BUG: soft lockup - CPU#0 stuck for 186s (Re: dmidecode (Samsung R40plus))

[Len Brown <lenb@kernel.org>]

> I downloaded the Vanilla Kernel 2.6.24-rc8, compiled an installed it. It 
> works, but it is the same with it. My Ubuntu need up to 6 Minutes to boot.

that is because twice you locked up.

Did this same failure happen back in 2.6.22?
What is the most recent kernel where this did not happen?

I don't understand this message:
> [  344.253937] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'

Since 2.6.24-rc8 does not contain that symbol.

maybe you should boot a static 2.6.24-rc8 kernel with no drivers
and no initrd and see how that works?

thanks,
-Len

> [    0.000000] Linux version 2.6.24-rc8 (root@ubuntunotebook) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Mon Jan 21 20:07:10 CET 2008
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> [    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 0000000037e90000 (usable)
> [    0.000000]  BIOS-e820: 0000000037e90000 - 0000000037e9e000 (ACPI data)
> [    0.000000]  BIOS-e820: 0000000037e9e000 - 0000000037e9f000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 0000000037e9f000 - 0000000038000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> [    0.000000] 0MB HIGHMEM available.
> [    0.000000] 894MB LOWMEM available.
> [    0.000000] found SMP MP-table at 000f7ea0
> [    0.000000] Entering add_active_range(0, 0, 229008) 0 entries of 256 used
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA             0 ->     4096
> [    0.000000]   Normal       4096 ->   229008
> [    0.000000]   HighMem    229008 ->   229008
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[1] active PFN ranges
> [    0.000000]     0:        0 ->   229008
> [    0.000000] On node 0 totalpages: 229008
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
> [    0.000000]   Normal zone: 1757 pages used for memmap
> [    0.000000]   Normal zone: 223155 pages, LIFO batch:31
> [    0.000000]   HighMem zone: 0 pages used for memmap
> [    0.000000]   Movable zone: 0 pages used for memmap
> [    0.000000] DMI present.
> [    0.000000] ACPI: RSDP 000F7E70, 0014 (r0 PTLTD )
> [    0.000000] ACPI: RSDT 37E97718, 0044 (r1 SECCSD LH43STAR  6040000  LTP        0)
> [    0.000000] ACPI: FACP 37E9DD4E, 0074 (r1 SEC    FIRENZE2  6040000 SEC     F4240)
> [    0.000000] ACPI: DSDT 37E98AE0, 526E (r1    ATI    SB600  6040000 INTL 20050228)
> [    0.000000] ACPI: FACS 37E9EFC0, 0040
> [    0.000000] ACPI: APIC 37E9DDC2, 0054 (r1 PTLTD       APIC    6040000  LTP        0)
> [    0.000000] ACPI: MCFG 37E9DE16, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
> [    0.000000] ACPI: HPET 37E9DE52, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
> [    0.000000] ACPI: SLIC 37E9DE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
> [    0.000000] ACPI: SSDT 37E97D75, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
> [    0.000000] ACPI: SSDT 37E97CCF, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
> [    0.000000] ACPI: SSDT 37E9775C, 0573 (r1  PmRef    CpuPm     3000 INTL 20050228)
> [    0.000000] ATI board detected. Disabling timer routing over 8254.
> [    0.000000] ACPI: PM-Timer IO Port: 0x8008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [    0.000000] Processor #0 6:14 APIC version 20
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [    0.000000] Processor #1 6:14 APIC version 20
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
> [    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227219
> [    0.000000] Kernel command line: root=UUID=62696e7b-6b0b-40fa-96fc-1dbb91d72f6c ro
> [    0.000000] mapped APIC to ffffb000 (fee00000)
> [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [    0.000000] Detected 1729.210 MHz processor.
> [   15.930021] Console: colour VGA+ 80x25
> [   15.930024] console [tty0] enabled
> [   15.933057] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [   15.933570] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [   15.956565] Memory: 862332k/916032k available (2026k kernel code, 53072k reserved, 940k data, 336k init, 0k highmem)
> [   15.956624] virtual kernel memory layout:
> [   15.956625]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
> [   15.956626]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
> [   15.956628]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
> [   15.956629]     lowmem  : 0xc0000000 - 0xf7e90000   ( 894 MB)
> [   15.956630]       .init : 0xc03eb000 - 0xc043f000   ( 336 kB)
> [   15.956631]       .data : 0xc02fabb3 - 0xc03e5d24   ( 940 kB)
> [   15.956632]       .text : 0xc0100000 - 0xc02fabb3   (2026 kB)
> [   15.956971] Checking if this processor honours the WP bit even in supervisor mode... Ok.
> [   15.957091] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> [   15.957287] hpet clockevent registered
> [   16.037262] Calibrating delay using timer specific routine.. 3461.40 BogoMIPS (lpj=6922809)
> [   16.037367] Security Framework initialized
> [   16.037415] SELinux:  Disabled at boot.
> [   16.037469] Mount-cache hash table entries: 512
> [   16.037632] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
> [   16.037641] monitor/mwait feature present.
> [   16.037685] using mwait in idle threads.
> [   16.037730] CPU: L1 I cache: 32K, L1 D cache: 32K
> [   16.037807] CPU: L2 cache: 2048K
> [   16.037851] CPU: Physical Processor ID: 0
> [   16.037894] CPU: Processor Core ID: 0
> [   16.037936] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
> [   16.037945] Compat vDSO mapped to ffffe000.
> [   16.037999] Checking 'hlt' instruction... OK.
> [   16.053704] SMP alternatives: switching to UP code
> [   16.054510] ACPI: Core revision 20070126
> [   17.096953] CPU0: Intel(R) Core(TM) Duo CPU      T2250  @ 1.73GHz stepping 0c
> [   17.097080] SMP alternatives: switching to SMP code
> [   17.097541] Booting processor 1/1 eip 3000
> [   17.107794] Initializing CPU#1
> [   17.184833] Calibrating delay using timer specific routine.. 3458.31 BogoMIPS (lpj=6916634)
> [   17.184841] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
> [   17.184847] monitor/mwait feature present.
> [   17.184851] CPU: L1 I cache: 32K, L1 D cache: 32K
> [   17.184853] CPU: L2 cache: 2048K
> [   17.184855] CPU: Physical Processor ID: 0
> [   17.184856] CPU: Processor Core ID: 1
> [   17.184858] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
> [   17.185341] CPU1: Intel(R) Core(TM) Duo CPU      T2250  @ 1.73GHz stepping 0c
> [   17.185762] Total of 2 processors activated (6919.72 BogoMIPS).
> [   17.185961] ENABLING IO-APIC IRQs
> [   17.186184] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
> [   17.225941] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> [   17.225985] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> [   17.226063] ...trying to set up timer as Virtual Wire IRQ... failed.
> [   17.265860] ...trying to set up timer as ExtINT IRQ... works.
> [   17.512840] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [   17.532930] Brought up 2 CPUs
> [   17.532990] CPU0 attaching sched-domain:
> [   17.532993]  domain 0: span 03
> [   17.532995]   groups: 01 02
> [   17.532999] CPU1 attaching sched-domain:
> [   17.533000]  domain 0: span 03
> [   17.533002]   groups: 02 01
> [   17.533301] net_namespace: 64 bytes
> [   17.533835] Time: 21:38:59  Date: 01/21/08
> [   17.533907] NET: Registered protocol family 16
> [   17.534170] EISA bus registered
> [   17.534215] ACPI: bus type pci registered
> [   17.534348] PCI: Using MMCONFIG
> [   17.535212] Setting up standard PCI resources
> [   17.540361] ACPI: EC: Look up EC in DSDT
> [   17.543493] ACPI: System BIOS is requesting _OSI(Linux)
> [   17.543537] ACPI: If "acpi_osi=Linux" works better,
> [   17.543538] Please send dmidecode to linux-acpi@vger.kernel.org
> [   19.544569] ACPI: Interpreter enabled
> [   19.544613] ACPI: (supports S0 S3 S5)
> [   19.544763] ACPI: Using IOAPIC for interrupt routing
> [   19.545137] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [   19.550808] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
> [   19.550853] ACPI: EC: driver started in interrupt mode
> [   19.550947] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [   19.552478] PCI: Transparent bridge - 0000:00:14.4
> [   19.552608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [   19.552825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> [   19.552973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> [   19.555698] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *0, disabled.
> [   19.556026] ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *0, disabled.
> [   19.556356] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
> [   19.556681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *0, disabled.
> [   19.557006] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
> [   19.557331] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
> [   19.557656] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
> [   19.557980] ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *0, disabled.
> [   19.558323] ACPI: Power Resource [FN00] (off)
> [   19.558425] Linux Plug and Play Support v0.97 (c) Adam Belay
> [   19.558508] pnp: PnP ACPI init
> [   19.558555] ACPI: bus type pnp registered
> [   19.561311] pnp: PnP ACPI: found 11 devices
> [   19.561354] ACPI: ACPI bus type pnp unregistered
> [   19.561399] PnPBIOS: Disabled by ACPI PNP
> [   19.561691] PCI: Using ACPI for IRQ routing
> [   19.561734] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> [   19.587931] NET: Registered protocol family 8
> [   19.587975] NET: Registered protocol family 20
> [   19.588056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [   19.588271] hpet0: 4 32-bit timers, 14318180 Hz
> [   19.591909] Time: tsc clocksource has been installed.
> [   19.591961] Switched to high resolution mode on CPU 0
> [   19.592120] Switched to high resolution mode on CPU 1
> [   19.607819] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
> [   19.607877] system 00:08: ioport range 0x1080-0x1080 has been reserved
> [   19.607922] system 00:08: ioport range 0x220-0x22f has been reserved
> [   19.607966] system 00:08: ioport range 0x40b-0x40b has been reserved
> [   19.608011] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
> [   19.608055] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
> [   19.608100] system 00:08: ioport range 0x530-0x537 has been reserved
> [   19.608144] system 00:08: ioport range 0xc00-0xc01 has been reserved
> [   19.608189] system 00:08: ioport range 0xc14-0xc14 has been reserved
> [   19.608233] system 00:08: ioport range 0xc50-0xc52 has been reserved
> [   19.608278] system 00:08: ioport range 0xc6c-0xc6c has been reserved
> [   19.608322] system 00:08: ioport range 0xc6f-0xc6f has been reserved
> [   19.608367] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
> [   19.608411] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
> [   19.608456] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
> [   19.608500] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
> [   19.608545] system 00:08: ioport range 0xcd8-0xcdf has been reserved
> [   19.608590] system 00:08: ioport range 0x8000-0x805f has been reserved
> [   19.608634] system 00:08: ioport range 0x8210-0x821f has been reserved
> [   19.608679] system 00:08: ioport range 0xf40-0xf47 has been reserved
> [   19.608724] system 00:08: ioport range 0x280-0x293 has been reserved
> [   19.608768] system 00:08: ioport range 0x87f-0x87f has been reserved
> [   19.608826] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
> [   19.608872] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
> [   19.608921] system 00:09: iomem range 0x0-0xfff could not be reserved
> [   19.639430] PCI: Bridge: 0000:00:01.0
> [   19.639473]   IO window: 9000-9fff
> [   19.639516]   MEM window: d0100000-d01fffff
> [   19.639559]   PREFETCH window: d8000000-dfffffff
> [   19.639607] PCI: Bus 3, cardbus bridge: 0000:02:09.0
> [   19.640472]   IO window: 0000a400-0000a4ff
> [   19.640517]   IO window: 0000a800-0000a8ff
> [   19.640562]   PREFETCH window: 40000000-43ffffff
> [   19.640608]   MEM window: 44000000-47ffffff
> [   19.640653] PCI: Bridge: 0000:00:14.4
> [   19.640696]   IO window: a000-afff
> [   19.640741]   MEM window: f0200000-f02fffff
> [   19.640788]   PREFETCH window: f0300000-f03fffff
> [   19.640904] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 16
> [   19.640999] NET: Registered protocol family 2
> [   19.680814] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [   19.681115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [   19.681893] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [   19.682337] TCP: Hash tables configured (established 131072 bind 65536)
> [   19.682382] TCP reno registered
> [   19.692921] checking if image is initramfs... it is
> [   23.495235] Freeing initrd memory: 41191k freed
> [   23.496249] audit: initializing netlink socket (disabled)
> [   23.496308] audit(1200951544.209:1): initialized
> [   23.498732] VFS: Disk quotas dquot_6.5.1
> [   23.498855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [   23.499029] io scheduler noop registered
> [   23.499071] io scheduler anticipatory registered
> [   23.499114] io scheduler deadline registered
> [   23.499166] io scheduler cfq registered (default)
> [   23.499287] Boot video device is 0000:01:05.0
> [   23.499532] isapnp: Scanning for PnP cards...
> [   23.853806] isapnp: No Plug & Play device found
> [   23.878642] Real Time Clock Driver v1.12ac
> [   23.878967] hpet_resources: 0xfed00000 is busy
> [   23.878997] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [   23.880405] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [   23.880526] input: Macintosh mouse button emulation as /class/input/input0
> [   23.880673] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
> [   23.883400] i8042.c: Detected active multiplexing controller, rev 1.1.
> [   23.884803] serio: i8042 KBD port at 0x60,0x64 irq 1
> [   23.884850] serio: i8042 AUX0 port at 0x60,0x64 irq 12
> [   23.884897] serio: i8042 AUX1 port at 0x60,0x64 irq 12
> [   23.884943] serio: i8042 AUX2 port at 0x60,0x64 irq 12
> [   23.884987] serio: i8042 AUX3 port at 0x60,0x64 irq 12
> [   23.899487] mice: PS/2 mouse device common for all mice
> [   23.899661] EISA: Probing bus 0 at eisa.0
> [   23.899711] Cannot allocate resource for EISA slot 1
> [   23.899781] Cannot allocate resource for EISA slot 8
> [   23.899824] EISA: Detected 0 cards.
> [   23.899951] TCP cubic registered
> [   23.900000] NET: Registered protocol family 1
> [   23.900070] Using IPI No-Shortcut mode
> [   23.900254]   Magic number: 8:356:652
> [   23.900664] Freeing unused kernel memory: 336k freed
> [   23.922524] input: AT Translated Set 2 keyboard as /class/input/input1
> [   24.082855] fuse init (API version 7.9)
> [   24.087549] ACPI: Fan [FAN0] (off)
> [   24.093278] ACPI: SSDT 37E98750, 02E6 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
> [   24.093926] ACPI: SSDT 37E97FD4, 06F7 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
> [   24.096045] ACPI: CPU0 (power states: C1[C1] C2[C2])
> [   24.096193] ACPI: Processor [CPU0] (supports 8 throttling states)
> [   24.096545] ACPI: SSDT 37E98A36, 00AA (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
> [   24.096843] ACPI: SSDT 37E986CB, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
> [   24.097599] ACPI: CPU1 (power states: C1[C1] C2[C2])
> [   24.097746] ACPI: Processor [CPU1] (supports 8 throttling states)
> [   24.099633] ACPI: Thermal Zone [TZ00] (53 C)
> [   24.100131] ACPI: Thermal Zone [TZ01] (53 C)
> [   24.464056] SCSI subsystem initialized
> [   24.482064] libata version 3.00 loaded.
> [   24.485390] ahci 0000:00:12.0: version 3.0
> [   24.485425] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
> [   24.485537] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> [   24.485585] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
> [   24.526923] usbcore: registered new interface driver usbfs
> [   24.527002] usbcore: registered new interface driver hub
> [   24.527070] usbcore: registered new device driver usb
> [   24.551925] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> [   24.781965] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [   24.782779] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [   24.793717] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [   25.485782] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> [   25.485864] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part 
> [   25.486341] scsi0 : ahci
> [   25.486602] scsi1 : ahci
> [   25.486793] scsi2 : ahci
> [   25.486973] scsi3 : ahci
> [   25.487107] ata1: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004100 irq 17
> [   25.487159] ata2: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004180 irq 17
> [   25.487210] ata3: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004200 irq 17
> [   25.487260] ata4: SATA max UDMA/133 abar m1024@0xd0004000 port 0xd0004280 irq 17
> [   25.961578] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [   25.970536] ata1.00: ATA-7: SAMSUNG HM120JI, YF100-13, max UDMA7
> [   25.970599] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [   25.976640] ata1.00: configured for UDMA/133
> [   26.285460] ata2: SATA link down (SStatus 0 SControl 300)
> [   26.597344] ata3: SATA link down (SStatus 0 SControl 300)
> [   26.910231] ata4: SATA link down (SStatus 0 SControl 300)
> [   26.910553] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM120JI  YF10 PQ: 0 ANSI: 5
> [   26.911016] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18
> [   26.911113] ohci_hcd 0000:00:13.0: OHCI Host Controller
> [   26.911414] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
> [   26.911484] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0005000
> [   26.918249] Driver 'sd' needs updating - please use bus_type methods
> [   26.926317] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> [   26.926401] sd 0:0:0:0: [sda] Write Protect is off
> [   26.926459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [   26.926496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [   26.926635] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> [   26.926689] sd 0:0:0:0: [sda] Write Protect is off
> [   26.926732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [   26.926748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [   26.926800]  sda:<6>usb usb1: configuration #1 chosen from 1 choice
> [   26.965559] hub 1-0:1.0: USB hub found
> [   26.965623] hub 1-0:1.0: 2 ports detected
> [   27.069355] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19
> [   27.069483] ohci_hcd 0000:00:13.1: OHCI Host Controller
> [   27.069578] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
> [   27.069645] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0006000
> [   27.126353] usb usb2: configuration #1 chosen from 1 choice
> [   27.126461] hub 2-0:1.0: USB hub found
> [   27.126531] hub 2-0:1.0: 2 ports detected
> [   27.230255] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20
> [   27.230376] ohci_hcd 0000:00:13.2: OHCI Host Controller
> [   27.230483] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
> [   27.230546] ohci_hcd 0000:00:13.2: irq 20, io mem 0xd0007000
> [   27.285292] usb usb3: configuration #1 chosen from 1 choice
> [   27.285397] hub 3-0:1.0: USB hub found
> [   27.285468] hub 3-0:1.0: 2 ports detected
> [   27.369067]  sda1 sda2 <<6>usb 1-1: new low speed USB device using ohci_hcd and address 2
> [   27.389208] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19
> [   27.389329] ohci_hcd 0000:00:13.3: OHCI Host Controller
> [   27.389432] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
> [   27.389492] ohci_hcd 0000:00:13.3: irq 19, io mem 0xd0008000
> [   27.396915]  sda5 >
> [   27.397255] sd 0:0:0:0: [sda] Attached SCSI disk
> [   27.411538] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [   27.446333] usb usb4: configuration #1 chosen from 1 choice
> [   27.446434] hub 4-0:1.0: USB hub found
> [   27.446484] hub 4-0:1.0: 2 ports detected
> [   27.550240] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20
> [   27.550383] ohci_hcd 0000:00:13.4: OHCI Host Controller
> [   27.550453] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
> [   27.550517] ohci_hcd 0000:00:13.4: irq 20, io mem 0xd0009000
> [   27.598191] usb 1-1: configuration #1 chosen from 1 choice
> [   27.606217] usb usb5: configuration #1 chosen from 1 choice
> [   27.606326] hub 5-0:1.0: USB hub found
> [   27.606388] hub 5-0:1.0: 2 ports detected
> [   27.709361] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 21
> [   27.710327] ehci_hcd 0000:00:13.5: EHCI Host Controller
> [   27.710413] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
> [   27.710504] ehci_hcd 0000:00:13.5: debug port 1
> [   27.710560] ehci_hcd 0000:00:13.5: irq 21, io mem 0xd0004400
> [   27.711474] kjournald starting.  Commit interval 5 seconds
> [   27.711488] EXT3-fs: mounted filesystem with ordered data mode.
> [   27.721920] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [   27.722102] usb usb6: configuration #1 chosen from 1 choice
> [   27.722172] hub 6-0:1.0: USB hub found
> [   27.722221] hub 6-0:1.0: 10 ports detected
> [   27.826113] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at  PCI slot 0000:00:14.1
> [   27.826205] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
> [   27.826320] SB600_PATA: not 100% native mode: will probe irqs later
> [   27.826371]     ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio
> [   27.826496] Probing IDE interface ide0...
> [   27.857909] usb 1-1: USB disconnect, address 2
> [   28.353786] usbcore: registered new interface driver hiddev
> [   28.664600] usb 1-1: new low speed USB device using ohci_hcd and address 3
> [   28.881741] usb 1-1: configuration #1 chosen from 1 choice
> [   29.196416] usb 1-2: new low speed USB device using ohci_hcd and address 4
> [   29.232778] hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
> [   29.232956] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> [   29.233342] hda: UDMA/33 mode selected
> [   29.233890] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [   29.234968] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
> [   29.235024] 8139cp 0000:02:05.0: Try the "8139too" driver instead.
> [   29.430550] usb 1-2: configuration #1 chosen from 1 choice
> [   29.439825] input: Logitech USB Receiver as /class/input/input2
> [   29.460354] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1
> [   29.471553] input: Logitech USB Receiver as /class/input/input3
> [   29.484377] input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1
> [   29.494799] input: QTRONIX USB Keyboard and Mouse as /class/input/input4
> [   29.504300] input: USB HID v1.00 Keyboard [QTRONIX USB Keyboard and Mouse] on usb-0000:00:13.0-2
> [   29.520435] input: QTRONIX USB Keyboard and Mouse as /class/input/input5
> [   29.544324] input: USB HID v1.00 Mouse [QTRONIX USB Keyboard and Mouse] on usb-0000:00:13.0-2
> [   29.544496] usbcore: registered new interface driver usbhid
> [   29.544557] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> [   40.496373] Linux agpgart interface v0.102
> [   40.543588] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [   40.648784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [   40.686141] input: Power Button (FF) as /class/input/input6
> [   40.740331] ACPI: Power Button (FF) [PWRF]
> [   40.740589] input: Power Button (CM) as /class/input/input7
> [   40.788305] ACPI: Power Button (CM) [PWRB]
> [   40.788415] input: Lid Switch as /class/input/input8
> [   40.804352] ACPI: Lid Switch [LID0]
> [   40.804475] input: Sleep Button (CM) as /class/input/input9
> [   40.868265] ACPI: Sleep Button (CM) [SLPB]
> [   40.872695] ACPI: Battery Slot [BAT1] (battery present)
> [   40.875775] ACPI: AC Adapter [ADP1] (on-line)
> [   41.640961] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> [   41.705712] input: PC Speaker as /class/input/input10
> [   41.942859] 8139too Fast Ethernet driver 0.9.28
> [   41.943228] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 23 (level, low) -> IRQ 22
> [   41.944413] eth0: RealTek RTL8139 at 0xf899a000, 00:13:77:36:d1:f6, IRQ 22
> [   41.944465] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
> [   41.970403] sdhci: Secure Digital Host Controller Interface driver
> [   41.970460] sdhci: Copyright(c) Pierre Ossman
> [   41.970556] sdhci: SDHCI controller found at 0000:02:09.1 [1180:0822] (rev 18)
> [   41.970640] ACPI: PCI Interrupt 0000:02:09.1[C] -> GSI 22 (level, low) -> IRQ 17
> [   41.970756] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
> [   41.970861] mmc0: SDHCI at 0xd0210400 irq 17 DMA
> [   42.054886] Yenta: CardBus bridge found at 0000:02:09.0 [144d:c036]
> [   42.108863] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
> [   42.109131] Uniform CD-ROM driver Revision: 3.20
> [   42.181572] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
> [   42.181623] Socket status: 30000006
> [   42.181667] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
> [   42.181712] cs: IO port probe 0xa000-0xafff: clean.
> [   42.182084] pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
> [   42.182129] pcmcia: parent PCI bridge Memory window: 0xf0300000 - 0xf03fffff
> [   42.820800] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
> [   42.862950] input: SynPS/2 Synaptics TouchPad as /class/input/input11
> [  133.087675] cs: IO port probe 0x100-0x3af: clean.
> [  133.089795] cs: IO port probe 0x3e0-0x4ff: clean.
> [  133.090742] cs: IO port probe 0x820-0x8ff: clean.
> [  133.091522] cs: IO port probe 0xc00-0xcf7: clean.
> [  133.092315] cs: IO port probe 0xa00-0xaff: clean.
> [  140.845947] loop: module loaded
> [  140.935354] lp: driver loaded but no devices found
> [  141.100031] Adding 2642652k swap on /dev/sda5.  Priority:-1 extents:1 across:2642652k
> [  141.478768] EXT3 FS on sda1, internal journal
> [  342.056295] BUG: soft lockup - CPU#0 stuck for 186s! [swapper:0]
> [  342.056360] 
> [  342.056366] Pid: 0, comm: swapper Not tainted (2.6.24-rc8 #1)
> [  342.056372] EIP: 0060:[<f88323b3>] EFLAGS: 00000202 CPU: 0
> [  342.056399] EIP is at acpi_processor_idle+0x2ae/0x45b [processor]
> [  342.056405] EAX: 00000000 EBX: 2aa50ee0 ECX: a424857e EDX: 0000002e
> [  342.056410] ESI: f78acacc EDI: c043e180 EBP: f78ac800 ESP: c03e7f9c
> [  342.056415]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [  342.056420] CR0: 8005003b CR2: b7f25570 CR3: 30e65000 CR4: 00000690
> [  342.056426] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [  342.056431] DR6: ffff0ff0 DR7: 00000400
> [  342.056437]  [<f8832105>] acpi_processor_idle+0x0/0x45b [processor]
> [  342.056454]  [<f8832105>] acpi_processor_idle+0x0/0x45b [processor]
> [  342.056469]  [<c0102633>] cpu_idle+0x53/0xd0
> [  342.056481]  [<c03eba2a>] start_kernel+0x2da/0x360
> [  342.056492]  [<c03eb130>] unknown_bootoption+0x0/0x1f0
> [  342.056505]  =======================
> [  344.106222] No dock devices found.
> [  344.253937] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
> [  345.927756] ppdev: user-space parallel port driver
> [  348.189393] RPC: Registered udp transport module.
> [  348.189398] RPC: Registered tcp transport module.
> [  348.663046] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [  348.858706] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [  348.892293] NFSD: starting 90-second grace period
> [  646.533279] BUG: soft lockup - CPU#0 stuck for 276s! [swapper:0]
> [  646.533357] 
> [  646.533363] Pid: 0, comm: swapper Not tainted (2.6.24-rc8 #1)
> [  646.533368] EIP: 0060:[<f88323b3>] EFLAGS: 00000206 CPU: 0
> [  646.533400] EIP is at acpi_processor_idle+0x2ae/0x45b [processor]
> [  646.533406] EAX: 00000000 EBX: 3f233472 ECX: 8861cc37 EDX: 00000044
> [  646.533411] ESI: f78acacc EDI: c043e180 EBP: f78ac800 ESP: c03e7f9c
> [  646.533417]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> [  646.533422] CR0: 8005003b CR2: f8c1c684 CR3: 1fab5000 CR4: 00000690
> [  646.533427] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [  646.533433] DR6: ffff0ff0 DR7: 00000400
> [  646.533441]  [<f8832105>] acpi_processor_idle+0x0/0x45b [processor]
> [  646.533459]  [<f8832105>] acpi_processor_idle+0x0/0x45b [processor]
> [  646.533475]  [<c0102633>] cpu_idle+0x53/0xd0
> [  646.533489]  [<c03eba2a>] start_kernel+0x2da/0x360
> [  646.533500]  [<c03eb130>] unknown_bootoption+0x0/0x1f0
> [  646.533515]  =======================
> [  668.208102] Bluetooth: Core ver 2.11
> [  668.208555] NET: Registered protocol family 31
> [  668.208562] Bluetooth: HCI device and connection manager initialized
> [  668.208570] Bluetooth: HCI socket layer initialized
> [  668.262602] Bluetooth: L2CAP ver 2.9
> [  668.262610] Bluetooth: L2CAP socket layer initialized
> [  668.364867] Bluetooth: RFCOMM socket layer initialized
> [  668.365131] Bluetooth: RFCOMM TTY layer initialized
> [  668.365137] Bluetooth: RFCOMM ver 1.8
> [  669.473983] NET: Registered protocol family 10
> [  669.474492] lo: Disabled Privacy Extensions
> [ 1794.229358] eth0: link down
> [ 1794.231775] ADDRCONF(NETDEV_UP): eth0: link is not ready
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html