read
> > cache: enabled, doesn't support DPO or FUA
> > Dec 15 18:38:15 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0
> > action 0x2
> > Dec 15 18:38:15 proto1 ata2.00: irq_stat 0x40000001
> > Dec 15 18:38:15 proto1 ata2.00: cmd 35/00:80:bf:09:14/00:01:33:00:00/e0
> > tag 0 cdb 0x0 data 196608 out
> > Dec 15 18:38:15 proto1 res 51/84:00:3e:0b:14/00:00:33:00:00/e0 Emask
> > 0x10 (ATA bus error)
> > Dec 15 18:38:15 proto1 ata2: soft resetting port
> > Dec 15 18:38:15 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl
> > 310)
> > Dec 15 18:38:15 proto1 ata2.00: configured for UDMA/33
> > Dec 15 18:38:15 proto1 ata2: EH complete
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware
> > sectors (500108 MB)
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write Protect is off
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read
> > cache: enabled, doesn't support DPO or FUA
> >
> > lspci:
> > 00:00.0 Host bridge: ATI Technologies Inc Unknown device 7910
> > 00:01.0 PCI bridge: ATI Technologies Inc Unknown device 7912
> > 00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7917
> > 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
> > 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
> > 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
> > 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
> > 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
> > 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
> > 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> > 00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 13)
> > 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
> > 00:14.2 Audio device: ATI Technologies Inc SB600 Azalia
> > 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> > 00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
> > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > HyperTransport Technology Configuration
> > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > Address Map
> > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > DRAM Controller
> > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> > Miscellaneous Control
> > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon X1200 Series
> > 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio
> > Controller
> > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
> > 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> > Controller (rev c0)
> >
> > thanks and best regards
> >
> > zsolt
> >
> sorry, kernel version is: 2.6.23-gentoo-r1
>
next prev parent reply other threads:[~2007-12-17 10:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-15 19:40 ATA bus error with external hd on esata Zsolt Barat
2007-12-15 20:10 ` Zsolt Barat
2007-12-17 10:53 ` Andrew Morton [this message]
2007-12-17 17:09 ` Greg Freemyer
2007-12-17 17:26 ` Jean-Louis Dupond
2007-12-17 17:26 ` Jean-Louis Dupond
2007-12-18 13:12 ` Zsolt Barat
[not found] ` <4766B100.3010203@dupondje.be>
2007-12-18 13:14 ` Zsolt Barat
2007-12-18 13:14 ` Zsolt Barat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071217025321.2f7507db.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=zsolt@softmonsters.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.