From: Stephen Hemminger <shemminger@linux-foundation.org>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH 3/4] sky2: support for Yukon Supreme
Date: Thu, 10 Jan 2008 16:14:14 -0800 [thread overview]
Message-ID: <20080111001550.913815702@linux-foundation.org> (raw)
In-Reply-To: 20080111001411.158113585@linux-foundation.org
[-- Attachment #1: sky2-supreme.patch --]
[-- Type: text/plain, Size: 4815 bytes --]
Add support from sk98lin vendor driver 10.50.1.3 for 88E8055 and
88E8075 chips. I don't have this hardware to test, so this changes
are untested.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
---
Please add to staging tree for 2.6.25.
--- a/drivers/net/sky2.c 2008-01-10 15:49:20.000000000 -0800
+++ b/drivers/net/sky2.c 2008-01-10 15:49:27.000000000 -0800
@@ -134,6 +134,8 @@ static const struct pci_device_id sky2_i
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
{ 0 }
};
@@ -547,6 +549,7 @@ static void sky2_phy_init(struct sky2_hw
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_SUPR:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* select page 3 to access LED control register */
@@ -713,23 +716,33 @@ static void sky2_set_tx_stfwd(struct sky
{
struct net_device *dev = hw->dev[port];
- if (dev->mtu <= ETH_DATA_LEN)
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_JUMBO_DIS | TX_STFW_ENA);
+ if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
+ hw->chip_rev != CHIP_REV_YU_EX_A0) ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ /* Yukon-Extreme B0 and further Extreme devices */
+ /* enable Store & Forward mode for TX */
+
+ if (dev->mtu <= ETH_DATA_LEN)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_DIS | TX_STFW_ENA);
- else if (hw->chip_id != CHIP_ID_YUKON_EC_U)
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_STFW_ENA | TX_JUMBO_ENA);
- else {
- /* set Tx GMAC FIFO Almost Empty Threshold */
- sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
- (ECU_JUMBO_WM << 16) | ECU_AE_THR);
+ else
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_ENA| TX_STFW_ENA);
+ } else {
+ if (dev->mtu <= ETH_DATA_LEN)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
+ else {
+ /* set Tx GMAC FIFO Almost Empty Threshold */
+ sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
+ (ECU_JUMBO_WM << 16) | ECU_AE_THR);
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_JUMBO_ENA | TX_STFW_DIS);
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
- /* Can't do offload because of lack of store/forward */
- dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
+ /* Can't do offload because of lack of store/forward */
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
+ }
}
}
@@ -2660,6 +2673,7 @@ static u32 sky2_mhz(const struct sky2_hw
case CHIP_ID_YUKON_EC:
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_SUPR:
return 125;
case CHIP_ID_YUKON_FE:
@@ -2743,6 +2757,15 @@ static int __devinit sky2_init(struct sk
| SKY2_HW_AUTO_TX_SUM
| SKY2_HW_ADV_POWER_CTL;
break;
+
+ case CHIP_ID_YUKON_SUPR:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_AUTO_TX_SUM
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
default:
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
hw->chip_id);
@@ -2813,7 +2836,8 @@ static void sky2_reset(struct sky2_hw *h
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
- if (hw->chip_id == CHIP_ID_YUKON_EX)
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR)
sky2_write16(hw, SK_REG(i, GMAC_CTRL),
GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
| GMC_BYP_RETR_ON);
--- a/drivers/net/sky2.h 2008-01-10 15:49:12.000000000 -0800
+++ b/drivers/net/sky2.h 2008-01-10 15:49:27.000000000 -0800
@@ -425,12 +425,13 @@ enum {
/* B2_CHIP_ID 8 bit Chip Identification Number */
enum {
- CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */
- CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */
- CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */
- CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */
- CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */
- CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */
+ CHIP_ID_YUKON_XL = 0xb3, /* YUKON-2 XL */
+ CHIP_ID_YUKON_EC_U = 0xb4, /* YUKON-2 EC Ultra */
+ CHIP_ID_YUKON_EX = 0xb5, /* YUKON-2 Extreme */
+ CHIP_ID_YUKON_EC = 0xb6, /* YUKON-2 EC */
+ CHIP_ID_YUKON_FE = 0xb7, /* YUKON-2 FE */
+ CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
+ CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
};
enum yukon_ec_rev {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
--
Stephen Hemminger <stephen.hemminger@vyatta.com>
next prev parent reply other threads:[~2008-01-11 3:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-11 0:14 [PATCH 0/4] sky2: version 1.21 Stephen Hemminger
2008-01-11 0:14 ` [PATCH 1/4] sky2: large memory workaround Stephen Hemminger
2008-01-12 22:49 ` Jeff Garzik
2008-01-11 0:14 ` [PATCH 2/4] sky2: remove check for PCI wakeup setting from BIOS Stephen Hemminger
2008-01-11 0:14 ` Stephen Hemminger [this message]
2008-01-18 20:02 ` [PATCH 3/4] sky2: support for Yukon Supreme Jeff Garzik
2008-01-11 0:14 ` [PATCH 4/4] sky2: version 1.21 Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080111001550.913815702@linux-foundation.org \
--to=shemminger@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.