All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] ppc4xx: More cleanup for esd's LCD code
Date: Wed, 2 Jan 2008 12:05:14 +0100	[thread overview]
Message-ID: <200801021205.15309.matthias.fuchs@esd-electronics.com> (raw)

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 board/esd/common/lcd.c |   38 ++++++++++++++++++--------------------
 1 files changed, 18 insertions(+), 20 deletions(-)

diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 4116838..ed50def 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -37,41 +37,41 @@ int lcd_depth;
 unsigned char *glob_lcd_reg;
 unsigned char *glob_lcd_mem;
 
-#ifdef CFG_LCD_ENDIAN
+#if defined(CFG_LCD_ENDIAN)
 void lcd_setup(int lcd, int config)
 {
 	if (lcd == 0) {
 		/*
 		 * Set endianess and reset lcd controller 0 (small)
 		 */
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
+		out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
 		if (config == 1)
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
 		else
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
 		udelay(10); /* wait 10us */
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
+		out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
 	} else {
 		/*
 		 * Set endianess and reset lcd controller 1 (big)
 		 */
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
+		out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
 		udelay(10); /* wait 10us */
 		if (config == 1)
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
 		else
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
 		udelay(10); /* wait 10us */
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
+		out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
 	}
 
 	/*
 	 * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */
 }
-#endif /* #ifdef CFG_LCD_ENDIAN */
+#endif /* CFG_LCD_ENDIAN */
 
 
 void lcd_bmp(uchar *logo_bmp)
@@ -93,7 +93,6 @@ void lcd_bmp(uchar *logo_bmp)
 	 * Check for bmp mark 'BM'
 	 */
 	if (*(ushort *)logo_bmp != 0x424d) {
-
 		/*
 		 * Decompress bmp image
 		 */
@@ -160,7 +159,7 @@ void lcd_bmp(uchar *logo_bmp)
 	 */
 	if ((colors <= 256) && (lcd_depth <= 8)) {
 		ptr = (unsigned char *)(dst + 14 + 40);
-		for (i=0; i<colors; i++) {
+		for (i = 0; i < colors; i++) {
 			b = *ptr++;
 			g = *ptr++;
 			r = *ptr++;
@@ -175,11 +174,11 @@ void lcd_bmp(uchar *logo_bmp)
 	ptr = glob_lcd_mem;
 	ptr2 = (ushort *)glob_lcd_mem;
 	header_size = 14 + 40 + 4*colors;          /* skip bmp header */
-	for (y=0; y<height; y++) {
+	for (y = 0; y < height; y++) {
 		bmp = &dst[(height-1-y)*line_size + header_size];
 		if (lcd_depth == 16) {
 			if (bpp == 24) {
-				for (x=0; x<width; x++) {
+				for (x = 0; x < width; x++) {
 					/*
 					 * Generate epson 16bpp fb-format from 24bpp image
 					 */
@@ -190,7 +189,7 @@ void lcd_bmp(uchar *logo_bmp)
 					*ptr2++ = val;
 				}
 			} else if (bpp == 8) {
-				for (x=0; x<line_size; x++) {
+				for (x = 0; x < line_size; x++) {
 					/* query rgb value from palette */
 					ptr = (unsigned char *)(dst + 14 + 40) ;
 					ptr += (*bmp++) << 2;
@@ -202,9 +201,8 @@ void lcd_bmp(uchar *logo_bmp)
 				}
 			}
 		} else {
-			for (x=0; x<line_size; x++) {
+			for (x = 0; x < line_size; x++)
 				*ptr++ = *bmp++;
-			}
 		}
 	}
 
@@ -254,7 +252,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		palette_value = 0x17;
 		lcd_depth = 8;
 		puts("LCD:   S1D13704");
-	      } else if (in_8(&lcd_reg[0x10000]) == 0x24) {
+	} else if (in_8(&lcd_reg[0x10000]) == 0x24) {
 		/*
 		 * Small epson detected (705)
 		 */
@@ -296,7 +294,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 	lcd_bmp(logo_bmp);
 }
 
-#ifdef CONFIG_VIDEO_SM501
+#if defined(CONFIG_VIDEO_SM501)
 int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong addr;
-- 
1.5.3

             reply	other threads:[~2008-01-02 11:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-02 11:05 Matthias Fuchs [this message]
  -- strict thread matches above, loose matches on Subject: below --
2008-01-02  9:55 [U-Boot-Users] [PATCH] ppc4xx: More cleanup for esd's LCD code Matthias Fuchs
2008-01-02 10:21 ` Wolfgang Denk
2008-01-02 10:28   ` Stefan Roese
2008-01-02 11:01     ` Matthias Fuchs

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200801021205.15309.matthias.fuchs@esd-electronics.com \
    --to=matthias.fuchs@esd-electronics.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.