From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf =?iso-8859-1?q?Bartholom=E4us?= Date: Mon, 07 Jan 2008 08:23:14 +0000 Subject: [lm-sensors] k8temp, BE-2300 CPU Message-Id: <200801070923.18133.ulfbart@gmx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org I've seen the email thread "k8temp, BE-2350 CPU" from begin of Sep. 2007. I= n=20 this was discussed that the output of sensors (with k8temp module) is wrong= :=20 On my PC is the same wrong output with a BE-2300 CPU. Is this known or only= =20 the bug in the named BE-2350? The ticket #2278 - "k8temp shows wrong temperature" - details: I use a MSI K9AG Neo2 Digital Mainboard with Firmware Version 1.5 - details: I use the package "sensors" Version 2.10.4-23 (x86_64) with build date: Sa = 22=20 Sep 2007 02:50:23 CEST - from the OpenSUSE 10.3 repository: # sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +4=B0C Core0 Temp: -1=B0C Core1 Temp: -2=B0C Core1 Temp: -20=B0C # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) X2 Dual Core Processor BE-2300 stepping : 2 cpu MHz : 1000.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca = cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdts= cp=20 lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy=20 misalignsse bogomips : 2067.29 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps processor : 1 [... the same - but "core id : 1" ...] --=20 Ciao Ulf _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors