From: Andi Kleen <andi@firstfloor.org>
To: linux-ide@vger.kernel.org
Subject: libata exception handling messages at boot on qemu
Date: Tue, 8 Jan 2008 20:23:52 +0100 [thread overview]
Message-ID: <20080108192352.GA9110@basil.nowhere.org> (raw)
Is there a workaround for the long ugly boot messages on sees
with libata and qemu (0.9.0 CVS 070719)? It boots eventually, but it looks
quite ugly.
I suppose that's a qemu device model bug or could it be a Linux
problem?
-Andi
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
ata1.00: ATA-7: QEMU HARDDISK, 0.9.0, max UDMA/100
ata1.00: 14062608 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
ata2.00: ATAPI: QEMU CD-ROM, 0.9.0, max UDMA/100
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.9. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 14062608 512-byte hardware sectors (7200 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DP
O or FUA
sd 0:0:0:0: [sda] 14062608 512-byte hardware sectors (7200 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DP
O or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 5
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
...
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
ata2: DRQ=1 with device error, dev_stat 0x49
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 41/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { DRDY ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
next reply other threads:[~2008-01-08 19:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-08 19:23 Andi Kleen [this message]
2008-01-08 20:17 ` libata exception handling messages at boot on qemu Jim Paris
2008-01-08 21:04 ` Alan Cox
2008-01-08 21:21 ` Andi Kleen
2008-01-08 21:19 ` Alan Cox
2008-01-08 21:37 ` Andi Kleen
2008-01-08 21:40 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080108192352.GA9110@basil.nowhere.org \
--to=andi@firstfloor.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.