All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi"
Date: Tue, 8 Jan 2008 17:30:07 +0300	[thread overview]
Message-ID: <20080108143007.GD11047@localhost.localdomain> (raw)
In-Reply-To: <20080108142634.GA5989@localhost.localdomain>

Also:
- rename "fsl_spi" to "fsl,spi";
- add and use cell-index property, if found;
- split probing code out of fsl_spi_init, thus we can call
  it for legacy device_type probing and new "compatible" probing.

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 Documentation/powerpc/booting-without-of.txt |    8 +-
 arch/powerpc/boot/dts/mpc8313erdb.dts        |    4 +-
 arch/powerpc/boot/dts/mpc832x_mds.dts        |    8 +-
 arch/powerpc/boot/dts/mpc832x_rdb.dts        |    8 +-
 arch/powerpc/boot/dts/mpc8349emitx.dts       |    4 +-
 arch/powerpc/boot/dts/mpc8349emitxgp.dts     |    4 +-
 arch/powerpc/boot/dts/mpc834x_mds.dts        |    4 +-
 arch/powerpc/boot/dts/mpc836x_mds.dts        |    8 +-
 arch/powerpc/boot/dts/mpc8568mds.dts         |    8 +-
 arch/powerpc/sysdev/fsl_soc.c                |   94 ++++++++++++++++----------
 10 files changed, 86 insertions(+), 64 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ed0b92c..2b30611 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1563,8 +1563,8 @@ platforms are moved over to use the flattened-device-tree model.
    ii) SPI (Serial Peripheral Interface)
 
    Required properties:
-   - device_type : should be "spi".
-   - compatible : should be "fsl_spi".
+   - cell-index : SPI controller index.
+   - compatible : should be "fsl,spi".
    - mode : the SPI operation mode, it can be "cpu" or "cpu-qe".
    - reg : Offset and length of the register set for the device
    - interrupts : <a b> where a is the interrupt number and b is a
@@ -1577,8 +1577,8 @@ platforms are moved over to use the flattened-device-tree model.
 
    Example:
 	spi@4c0 {
-		device_type = "spi";
-		compatible = "fsl_spi";
+		cell-index = <0>;
+		compatible = "fsl,spi";
 		reg = <4c0 40>;
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index c5b6665..a0492b6 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -82,8 +82,8 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index cf41194..cc99fb0 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -193,8 +193,8 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = < &qeic >;
@@ -202,8 +202,8 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <1>;
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = < &qeic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 09301c1..c0e5e93 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -183,8 +183,8 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
@@ -192,8 +192,8 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <1>;
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index e354f26..f8fc5f6 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -82,8 +82,8 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index ebdf0b7..666650c 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -80,8 +80,8 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0ba13eb..6ed36a1 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -93,8 +93,8 @@
 		};
 
 		spi@7000 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3eb8f72..be7dfed 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -224,8 +224,8 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = < &qeic >;
@@ -233,8 +233,8 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <1>;
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = < &qeic >;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 2bc147f..84474cb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -301,8 +301,8 @@
 		};
 
 		spi@4c0 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <0>;
+			compatible = "fsl,spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
@@ -310,8 +310,8 @@
 		};
 
 		spi@500 {
-			device_type = "spi";
-			compatible = "fsl_spi";
+			cell-index = <1>;
+			compatible = "fsl,spi";
 			reg = <500 40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 7b13876..cec1ab7 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1226,42 +1226,17 @@ arch_initcall(cpm_smc_uart_of_init);
 #endif /* CONFIG_8xx */
 #endif /* CONFIG_PPC_CPM_NEW_BINDING */
 
-int __init fsl_spi_init(struct spi_board_info *board_infos,
-			unsigned int num_board_infos,
-			void (*activate_cs)(u8 cs, u8 polarity),
-			void (*deactivate_cs)(u8 cs, u8 polarity))
+static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
+				   struct spi_board_info *board_infos,
+				   unsigned int num_board_infos,
+				   void (*activate_cs)(u8 cs, u8 polarity),
+				   void (*deactivate_cs)(u8 cs, u8 polarity))
 {
 	struct device_node *np;
-	unsigned int i;
-	u32 sysclk;
-
-	/* SPI controller is either clocked from QE or SoC clock */
-	sysclk = get_brgfreq();
-	if (sysclk == -1) {
-		const u32 *freq;
-		int size;
-
-		np = of_find_node_by_type(NULL, "soc");
-		if (!np)
-			return -ENODEV;
-
-		freq = of_get_property(np, "clock-frequency", &size);
-		if (!freq || size != sizeof(*freq) || *freq == 0) {
-			freq = of_get_property(np, "bus-frequency", &size);
-			if (!freq || size != sizeof(*freq) || *freq == 0) {
-				of_node_put(np);
-				return -ENODEV;
-			}
-		}
-
-		sysclk = *freq;
-		of_node_put(np);
-	}
+	unsigned int i = 0;
 
-	for (np = NULL, i = 1;
-	     (np = of_find_compatible_node(np, "spi", "fsl_spi")) != NULL;
-	     i++) {
-		int ret = 0;
+	for_each_compatible_node(np, type, compatible) {
+		int ret;
 		unsigned int j;
 		const void *prop;
 		struct resource res[2];
@@ -1280,6 +1255,10 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 			goto err;
 		pdata.bus_num = *(u32 *)prop;
 
+		prop = of_get_property(np, "cell-index", NULL);
+		if (prop)
+			i = *(u32 *)prop;
+
 		prop = of_get_property(np, "mode", NULL);
 		if (prop && !strcmp(prop, "cpu-qe"))
 			pdata.qe_mode = 1;
@@ -1290,7 +1269,7 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 		}
 
 		if (!pdata.max_chipselect)
-			goto err;
+			continue;
 
 		ret = of_address_to_resource(np, 0, &res[0]);
 		if (ret)
@@ -1317,13 +1296,56 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 		if (ret)
 			goto unreg;
 
-		continue;
+		goto next;
 unreg:
 		platform_device_del(pdev);
 err:
-		continue;
+		pr_err("%s: registration failed\n", np->full_name);
+next:
+		i++;
 	}
 
+	return i;
+}
+
+int __init fsl_spi_init(struct spi_board_info *board_infos,
+			unsigned int num_board_infos,
+			void (*activate_cs)(u8 cs, u8 polarity),
+			void (*deactivate_cs)(u8 cs, u8 polarity))
+{
+	u32 sysclk;
+	int ret;
+
+	/* SPI controller is either clocked from QE or SoC clock */
+	sysclk = get_brgfreq();
+	if (sysclk == -1) {
+		struct device_node *np;
+		const u32 *freq;
+		int size;
+
+		np = of_find_node_by_type(NULL, "soc");
+		if (!np)
+			return -ENODEV;
+
+		freq = of_get_property(np, "clock-frequency", &size);
+		if (!freq || size != sizeof(*freq) || *freq == 0) {
+			freq = of_get_property(np, "bus-frequency", &size);
+			if (!freq || size != sizeof(*freq) || *freq == 0) {
+				of_node_put(np);
+				return -ENODEV;
+			}
+		}
+
+		sysclk = *freq;
+		of_node_put(np);
+	}
+
+	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
+			       num_board_infos, activate_cs, deactivate_cs);
+	if (!ret)
+		of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
+				 num_board_infos, activate_cs, deactivate_cs);
+
 	return spi_register_board_info(board_infos, num_board_infos);
 }
 
-- 
1.5.2.2

  parent reply	other threads:[~2008-01-08 14:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-08 14:26 [PATCH v4 0/4] device_type/compatible cleanups Anton Vorontsov
2008-01-08 14:29 ` [PATCH 1/4] [POWERPC] qe_lib and users: get rid of device_types and model Anton Vorontsov
2008-01-08 14:29 ` [PATCH 2/4] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type Anton Vorontsov
2008-01-08 14:30 ` [PATCH 3/4] [POWERPC][SPI] use brg-frequency for SPI in QE Anton Vorontsov
2008-01-08 14:30 ` Anton Vorontsov [this message]
  -- strict thread matches above, loose matches on Subject: below --
2007-12-21 20:18 [PATCH v3 0/4] device_type/compatible cleanups Anton Vorontsov
2007-12-21 20:21 ` [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi" Anton Vorontsov
2007-12-19 20:34 [PATCH 0/4] device_type/compatible cleanups Anton Vorontsov
2007-12-19 20:38 ` [PATCH 4/4] [POWERPC] fsl_spi_init and users: stop using device_type = "spi" Anton Vorontsov
2007-12-19 20:54   ` Kumar Gala
2007-12-19 21:02     ` Anton Vorontsov
2007-12-19 21:04   ` Timur Tabi
2007-12-19 21:12     ` Anton Vorontsov
2007-12-19 21:15       ` Timur Tabi
2007-12-19 21:38       ` Grant Likely
2007-12-19 23:50       ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080108143007.GD11047@localhost.localdomain \
    --to=avorontsov@ru.mvista.com \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.