From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: rjw@sisk.pl
Subject: + acpi-hibernation-call-_pts-before-suspending-devices.patch added to -mm tree
Date: Mon, 07 Jan 2008 16:14:47 -0800 [thread overview]
Message-ID: <200801080014.m080Emtr019380@imap1.linux-foundation.org> (raw)
The patch titled
ACPI hibernation: Call _PTS before suspending devices
has been added to the -mm tree. Its filename is
acpi-hibernation-call-_pts-before-suspending-devices.patch
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: ACPI hibernation: Call _PTS before suspending devices
From: Rafael J. Wysocki <rjw@sisk.pl>
The ACPI 1.0 specification wants us to put devices into low power states after
executing the _PTS global control method, while ACPI 2.0 and later want us to
do that in the reverse order. The current hibernation code follows ACPI 2.0
in that respect which may cause some ACPI 1.0x systems to hang during
hibernation (ref. http://bugzilla.kernel.org/show_bug.cgi?id=9528).
Make the hibernation code execute _PTS before putting devices into low power
states (ie. in accordance with ACPI 1.0x) with the possibility to override
that using the 'acpi_new_pts_ordering' kernel command line option.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/acpi/sleep/main.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff -puN drivers/acpi/sleep/main.c~acpi-hibernation-call-_pts-before-suspending-devices drivers/acpi/sleep/main.c
--- a/drivers/acpi/sleep/main.c~acpi-hibernation-call-_pts-before-suspending-devices
+++ a/drivers/acpi/sleep/main.c
@@ -283,22 +283,34 @@ static struct dmi_system_id __initdata a
#ifdef CONFIG_HIBERNATION
static int acpi_hibernation_begin(void)
{
+ int error;
+
acpi_target_sleep_state = ACPI_STATE_S4;
- return 0;
+ if (new_pts_ordering)
+ return 0;
+
+ error = acpi_sleep_prepare(ACPI_STATE_S4);
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ else
+ acpi_sleep_finish_wake_up = true;
+
+ return error;
}
static int acpi_hibernation_prepare(void)
{
- int error;
-
- error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error)
- return error;
+ if (new_pts_ordering) {
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (!ACPI_SUCCESS(acpi_hw_disable_all_gpes()))
- error = -EFAULT;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+ }
+ acpi_sleep_finish_wake_up = true;
+ }
- return error;
+ return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
}
static int acpi_hibernation_enter(void)
@@ -339,15 +351,17 @@ static void acpi_hibernation_finish(void
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_finish_wake_up = false;
}
static void acpi_hibernation_end(void)
{
/*
* This is necessary in case acpi_hibernation_finish() is not called
- * during a failing transition to the sleep state.
+ * directly during a failing transition to the sleep state.
*/
- acpi_target_sleep_state = ACPI_STATE_S0;
+ if (acpi_sleep_finish_wake_up)
+ acpi_hibernation_finish();
}
static int acpi_hibernation_pre_restore(void)
_
Patches currently in -mm which might be from rjw@sisk.pl are
git-acpi.patch
suspend-introduce-begin-and-end-callbacks.patch
acpi-separate-invocations-of-_gts-and-_bfs-from-_pts-and-_wak.patch
acpi-separate-disabling-of-gpes-from-_pts.patch
acpi-suspend-call-_pts-before-suspending-devices.patch
hibernation-introduce-begin-and-end-callbacks.patch
acpi-hibernation-call-_pts-before-suspending-devices.patch
acpi-print-message-before-calling-_pts.patch
revert-gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch
gregkh-driver-kset-convert-to-kobj_sysfs_ops-vs-git-acpi.patch
git-x86.patch
git-xfs.patch
cpufreq-initialise-default-governor-before-use.patch
page-allocator-clean-up-pcp-draining-functions.patch
page-allocator-clean-up-pcp-draining-functions-swsusp-fix.patch
page-allocator-clean-up-pcp-draining-functions-swsusp-fix-fix.patch
kernel-power-diskc-make-code-static.patch
make-kernel_shutdown_prepare-static.patch
pnp-do-not-stop-start-devices-in-suspend-resume-path.patch
proc-fix-the-threaded-proc-self.patch
shrink_slab-handle-bad-shrinkers.patch
reply other threads:[~2008-01-08 0:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200801080014.m080Emtr019380@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.