From mboxrd@z Thu Jan 1 00:00:00 1970 From: Len Brown Subject: Re: dmidecode - Presario F500 Date: Fri, 18 Jan 2008 22:34:04 -0500 Message-ID: <200801182234.04941.lenb@kernel.org> References: <213d94420708272103g50320df2l822486d904851d2a@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from hera.kernel.org ([140.211.167.34]:37489 "EHLO hera.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756263AbYASDeT (ORCPT ); Fri, 18 Jan 2008 22:34:19 -0500 In-Reply-To: <213d94420708272103g50320df2l822486d904851d2a@mail.gmail.com> Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Robert Gomulka Cc: linux-acpi@vger.kernel.org On Tuesday 28 August 2007 00:03, Robert Gomulka wrote: > Hello, > my name is Robert Gomulka. I have written to you before, but from > different address (carramba@epf.pl) for which servers have some > problems. This one should be better, I hope. > I was playing around with kernel switches to get my kernel doing its best. > Started from acpi=off, then noapic irqpoll. Now, during this writing, > I am trying "pci=assign-busses". So far it works, so I will keep > testing this configuration. > However, to my surprise, when I switched from "noapic irqpoll" to > "pci=assign-busses" Linux refused to start, demanding acpi_osi=!Linux > and asking for sending dmidecode to you. I added the switch and it > went fine. So hereby you can find dmidecode output in the attachment. > By the way, I have searched internet a lot for some hints what would > be the best way to cope with Linux on similar laptops. There were some > hints, but in my opinion they shouldn't work. People claim they > worked, but they are for different architecture or don't exist. > For example: noirqdebug (only ia-32), assign-busses and irq-route (the > latter I'm not sure, but both should take form of pci=... not the > options alone, however they say that options worked in exactly that > way). Hello Robert If Linux doesn't boot "out of the box" on your system w/o any boot parameter workarounds, it is a Linux bug. So if this is still true, please file it here: http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI It sounds like you are seeing a big difference between "acpi_osi=Linux" (default for 2.6.22 and earlier) vs. "acpi_osi=!Linux" (default for 2.6.23 and later) Is this still true? please send me the output from acpidump. thanks, -Len ps If you don't have acpidump, you can get it from pmtools here: http://www.lesswatts.org/projects/acpi/utilities.php System Information Manufacturer: Hewlett-Packard Product Name: Presario F500 (GF596UA#ABA) Version: Rev 1 Serial Number: CNF72342QC UUID: 434E4637-3233-3432-5143-001B244CFD1C Wake-up Type: Power Switch SKU Number: GF596UA#ABA Family: 103C_5335KV Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: Quanta Product Name: 30D3