From: samuel@sortiz.org
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, irda-users@lists.sourceforge.net,
Adrian Bunk <bunk@kernel.org>
Subject: [PATCH 4/4] [IrDA] Irport removal - part 2
Date: Sat, 19 Jan 2008 01:02:09 +0100 [thread overview]
Message-ID: <20080119000555.818865281@sortiz.org> (raw)
In-Reply-To: 20080119000205.827714764@sortiz.org
[-- Attachment #1: irport_removal_2.patch --]
[-- Type: TEXT/PLAIN, Size: 70720 bytes --]
From: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
---
drivers/net/irda/act200l.c | 297 -----------------------------------
drivers/net/irda/actisys.c | 288 ----------------------------------
drivers/net/irda/ep7211_ir.c | 125 --------------
drivers/net/irda/esi.c | 149 -----------------
drivers/net/irda/girbil.c | 250 -----------------------------
drivers/net/irda/litelink.c | 179 ---------------------
drivers/net/irda/ma600.c | 354 ------------------------------------------
drivers/net/irda/mcp2120.c | 240 ----------------------------
drivers/net/irda/old_belkin.c | 164 -------------------
drivers/net/irda/tekram.c | 282 ---------------------------------
10 files changed, 2328 deletions(-)
Index: net-2.6.25/drivers/net/irda/act200l.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/act200l.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,297 +0,0 @@
-/*********************************************************************
- *
- * Filename: act200l.c
- * Version: 0.8
- * Description: Implementation for the ACTiSYS ACT-IR200L dongle
- * Status: Experimental.
- * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- * Created at: Fri Aug 3 17:35:42 2001
- * Modified at: Fri Aug 17 10:22:40 2001
- * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- *
- * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int act200l_reset(struct irda_task *task);
-static void act200l_open(dongle_t *self, struct qos_info *qos);
-static void act200l_close(dongle_t *self);
-static int act200l_change_speed(struct irda_task *task);
-
-/* Regsiter 0: Control register #1 */
-#define ACT200L_REG0 0x00
-#define ACT200L_TXEN 0x01 /* Enable transmitter */
-#define ACT200L_RXEN 0x02 /* Enable receiver */
-
-/* Register 1: Control register #2 */
-#define ACT200L_REG1 0x10
-#define ACT200L_LODB 0x01 /* Load new baud rate count value */
-#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
-
-/* Register 4: Output Power register */
-#define ACT200L_REG4 0x40
-#define ACT200L_OP0 0x01 /* Enable LED1C output */
-#define ACT200L_OP1 0x02 /* Enable LED2C output */
-#define ACT200L_BLKR 0x04
-
-/* Register 5: Receive Mode register */
-#define ACT200L_REG5 0x50
-#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
-
-/* Register 6: Receive Sensitivity register #1 */
-#define ACT200L_REG6 0x60
-#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
-#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
-
-/* Register 7: Receive Sensitivity register #2 */
-#define ACT200L_REG7 0x70
-#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
-
-/* Register 8,9: Baud Rate Dvider register #1,#2 */
-#define ACT200L_REG8 0x80
-#define ACT200L_REG9 0x90
-
-#define ACT200L_2400 0x5f
-#define ACT200L_9600 0x17
-#define ACT200L_19200 0x0b
-#define ACT200L_38400 0x05
-#define ACT200L_57600 0x03
-#define ACT200L_115200 0x01
-
-/* Register 13: Control register #3 */
-#define ACT200L_REG13 0xd0
-#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
-
-/* Register 15: Status register */
-#define ACT200L_REG15 0xf0
-
-/* Register 21: Control register #4 */
-#define ACT200L_REG21 0x50
-#define ACT200L_EXCK 0x02 /* Disable clock output driver */
-#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
-
-static struct dongle_reg dongle = {
- .type = IRDA_ACT200L_DONGLE,
- .open = act200l_open,
- .close = act200l_close,
- .reset = act200l_reset,
- .change_speed = act200l_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init act200l_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit act200l_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void act200l_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Set the speeds we can accept */
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x03;
-}
-
-static void act200l_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power off the dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function act200l_change_speed (dev, speed)
- *
- * Set the speed for the ACTiSYS ACT-IR200L type dongle.
- *
- */
-static int act200l_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[3];
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- if (irda_task_execute(self, act200l_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
- break;
- case 19200:
- control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
- break;
- case 38400:
- control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
- break;
- case 57600:
- control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
- break;
- case 115200:
- control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
- break;
- }
- control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
-
- /* Write control bytes */
- self->write(self->dev, control, 3);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(5);
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function act200l_reset (driver)
- *
- * Reset the ACTiSYS ACT-IR200L type dongle.
- */
-static int act200l_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u8 control[9] = {
- ACT200L_REG15,
- ACT200L_REG13 | ACT200L_SHDW,
- ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
- ACT200L_REG13,
- ACT200L_REG7 | ACT200L_ENPOS,
- ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
- ACT200L_REG5 | ACT200L_RWIDL,
- ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
- ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
- };
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- /* Reset the dongle : set RTS low for 25 ms */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT2:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- /* Write control bytes */
- self->write(self->dev, control, 9);
- irda_task_next_state(task, IRDA_TASK_WAIT3);
- ret = msecs_to_jiffies(15);
- break;
- case IRDA_TASK_WAIT3:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
-MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize ACTiSYS ACT-IR200L module
- *
- */
-module_init(act200l_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup ACTiSYS ACT-IR200L module
- *
- */
-module_exit(act200l_cleanup);
Index: net-2.6.25/drivers/net/irda/actisys.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/actisys.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,288 +0,0 @@
-/*********************************************************************
- *
- * Filename: actisys.c
- * Version: 1.0
- * Description: Implementation for the ACTiSYS IR-220L and IR-220L+
- * dongles
- * Status: Beta.
- * Authors: Dag Brattli <dagb@cs.uit.no> (initially)
- * Jean Tourrilhes <jt@hpl.hp.com> (new version)
- * Created at: Wed Oct 21 20:02:35 1998
- * Modified at: Fri Dec 17 09:10:43 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- * Copyright (c) 1999 Jean Tourrilhes
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-/*
- * Changelog
- *
- * 0.8 -> 0.9999 - Jean
- * o New initialisation procedure : much safer and correct
- * o New procedure the change speed : much faster and simpler
- * o Other cleanups & comments
- * Thanks to Lichen Wang @ Actisys for his excellent help...
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Define the timing of the pulses we send to the dongle (to reset it, and
- * to toggle speeds). Basically, the limit here is the propagation speed of
- * the signals through the serial port, the dongle being much faster. Any
- * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
- * go through cleanly . If you are on the wild side, you can try to lower
- * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
- */
-#define MIN_DELAY 10 /* 10 us to be on the conservative side */
-
-static int actisys_change_speed(struct irda_task *task);
-static int actisys_reset(struct irda_task *task);
-static void actisys_open(dongle_t *self, struct qos_info *qos);
-static void actisys_close(dongle_t *self);
-
-/* These are the baudrates supported, in the order available */
-/* Note : the 220L doesn't support 38400, but we will fix that below */
-static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-#define MAX_SPEEDS 5
-
-static struct dongle_reg dongle = {
- .type = IRDA_ACTISYS_DONGLE,
- .open = actisys_open,
- .close = actisys_close,
- .reset = actisys_reset,
- .change_speed = actisys_change_speed,
- .owner = THIS_MODULE,
-};
-
-static struct dongle_reg dongle_plus = {
- .type = IRDA_ACTISYS_PLUS_DONGLE,
- .open = actisys_open,
- .close = actisys_close,
- .reset = actisys_reset,
- .change_speed = actisys_change_speed,
- .owner = THIS_MODULE,
-};
-
-/*
- * Function actisys_change_speed (task)
- *
- * There is two model of Actisys dongle we are dealing with,
- * the 220L and 220L+. At this point, only irattach knows with
- * kind the user has requested (it was an argument on irattach
- * command line).
- * So, we register a dongle of each sort and let irattach
- * pick the right one...
- */
-static int __init actisys_init(void)
-{
- int ret;
-
- /* First, register an Actisys 220L dongle */
- ret = irda_device_register_dongle(&dongle);
- if (ret < 0)
- return ret;
- /* Now, register an Actisys 220L+ dongle */
- ret = irda_device_register_dongle(&dongle_plus);
- if (ret < 0) {
- irda_device_unregister_dongle(&dongle);
- return ret;
- }
- return 0;
-}
-
-static void __exit actisys_cleanup(void)
-{
- /* We have to remove both dongles */
- irda_device_unregister_dongle(&dongle);
- irda_device_unregister_dongle(&dongle_plus);
-}
-
-static void actisys_open(dongle_t *self, struct qos_info *qos)
-{
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Set the speeds we can accept */
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-
- /* Remove support for 38400 if this is not a 220L+ dongle */
- if (self->issue->type == IRDA_ACTISYS_DONGLE)
- qos->baud_rate.bits &= ~IR_38400;
-
- qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void actisys_close(dongle_t *self)
-{
- /* Power off the dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function actisys_change_speed (task)
- *
- * Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
- * To cycle through the available baud rates, pulse RTS low for a few us.
- *
- * First, we reset the dongle to always start from a known state.
- * Then, we cycle through the speeds by pulsing RTS low and then up.
- * The dongle allow us to pulse quite fast, se we can set speed in one go,
- * which is must faster ( < 100 us) and less complex than what is found
- * in some other dongle drivers...
- * Note that even if the new speed is the same as the current speed,
- * we reassert the speed. This make sure that things are all right,
- * and it's fast anyway...
- * By the way, this function will work for both type of dongles,
- * because the additional speed is at the end of the sequence...
- */
-static int actisys_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param; /* Target speed */
- int ret = 0;
- int i = 0;
-
- IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, speed,
- self->speed);
-
- /* Go to a known state by reseting the dongle */
-
- /* Reset the dongle : set DTR low for 10 us */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- udelay(MIN_DELAY);
-
- /* Go back to normal mode (we are now at 9600 b/s) */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /*
- * Now, we can set the speed requested. Send RTS pulses until we
- * reach the target speed
- */
- for (i=0; i<MAX_SPEEDS; i++) {
- if (speed == baud_rates[i]) {
- self->speed = baud_rates[i];
- break;
- }
- /* Make sure previous pulse is finished */
- udelay(MIN_DELAY);
-
- /* Set RTS low for 10 us */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- udelay(MIN_DELAY);
-
- /* Set RTS high for 10 us */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- }
-
- /* Check if life is sweet... */
- if (i >= MAX_SPEEDS)
- ret = -1; /* This should not happen */
-
- /* Basta lavoro, on se casse d'ici... */
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return ret;
-}
-
-/*
- * Function actisys_reset (task)
- *
- * Reset the Actisys type dongle. Warning, this function must only be
- * called with a process context!
- *
- * We need to do two things in this function :
- * o first make sure that the dongle is in a state where it can operate
- * o second put the dongle in a know state
- *
- * The dongle is powered of the RTS and DTR lines. In the dongle, there
- * is a big capacitor to accommodate the current spikes. This capacitor
- * takes a least 50 ms to be charged. In theory, the Bios set those lines
- * up, so by the time we arrive here we should be set. It doesn't hurt
- * to be on the conservative side, so we will wait...
- * Then, we set the speed to 9600 b/s to get in a known state (see in
- * change_speed for details). It is needed because the IrDA stack
- * has tried to set the speed immediately after our first return,
- * so before we can be sure the dongle is up and running.
- */
-static int actisys_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Set both DTR & RTS to power up the dongle */
- /* In theory redundant with power up in actisys_open() */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep 50 ms to make sure capacitor is charged */
- ret = msecs_to_jiffies(50);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- break;
- case IRDA_TASK_WAIT:
- /* Reset the dongle : set DTR low for 10 us */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- self->speed = 9600; /* That's the default */
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
-MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
-
-
-/*
- * Function init_module (void)
- *
- * Initialize Actisys module
- *
- */
-module_init(actisys_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Actisys module
- *
- */
-module_exit(actisys_cleanup);
Index: net-2.6.25/drivers/net/irda/ep7211_ir.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/ep7211_ir.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,125 +0,0 @@
-/*
- * IR port driver for the Cirrus Logic EP7211 processor.
- *
- * Copyright 2001, Blue Mug Inc. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000 /* 1 ms */
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos);
-static void ep7211_ir_close(dongle_t *self);
-static int ep7211_ir_change_speed(struct irda_task *task);
-static int ep7211_ir_reset(struct irda_task *task);
-
-static DEFINE_SPINLOCK(ep7211_lock);
-
-static struct dongle_reg dongle = {
- .type = IRDA_EP7211_IR,
- .open = ep7211_ir_open,
- .close = ep7211_ir_close,
- .reset = ep7211_ir_reset,
- .change_speed = ep7211_ir_change_speed,
- .owner = THIS_MODULE,
-};
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
-{
- unsigned int syscon1, flags;
-
- spin_lock_irqsave(&ep7211_lock, flags);
-
- /* Turn on the SIR encoder. */
- syscon1 = clps_readl(SYSCON1);
- syscon1 |= SYSCON1_SIREN;
- clps_writel(syscon1, SYSCON1);
-
- /* XXX: We should disable modem status interrupts on the first
- UART (interrupt #14). */
-
- spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-static void ep7211_ir_close(dongle_t *self)
-{
- unsigned int syscon1, flags;
-
- spin_lock_irqsave(&ep7211_lock, flags);
-
- /* Turn off the SIR encoder. */
- syscon1 = clps_readl(SYSCON1);
- syscon1 &= ~SYSCON1_SIREN;
- clps_writel(syscon1, SYSCON1);
-
- /* XXX: If we've disabled the modem status interrupts, we should
- reset them back to their original state. */
-
- spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-/*
- * Function ep7211_ir_change_speed (task)
- *
- * Change speed of the EP7211 I/R port. We don't really have to do anything
- * for the EP7211 as long as the rate is being changed at the serial port
- * level.
- */
-static int ep7211_ir_change_speed(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
- return 0;
-}
-
-/*
- * Function ep7211_ir_reset (task)
- *
- * Reset the EP7211 I/R. We don't really have to do anything.
- *
- */
-static int ep7211_ir_reset(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
- return 0;
-}
-
-/*
- * Function ep7211_ir_init(void)
- *
- * Initialize EP7211 I/R module
- *
- */
-static int __init ep7211_ir_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-/*
- * Function ep7211_ir_cleanup(void)
- *
- * Cleanup EP7211 I/R module
- *
- */
-static void __exit ep7211_ir_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-MODULE_AUTHOR("Jon McClintock <jonm@bluemug.com>");
-MODULE_DESCRIPTION("EP7211 I/R driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-8"); /* IRDA_EP7211_IR */
-
-module_init(ep7211_ir_init);
-module_exit(ep7211_ir_cleanup);
Index: net-2.6.25/drivers/net/irda/esi.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/esi.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,149 +0,0 @@
-/*********************************************************************
- *
- * Filename: esi.c
- * Version: 1.5
- * Description: Driver for the Extended Systems JetEye PC dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Sat Feb 21 18:54:38 1998
- * Modified at: Fri Dec 17 09:14:04 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
- * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void esi_open(dongle_t *self, struct qos_info *qos);
-static void esi_close(dongle_t *self);
-static int esi_change_speed(struct irda_task *task);
-static int esi_reset(struct irda_task *task);
-
-static struct dongle_reg dongle = {
- .type = IRDA_ESI_DONGLE,
- .open = esi_open,
- .close = esi_close,
- .reset = esi_reset,
- .change_speed = esi_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init esi_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit esi_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void esi_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
-}
-
-static void esi_close(dongle_t *dongle)
-{
- /* Power off dongle */
- dongle->set_dtr_rts(dongle->dev, FALSE, FALSE);
-}
-
-/*
- * Function esi_change_speed (task)
- *
- * Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
- *
- */
-static int esi_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- int dtr, rts;
-
- switch (speed) {
- case 19200:
- dtr = TRUE;
- rts = FALSE;
- break;
- case 115200:
- dtr = rts = TRUE;
- break;
- case 9600:
- default:
- dtr = FALSE;
- rts = TRUE;
- break;
- }
-
- /* Change speed of dongle */
- self->set_dtr_rts(self->dev, dtr, rts);
- self->speed = speed;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function esi_reset (task)
- *
- * Reset dongle;
- *
- */
-static int esi_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize ESI module
- *
- */
-module_init(esi_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup ESI module
- *
- */
-module_exit(esi_cleanup);
-
Index: net-2.6.25/drivers/net/irda/girbil.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/girbil.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,250 +0,0 @@
-/*********************************************************************
- *
- * Filename: girbil.c
- * Version: 1.2
- * Description: Implementation for the Greenwich GIrBIL dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Sat Feb 6 21:02:33 1999
- * Modified at: Fri Dec 17 09:13:20 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int girbil_reset(struct irda_task *task);
-static void girbil_open(dongle_t *self, struct qos_info *qos);
-static void girbil_close(dongle_t *self);
-static int girbil_change_speed(struct irda_task *task);
-
-/* Control register 1 */
-#define GIRBIL_TXEN 0x01 /* Enable transmitter */
-#define GIRBIL_RXEN 0x02 /* Enable receiver */
-#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
-#define GIRBIL_ECHO 0x08 /* Echo control characters */
-
-/* LED Current Register (0x2) */
-#define GIRBIL_HIGH 0x20
-#define GIRBIL_MEDIUM 0x21
-#define GIRBIL_LOW 0x22
-
-/* Baud register (0x3) */
-#define GIRBIL_2400 0x30
-#define GIRBIL_4800 0x31
-#define GIRBIL_9600 0x32
-#define GIRBIL_19200 0x33
-#define GIRBIL_38400 0x34
-#define GIRBIL_57600 0x35
-#define GIRBIL_115200 0x36
-
-/* Mode register (0x4) */
-#define GIRBIL_IRDA 0x40
-#define GIRBIL_ASK 0x41
-
-/* Control register 2 (0x5) */
-#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
-
-static struct dongle_reg dongle = {
- .type = IRDA_GIRBIL_DONGLE,
- .open = girbil_open,
- .close = girbil_close,
- .reset = girbil_reset,
- .change_speed = girbil_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init girbil_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit girbil_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void girbil_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x03;
-}
-
-static void girbil_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function girbil_change_speed (dev, speed)
- *
- * Set the speed for the Girbil type dongle.
- *
- */
-static int girbil_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[2];
- int ret = 0;
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Need to reset the dongle and go to 9600 bps before
- programming */
- if (irda_task_execute(self, girbil_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR and Clear RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = GIRBIL_9600;
- break;
- case 19200:
- control[0] = GIRBIL_19200;
- break;
- case 34800:
- control[0] = GIRBIL_38400;
- break;
- case 57600:
- control[0] = GIRBIL_57600;
- break;
- case 115200:
- control[0] = GIRBIL_115200;
- break;
- }
- control[1] = GIRBIL_LOAD;
-
- /* Write control bytes */
- self->write(self->dev, control, 2);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(100);
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function girbil_reset (driver)
- *
- * This function resets the girbil dongle.
- *
- * Algorithm:
- * 0. set RTS, and wait at least 5 ms
- * 1. clear RTS
- */
-static int girbil_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
- int ret = 0;
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- /* Sleep at least 5 ms */
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT1:
- /* Set DTR and clear RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT2:
- /* Write control byte */
- self->write(self->dev, &control, 1);
- irda_task_next_state(task, IRDA_TASK_WAIT3);
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT3:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Girbil module
- *
- */
-module_init(girbil_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Girbil module
- *
- */
-module_exit(girbil_cleanup);
-
Index: net-2.6.25/drivers/net/irda/litelink.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/litelink.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,179 +0,0 @@
-/*********************************************************************
- *
- * Filename: litelink.c
- * Version: 1.1
- * Description: Driver for the Parallax LiteLink dongle
- * Status: Stable
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Fri May 7 12:50:33 1999
- * Modified at: Fri Dec 17 09:14:23 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000 /* 1 ms */
-
-static void litelink_open(dongle_t *self, struct qos_info *qos);
-static void litelink_close(dongle_t *self);
-static int litelink_change_speed(struct irda_task *task);
-static int litelink_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
-
-static struct dongle_reg dongle = {
- .type = IRDA_LITELINK_DONGLE,
- .open = litelink_open,
- .close = litelink_close,
- .reset = litelink_reset,
- .change_speed = litelink_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init litelink_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit litelink_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void litelink_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void litelink_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function litelink_change_speed (task)
- *
- * Change speed of the Litelink dongle. To cycle through the available
- * baud rates, pulse RTS low for a few ms.
- */
-static int litelink_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- int i;
-
- /* Clear RTS to reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Cycle through avaiable baudrates until we reach the correct one */
- for (i=0; i<5 && baud_rates[i] != speed; i++) {
- /* Set DTR, clear RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
- }
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function litelink_reset (task)
- *
- * Reset the Litelink type dongle.
- *
- */
-static int litelink_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- /* Power on dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Clear RTS to reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* This dongles speed defaults to 115200 bps */
- self->speed = 115200;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Parallax Litelink dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Litelink module
- *
- */
-module_init(litelink_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Litelink module
- *
- */
-module_exit(litelink_cleanup);
Index: net-2.6.25/drivers/net/irda/ma600.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/ma600.c 2008-01-18 09:34:16.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,354 +0,0 @@
-/*********************************************************************
- *
- * Filename: ma600.c
- * Version: 0.1
- * Description: Implementation of the MA600 dongle
- * Status: Experimental.
- * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
- * Created at: Sat Jun 10 20:02:35 2000
- * Modified at:
- * Modified by:
- *
- * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
- * information on the MA600 dongle
- *
- * Copyright (c) 2000 Leung, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-/* define this macro for release version */
-//#define NDEBUG
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#ifndef NDEBUG
- #undef IRDA_DEBUG
- #define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
-
- #undef ASSERT
- #define ASSERT(expr, func) \
- if(!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n",\
- #expr,__FILE__,__FUNCTION__,__LINE__); \
- func}
-#endif
-
-/* convert hex value to ascii hex */
-static const char hexTbl[] = "0123456789ABCDEF";
-
-
-static void ma600_open(dongle_t *self, struct qos_info *qos);
-static void ma600_close(dongle_t *self);
-static int ma600_change_speed(struct irda_task *task);
-static int ma600_reset(struct irda_task *task);
-
-/* control byte for MA600 */
-#define MA600_9600 0x00
-#define MA600_19200 0x01
-#define MA600_38400 0x02
-#define MA600_57600 0x03
-#define MA600_115200 0x04
-#define MA600_DEV_ID1 0x05
-#define MA600_DEV_ID2 0x06
-#define MA600_2400 0x08
-
-static struct dongle_reg dongle = {
- .type = IRDA_MA600_DONGLE,
- .open = ma600_open,
- .close = ma600_close,
- .reset = ma600_reset,
- .change_speed = ma600_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init ma600_init(void)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit ma600_cleanup(void)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
- irda_device_unregister_dongle(&dongle);
-}
-
-/*
- Power on:
- (0) Clear RTS and DTR for 1 second
- (1) Set RTS and DTR for 1 second
- (2) 9600 bps now
- Note: assume RTS, DTR are clear before
-*/
-static void ma600_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
- |IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
- irda_qos_bits_to_value(qos);
-
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
- // should wait 1 second
-
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- // should wait 1 second
-}
-
-static void ma600_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-static __u8 get_control_byte(__u32 speed)
-{
- __u8 byte;
-
- switch (speed) {
- default:
- case 115200:
- byte = MA600_115200;
- break;
- case 57600:
- byte = MA600_57600;
- break;
- case 38400:
- byte = MA600_38400;
- break;
- case 19200:
- byte = MA600_19200;
- break;
- case 9600:
- byte = MA600_9600;
- break;
- case 2400:
- byte = MA600_2400;
- break;
- }
-
- return byte;
-}
-
-/*
- * Function ma600_change_speed (dev, state, speed)
- *
- * Set the speed for the MA600 type dongle. Warning, this
- * function must be called with a process context!
- *
- * Algorithm
- * 1. Reset
- * 2. clear RTS, set DTR and wait for 1ms
- * 3. send Control Byte to the MA600 through TXD to set new baud rate
- * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
- * it takes about 10 msec)
- * 4. set RTS, set DTR (return to NORMAL Operation)
- * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
- * after
- */
-static int ma600_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- static __u8 byte;
- __u8 byte_echo;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- ASSERT(task != NULL, return -1;);
-
- if (self->speed_task && self->speed_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
- return msecs_to_jiffies(10);
- } else {
- self->speed_task = task;
- }
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- case IRDA_TASK_CHILD_INIT:
- /*
- * Need to reset the dongle and go to 9600 bps before
- * programming
- */
- if (irda_task_execute(self, ma600_reset, NULL, task,
- (void *) speed)) {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* give 1 second to finish */
- ret = msecs_to_jiffies(1000);
- } else {
- irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
- }
- break;
-
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
-
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR, Clear RTS */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- ret = msecs_to_jiffies(1); /* Sleep 1 ms */
- irda_task_next_state(task, IRDA_TASK_WAIT);
- break;
-
- case IRDA_TASK_WAIT:
- speed = (__u32) task->param;
- byte = get_control_byte(speed);
-
- /* Write control byte */
- self->write(self->dev, &byte, sizeof(byte));
-
- irda_task_next_state(task, IRDA_TASK_WAIT1);
-
- /* Wait at least 10 ms */
- ret = msecs_to_jiffies(15);
- break;
-
- case IRDA_TASK_WAIT1:
- /* Read control byte echo */
- self->read(self->dev, &byte_echo, sizeof(byte_echo));
-
- if(byte != byte_echo) {
- /* if control byte != echo, I don't know what to do */
- printk(KERN_WARNING "%s() control byte written != read!\n", __FUNCTION__);
- printk(KERN_WARNING "control byte = 0x%c%c\n",
- hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
- printk(KERN_WARNING "byte echo = 0x%c%c\n",
- hexTbl[(byte_echo>>4) & 0x0f],
- hexTbl[byte_echo & 0x0f]);
- #ifndef NDEBUG
- } else {
- IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
- #endif
- }
-
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
-
- /* Wait at least 10 ms */
- ret = msecs_to_jiffies(10);
- break;
-
- case IRDA_TASK_WAIT2:
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
-
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function ma600_reset (driver)
- *
- * This function resets the ma600 dongle. Warning, this function
- * must be called with a process context!!
- *
- * Algorithm:
- * 0. DTR=0, RTS=1 and wait 10 ms
- * 1. DTR=1, RTS=1 and wait 10 ms
- * 2. 9600 bps now
- */
-int ma600_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- ASSERT(task != NULL, return -1;);
-
- if (self->reset_task && self->reset_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
- return msecs_to_jiffies(10);
- } else
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Clear DTR and Set RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(10); /* Sleep 10 ms */
- break;
- case IRDA_TASK_WAIT1:
- /* Set DTR and RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(10); /* Sleep 10 ms */
- break;
- case IRDA_TASK_WAIT2:
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
-MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize MA600 module
- *
- */
-module_init(ma600_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup MA600 module
- *
- */
-module_exit(ma600_cleanup);
-
Index: net-2.6.25/drivers/net/irda/mcp2120.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/mcp2120.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,240 +0,0 @@
-/*********************************************************************
- *
- *
- * Filename: mcp2120.c
- * Version: 1.0
- * Description: Implementation for the MCP2120 (Microchip)
- * Status: Experimental.
- * Author: Felix Tang (tangf@eyetap.org)
- * Created at: Sun Mar 31 19:32:12 EST 2002
- * Based on code by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 2002 Felix Tang, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int mcp2120_reset(struct irda_task *task);
-static void mcp2120_open(dongle_t *self, struct qos_info *qos);
-static void mcp2120_close(dongle_t *self);
-static int mcp2120_change_speed(struct irda_task *task);
-
-#define MCP2120_9600 0x87
-#define MCP2120_19200 0x8B
-#define MCP2120_38400 0x85
-#define MCP2120_57600 0x83
-#define MCP2120_115200 0x81
-
-#define MCP2120_COMMIT 0x11
-
-static struct dongle_reg dongle = {
- .type = IRDA_MCP2120_DONGLE,
- .open = mcp2120_open,
- .close = mcp2120_close,
- .reset = mcp2120_reset,
- .change_speed = mcp2120_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init mcp2120_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit mcp2120_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void mcp2120_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01;
-}
-
-static void mcp2120_close(dongle_t *self)
-{
- /* Power off dongle */
- /* reset and inhibit mcp2120 */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function mcp2120_change_speed (dev, speed)
- *
- * Set the speed for the MCP2120.
- *
- */
-static int mcp2120_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[2];
- int ret = 0;
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Need to reset the dongle and go to 9600 bps before
- programming */
- //printk("Dmcp2120_change_speed irda_task_init\n");
- if (irda_task_execute(self, mcp2120_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR to enter command mode */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- udelay(500);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = MCP2120_9600;
- //printk("mcp2120 9600\n");
- break;
- case 19200:
- control[0] = MCP2120_19200;
- //printk("mcp2120 19200\n");
- break;
- case 34800:
- control[0] = MCP2120_38400;
- //printk("mcp2120 38400\n");
- break;
- case 57600:
- control[0] = MCP2120_57600;
- //printk("mcp2120 57600\n");
- break;
- case 115200:
- control[0] = MCP2120_115200;
- //printk("mcp2120 115200\n");
- break;
- }
- control[1] = MCP2120_COMMIT;
-
- /* Write control bytes */
- self->write(self->dev, control, 2);
-
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(100);
- //printk("mcp2120_change_speed irda_child_done\n");
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- //printk("mcp2120_change_speed irda_task_wait\n");
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function mcp2120_reset (driver)
- *
- * This function resets the mcp2120 dongle.
- *
- * Info: -set RTS to reset mcp2120
- * -set DTR to set mcp2120 software command mode
- * -mcp2120 defaults to 9600 baud after reset
- *
- * Algorithm:
- * 0. Set RTS to reset mcp2120.
- * 1. Clear RTS and wait for device reset timer of 30 ms (max).
- *
- */
-
-
-static int mcp2120_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- //printk("mcp2120_reset irda_task_init\n");
- /* Reset dongle by setting RTS*/
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- //printk("mcp2120_reset irda_task_wait1\n");
- /* clear RTS and wait for at least 30 ms. */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT2:
- //printk("mcp2120_reset irda_task_wait2\n");
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
-MODULE_DESCRIPTION("Microchip MCP2120");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize MCP2120 module
- *
- */
-module_init(mcp2120_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup MCP2120 module
- *
- */
-module_exit(mcp2120_cleanup);
Index: net-2.6.25/drivers/net/irda/old_belkin.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/old_belkin.c 2008-01-18 09:34:17.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,164 +0,0 @@
-/*********************************************************************
- *
- * Filename: old_belkin.c
- * Version: 1.1
- * Description: Driver for the Belkin (old) SmartBeam dongle
- * Status: Experimental...
- * Author: Jean Tourrilhes <jt@hpl.hp.com>
- * Created at: 22/11/99
- * Modified at: Fri Dec 17 09:13:32 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Belkin is selling a dongle called the SmartBeam.
- * In fact, there is two hardware version of this dongle, of course with
- * the same name and looking the exactly same (grrr...).
- * I guess that I've got the old one, because inside I don't have
- * a jumper for IrDA/ASK...
- *
- * As far as I can make it from info on their web site, the old dongle
- * support only 9600 b/s, which make our life much simpler as far as
- * the driver is concerned, but you might not like it very much ;-)
- * The new SmartBeam does 115 kb/s, and I've not tested it...
- *
- * Belkin claim that the correct driver for the old dongle (in Windows)
- * is the generic Parallax 9500a driver, but the Linux LiteLink driver
- * fails for me (probably because Linux-IrDA doesn't rate fallback),
- * so I created this really dumb driver...
- *
- * In fact, this driver doesn't do much. The only thing it does is to
- * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
- * driver is called "old_belkin" so that when the new SmartBeam is supported
- * its driver can be called "belkin" instead of "new_belkin".
- *
- * Note : this driver was written without any info/help from Belkin,
- * so a lot of info here might be totally wrong. Blame me ;-)
- */
-
-/* Let's guess */
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos);
-static void old_belkin_close(dongle_t *self);
-static int old_belkin_change_speed(struct irda_task *task);
-static int old_belkin_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-/* static __u32 baud_rates[] = { 9600 }; */
-
-static struct dongle_reg dongle = {
- .type = IRDA_OLD_BELKIN_DONGLE,
- .open = old_belkin_open,
- .close = old_belkin_close,
- .reset = old_belkin_reset,
- .change_speed = old_belkin_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init old_belkin_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit old_belkin_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos)
-{
- /* Not too fast, please... */
- qos->baud_rate.bits &= IR_9600;
- /* Needs at least 10 ms (totally wild guess, can do probably better) */
- qos->min_turn_time.bits = 0x01;
-}
-
-static void old_belkin_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function old_belkin_change_speed (task)
- *
- * With only one speed available, not much to do...
- */
-static int old_belkin_change_speed(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function old_belkin_reset (task)
- *
- * Reset the Old-Belkin type dongle.
- *
- */
-static int old_belkin_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- /* Power on dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* This dongles speed "defaults" to 9600 bps ;-) */
- self->speed = 9600;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Old-Belkin module
- *
- */
-module_init(old_belkin_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Old-Belkin module
- *
- */
-module_exit(old_belkin_cleanup);
Index: net-2.6.25/drivers/net/irda/tekram.c
===================================================================
--- net-2.6.25.orig/drivers/net/irda/tekram.c 2008-01-18 09:34:16.000000000 +0100
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,282 +0,0 @@
-/*********************************************************************
- *
- * Filename: tekram.c
- * Version: 1.2
- * Description: Implementation of the Tekram IrMate IR-210B dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Wed Oct 21 20:02:35 1998
- * Modified at: Fri Dec 17 09:13:09 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void tekram_open(dongle_t *self, struct qos_info *qos);
-static void tekram_close(dongle_t *self);
-static int tekram_change_speed(struct irda_task *task);
-static int tekram_reset(struct irda_task *task);
-
-#define TEKRAM_115200 0x00
-#define TEKRAM_57600 0x01
-#define TEKRAM_38400 0x02
-#define TEKRAM_19200 0x03
-#define TEKRAM_9600 0x04
-
-#define TEKRAM_PW 0x10 /* Pulse select bit */
-
-static struct dongle_reg dongle = {
- .type = IRDA_TEKRAM_DONGLE,
- .open = tekram_open,
- .close = tekram_close,
- .reset = tekram_reset,
- .change_speed = tekram_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init tekram_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit tekram_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void tekram_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
- irda_qos_bits_to_value(qos);
-}
-
-static void tekram_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-
- if (self->reset_task)
- irda_task_delete(self->reset_task);
- if (self->speed_task)
- irda_task_delete(self->speed_task);
-}
-
-/*
- * Function tekram_change_speed (dev, state, speed)
- *
- * Set the speed for the Tekram IRMate 210 type dongle. Warning, this
- * function must be called with a process context!
- *
- * Algorithm
- * 1. clear DTR
- * 2. set RTS, and wait at least 7 us
- * 3. send Control Byte to the IR-210 through TXD to set new baud rate
- * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
- * it takes about 100 msec)
- * 5. clear RTS (return to NORMAL Operation)
- * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here
- * after
- */
-static int tekram_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 byte;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- if (self->speed_task && self->speed_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
- return msecs_to_jiffies(10);
- } else
- self->speed_task = task;
-
- switch (speed) {
- default:
- case 9600:
- byte = TEKRAM_PW|TEKRAM_9600;
- break;
- case 19200:
- byte = TEKRAM_PW|TEKRAM_19200;
- break;
- case 38400:
- byte = TEKRAM_PW|TEKRAM_38400;
- break;
- case 57600:
- byte = TEKRAM_PW|TEKRAM_57600;
- break;
- case 115200:
- byte = TEKRAM_115200;
- break;
- }
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- case IRDA_TASK_CHILD_INIT:
- /*
- * Need to reset the dongle and go to 9600 bps before
- * programming
- */
- if (irda_task_execute(self, tekram_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- } else
- irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR, Clear RTS */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Wait at least 7us */
- udelay(14);
-
- /* Write control byte */
- self->write(self->dev, &byte, 1);
-
- irda_task_next_state(task, IRDA_TASK_WAIT);
-
- /* Wait at least 100 ms */
- ret = msecs_to_jiffies(150);
- break;
- case IRDA_TASK_WAIT:
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function tekram_reset (driver)
- *
- * This function resets the tekram dongle. Warning, this function
- * must be called with a process context!!
- *
- * Algorithm:
- * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
- * 1. clear RTS
- * 2. set DTR, and wait at least 1 ms
- * 3. clear DTR to SPACE state, wait at least 50 us for further
- * operation
- */
-int tekram_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- if (self->reset_task && self->reset_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
- return msecs_to_jiffies(10);
- } else
- self->reset_task = task;
-
- /* Power off dongle */
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- irda_task_next_state(task, IRDA_TASK_WAIT1);
-
- /* Sleep 50 ms */
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- /* Clear DTR, Set RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
-
- /* Should sleep 1 ms */
- ret = msecs_to_jiffies(1);
- break;
- case IRDA_TASK_WAIT2:
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Wait at least 50 us */
- udelay(75);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Tekram module
- *
- */
-module_init(tekram_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Tekram module
- *
- */
-module_exit(tekram_cleanup);
--
next prev parent reply other threads:[~2008-01-18 16:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-19 0:02 [PATCH 0/4] [IrDA] IrDA fixes for net-2.6.25 samuel-jcdQHdrhKHMdnm+yROfE0A
2008-01-19 0:02 ` [PATCH 1/4] [IrDA] Resend frames on timeout samuel-jcdQHdrhKHMdnm+yROfE0A
2008-01-19 0:02 ` [PATCH 2/4] [IrDA] Frame length validation samuel
2008-01-19 0:02 ` [PATCH 3/4] [IrDA] Irport removal - part 1 samuel-jcdQHdrhKHMdnm+yROfE0A
2008-01-19 0:02 ` samuel [this message]
[not found] ` <20080119000205.827714764-jcdQHdrhKHMdnm+yROfE0A@public.gmane.org>
2008-01-19 8:01 ` [PATCH 0/4] [IrDA] IrDA fixes for net-2.6.25 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080119000555.818865281@sortiz.org \
--to=samuel@sortiz.org \
--cc=bunk@kernel.org \
--cc=davem@davemloft.net \
--cc=irda-users@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.