From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: Michael Wu <flamingice@sourmilk.net>, linux-wireless@vger.kernel.org
Subject: [PATCH 7/9] mac80211: implement cfg80211s station handling
Date: Wed, 19 Dec 2007 02:03:35 +0100 [thread overview]
Message-ID: <20071219010342.459856000@sipsolutions.net> (raw)
In-Reply-To: 20071219010328.762470000@sipsolutions.net
This implements station handling from userspace via cfg80211
in mac80211.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
net/mac80211/cfg.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 192 insertions(+)
--- everything.orig/net/mac80211/cfg.c 2007-12-19 00:50:19.363027235 +0100
+++ everything/net/mac80211/cfg.c 2007-12-19 00:50:23.043022894 +0100
@@ -14,6 +14,7 @@
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "cfg.h"
+#include "ieee80211_rate.h"
static enum ieee80211_if_types
nl80211_type_to_mac80211_type(enum nl80211_iftype type)
@@ -422,6 +423,194 @@ static int ieee80211_del_beacon(struct w
return ieee80211_if_config_beacon(dev);
}
+/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
+struct iapp_layer2_update {
+ u8 da[ETH_ALEN]; /* broadcast */
+ u8 sa[ETH_ALEN]; /* STA addr */
+ __be16 len; /* 6 */
+ u8 dsap; /* 0 */
+ u8 ssap; /* 0 */
+ u8 control;
+ u8 xid_info[3];
+} __attribute__ ((packed));
+
+static void ieee80211_send_layer2_update(struct sta_info *sta)
+{
+ struct iapp_layer2_update *msg;
+ struct sk_buff *skb;
+
+ /* Send Level 2 Update Frame to update forwarding tables in layer 2
+ * bridge devices */
+
+ skb = dev_alloc_skb(sizeof(*msg));
+ if (!skb)
+ return;
+ msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg));
+
+ /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID)
+ * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */
+
+ memset(msg->da, 0xff, ETH_ALEN);
+ memcpy(msg->sa, sta->addr, ETH_ALEN);
+ msg->len = htons(6);
+ msg->dsap = 0;
+ msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */
+ msg->control = 0xaf; /* XID response lsb.1111F101.
+ * F=0 (no poll command; unsolicited frame) */
+ msg->xid_info[0] = 0x81; /* XID format identifier */
+ msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */
+ msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */
+
+ skb->dev = sta->dev;
+ skb->protocol = eth_type_trans(skb, sta->dev);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ netif_rx(skb);
+}
+
+static void sta_apply_parameters(struct ieee80211_local *local,
+ struct sta_info *sta,
+ struct station_parameters *params)
+{
+ u32 rates;
+ int i, j;
+ struct ieee80211_hw_mode *mode;
+
+ if (params->station_flags & STATION_FLAG_CHANGED) {
+ sta->flags &= ~WLAN_STA_AUTHORIZED;
+ if (params->station_flags & STATION_FLAG_AUTHORIZED)
+ sta->flags |= WLAN_STA_AUTHORIZED;
+
+ sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
+ if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE)
+ sta->flags |= WLAN_STA_SHORT_PREAMBLE;
+
+ sta->flags &= ~WLAN_STA_WME;
+ if (params->station_flags & STATION_FLAG_WME)
+ sta->flags |= WLAN_STA_WME;
+ }
+
+ if (params->aid) {
+ sta->aid = params->aid;
+ if (sta->aid > IEEE80211_MAX_AID)
+ sta->aid = 0; /* XXX: should this be an error? */
+ }
+
+ if (params->listen_interval >= 0)
+ sta->listen_interval = params->listen_interval;
+
+ if (params->supported_rates) {
+ rates = 0;
+ mode = local->oper_hw_mode;
+ for (i = 0; i < params->supported_rates_len; i++) {
+ int rate = (params->supported_rates[i] & 0x7f) * 5;
+ for (j = 0; j < mode->num_rates; j++) {
+ if (mode->rates[j].rate == rate)
+ rates |= BIT(j);
+ }
+ }
+ sta->supp_rates = rates;
+ }
+}
+
+static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac, struct station_parameters *params)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *sdata;
+
+ /* Prevent a race with changing the rate control algorithm */
+ if (!netif_running(dev))
+ return -ENETDOWN;
+
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (sta) {
+ sta_info_put(sta);
+ return -EEXIST;
+ }
+
+ if (params->vlan) {
+ sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ sdata->vif.type != IEEE80211_IF_TYPE_AP)
+ return -EINVAL;
+ } else
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ sta = sta_info_add(local, dev, mac, GFP_KERNEL);
+ if (!sta)
+ return -ENOMEM;
+
+ sta->dev = sdata->dev;
+ if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN ||
+ sdata->vif.type == IEEE80211_IF_TYPE_AP)
+ ieee80211_send_layer2_update(sta);
+
+ sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
+
+ sta_apply_parameters(local, sta, params);
+
+ rate_control_rate_init(sta, local);
+
+ sta_info_put(sta);
+
+ return 0;
+}
+
+static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+
+ if (mac) {
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (!sta)
+ return -ENOENT;
+
+ sta_info_free(sta);
+ sta_info_put(sta);
+ } else
+ sta_info_flush(local, dev);
+
+ return 0;
+}
+
+static int ieee80211_change_station(struct wiphy *wiphy,
+ struct net_device *dev,
+ u8 *mac,
+ struct station_parameters *params)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *vlansdata;
+
+ /* XXX: get sta belonging to dev */
+ sta = sta_info_get(local, mac);
+ if (!sta)
+ return -ENOENT;
+
+ if (params->vlan && params->vlan != sta->dev) {
+ vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ vlansdata->vif.type != IEEE80211_IF_TYPE_AP)
+ return -EINVAL;
+
+ sta->dev = params->vlan;
+ ieee80211_send_layer2_update(sta);
+ }
+
+ sta_apply_parameters(local, sta, params);
+
+ sta_info_put(sta);
+
+ return 0;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -433,4 +622,7 @@ struct cfg80211_ops mac80211_config_ops
.add_beacon = ieee80211_add_beacon,
.set_beacon = ieee80211_set_beacon,
.del_beacon = ieee80211_del_beacon,
+ .add_station = ieee80211_add_station,
+ .del_station = ieee80211_del_station,
+ .change_station = ieee80211_change_station,
};
--
next prev parent reply other threads:[~2007-12-19 15:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-19 1:03 [PATCH 0/9] nl80211/cfg80211/mac80211 updates for AP mode Johannes Berg
2007-12-19 1:03 ` [PATCH 1/9] cfg80211/nl80211: introduce key handling Johannes Berg
2007-12-19 1:03 ` [PATCH 2/9] mac80211: support adding/removing keys via cfg80211 Johannes Berg
2007-12-19 1:03 ` [PATCH 3/9] mac80211: support getting key sequence counters " Johannes Berg
2007-12-19 1:03 ` [PATCH 4/9] cfg80211/nl80211: add beacon settings Johannes Berg
2007-12-19 1:03 ` [PATCH 5/9] mac80211: add beacon configuration via cfg80211 Johannes Berg
2007-12-19 1:03 ` [PATCH 6/9] cfg80211/nl80211: station handling Johannes Berg
2007-12-19 1:03 ` Johannes Berg [this message]
2007-12-19 1:03 ` [PATCH 8/9] cfg80211/nl80211: implement station attribute retrieval Johannes Berg
2007-12-19 1:03 ` [PATCH 9/9] mac80211: implement station stats retrieval Johannes Berg
-- strict thread matches above, loose matches on Subject: below --
2007-10-25 9:36 [patch 0/9] initial round of hostapd support patches Johannes Berg
2007-10-25 9:36 ` [patch 7/9] mac80211: implement cfg80211s station handling Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071219010342.459856000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=flamingice@sourmilk.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.