From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model
Date: Thu, 24 Jan 2008 18:39:59 +0300 [thread overview]
Message-ID: <20080124153959.GA23246@localhost.localdomain> (raw)
In-Reply-To: <20080124151850.GA15190@localhost.localdomain>
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data"
and "fsl,qe-ic".
Unfortunately it's still impossible to remove device_type = "qe"
from the existing device trees (except for MPC8360E-RDK), because
older u-boots are looking for it.
Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
Documentation/powerpc/booting-without-of.txt | 11 +++--
arch/powerpc/boot/dts/mpc832x_mds.dts | 9 ++--
arch/powerpc/boot/dts/mpc832x_rdb.dts | 10 +++--
arch/powerpc/boot/dts/mpc836x_mds.dts | 10 +++--
arch/powerpc/boot/dts/mpc836x_rdk.dts | 1 -
arch/powerpc/boot/dts/mpc8568mds.dts | 10 +++--
arch/powerpc/platforms/83xx/mpc832x_mds.c | 11 +++--
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 11 +++--
arch/powerpc/platforms/83xx/mpc836x_mds.c | 11 +++--
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 32 ++++++++-----
arch/powerpc/sysdev/fsl_soc.c | 5 ++-
arch/powerpc/sysdev/qe_lib/qe.c | 63 ++++++++++++++++++--------
12 files changed, 117 insertions(+), 67 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index da98154..f9545b0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1543,7 +1543,7 @@ platforms are moved over to use the flattened-device-tree model.
i) Root QE device
Required properties:
- - device_type : should be "qe";
+ - compatible : should be "fsl,qe";
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
@@ -1557,8 +1557,7 @@ platforms are moved over to use the flattened-device-tree model.
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
- device_type = "qe";
- model = "QE";
+ compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
@@ -1781,7 +1780,7 @@ platforms are moved over to use the flattened-device-tree model.
vii) Multi-User RAM (MURAM)
Required properties:
- - device_type : should be "muram".
+ - compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
- mode : the could be "host" or "slave".
- ranges : Should be defined as specified in 1) to describe the
translation of MURAM addresses.
@@ -1791,10 +1790,12 @@ platforms are moved over to use the flattened-device-tree model.
Example:
muram@10000 {
- device_type = "muram";
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
reg = <0 c000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 6902524..e300df4 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -206,17 +206,18 @@
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
- model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
- device_type = "muram";
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 00004000>;
data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
reg = <0 4000>;
};
};
@@ -320,9 +321,9 @@
};
};
- qeic: qeic@80 {
+ qeic: interrupt-controller@80 {
interrupt-controller;
- device_type = "qeic";
+ compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 10ff7aa..4d5cfd3 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -166,17 +166,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
- model = "QE";
+ compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
- device_type = "muram";
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 00004000>;
data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
reg = <0 4000>;
};
};
@@ -252,9 +254,9 @@
};
};
- qeic:qeic@80 {
+ qeic:interrupt-controller@80 {
interrupt-controller;
- device_type = "qeic";
+ compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 2181d2c..9a2581b 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -207,17 +207,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
- model = "QE";
+ compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
- device_type = "muram";
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
reg = <0 c000>;
};
};
@@ -303,9 +305,9 @@
};
};
- qeic: qeic@80 {
+ qeic: interrupt-controller@80 {
interrupt-controller;
- device_type = "qeic";
+ compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index b8f87ac..e244619 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -145,7 +145,6 @@
qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
- device_type = "qe";
compatible = "fsl,qe";
ranges = <0 0xe0100000 0x100000>;
reg = <0xe0100000 0x480>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 5818a7c..04f5c6f 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -284,17 +284,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
- model = "QE";
+ compatible = "fsl,qe";
ranges = <0 e0080000 00040000>;
reg = <e0080000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
- device_type = "muram";
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
reg = <0 c000>;
};
};
@@ -385,9 +387,9 @@
};
};
- qeic: qeic@80 {
+ qeic: interrupt-controller@80 {
interrupt-controller;
- device_type = "qeic";
+ compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dbdd4ad..6dbc6ea 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .compatible = "fsl,qe", },
{},
};
@@ -134,10 +135,12 @@ static void __init mpc832x_sys_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
-
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 5fddd22..9f0fd88 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .compatible = "fsl,qe", },
{},
};
@@ -145,10 +146,12 @@ void __init mpc832x_rdb_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
-
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index db491ec..c2e5de6 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .compatible = "fsl,qe", },
{},
};
@@ -165,10 +166,12 @@ static void __init mpc836x_mds_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
-
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 4fdf5ab..25f8bc7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -94,21 +94,25 @@ static void __init mpc85xx_mds_setup_arch(void)
#endif
#ifdef CONFIG_QUICC_ENGINE
- if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
- qe_reset();
- of_node_put(np);
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ np = of_find_node_by_name(NULL, "qe");
+ if (!np)
+ return;
}
- if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
- struct device_node *ucc = NULL;
+ qe_reset();
+ of_node_put(np);
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np) {
+ struct device_node *ucc;
par_io_init(np);
of_node_put(np);
- for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;)
+ for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
-
- of_node_put(ucc);
}
if (bcsr_regs) {
@@ -131,7 +135,6 @@ static void __init mpc85xx_mds_setup_arch(void)
iounmap(bcsr_regs);
}
-
#endif /* CONFIG_QUICC_ENGINE */
}
@@ -139,6 +142,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .compatible = "fsl,qe", },
{},
};
@@ -176,10 +180,12 @@ static void __init mpc85xx_mds_pic_init(void)
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
-
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index f2c0988..26f7d83 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -1276,7 +1276,10 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
const u32 *sysclk;
/* SPI controller is either clocked from QE or SoC clock */
- np = of_find_node_by_type(NULL, "qe");
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np)
+ np = of_find_node_by_type(NULL, "qe");
+
if (!np)
np = of_find_node_by_type(NULL, "soc");
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 3925eae..5ef844d 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -65,17 +65,22 @@ static phys_addr_t qebase = -1;
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
+ unsigned int size;
+ const void *prop;
if (qebase != -1)
return qebase;
- qe = of_find_node_by_type(NULL, "qe");
- if (qe) {
- unsigned int size;
- const void *prop = of_get_property(qe, "reg", &size);
- qebase = of_translate_address(qe, prop);
- of_node_put(qe);
- };
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return qebase;
+ }
+
+ prop = of_get_property(qe, "reg", &size);
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
return qebase;
}
@@ -153,16 +158,26 @@ static unsigned int brg_clk = 0;
unsigned int get_brg_clk(void)
{
struct device_node *qe;
+ unsigned int size;
+ const u32 *prop;
+
if (brg_clk)
return brg_clk;
- qe = of_find_node_by_type(NULL, "qe");
- if (qe) {
- unsigned int size;
- const u32 *prop = of_get_property(qe, "brg-frequency", &size);
- brg_clk = *prop;
- of_node_put(qe);
- };
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return brg_clk;
+ }
+
+ prop = of_get_property(qe, "brg-frequency", &size);
+ if (!prop || size != sizeof(*prop))
+ return brg_clk;
+
+ brg_clk = *prop;
+ of_node_put(qe);
+
return brg_clk;
}
@@ -322,7 +337,7 @@ static rh_info_t qe_muram_info;
static void qe_muram_init(void)
{
struct device_node *np;
- u32 address;
+ const u32 *address;
u64 size;
unsigned int flags;
@@ -335,11 +350,21 @@ static void qe_muram_init(void)
/* XXX: This is a subset of the available muram. It
* varies with the processor and the microcode patches activated.
*/
- if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
- address = *of_get_address(np, 0, &size, &flags);
- of_node_put(np);
- rh_attach_region(&qe_muram_info, address, (int) size);
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
+ if (!np) {
+ np = of_find_node_by_name(NULL, "data-only");
+ if (!np) {
+ WARN_ON(1);
+ return;
+ }
}
+
+ address = of_get_address(np, 0, &size, &flags);
+ WARN_ON(!address);
+
+ of_node_put(np);
+ if (address)
+ rh_attach_region(&qe_muram_info, *address, (int)size);
}
/* This function returns an index into the MURAM area.
--
1.5.2.2
next prev parent reply other threads:[~2008-01-24 15:40 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-24 15:18 [PATCH v5 0/5] device_type/compatible cleanups Anton Vorontsov
2008-01-24 15:39 ` Anton Vorontsov [this message]
2008-01-25 21:19 ` [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model Kumar Gala
2008-02-04 13:13 ` Stephen Rothwell
2008-02-04 13:46 ` [PATCH] [POWERPC] qe_lib: fix few fluffy negligences (was: Re: [PATCH 1/5] [POWERPC] qe_lib and users: get rid of most device_types and model) Anton Vorontsov
2008-02-04 14:48 ` Stephen Rothwell
2008-02-06 6:04 ` Kumar Gala
2008-01-24 15:40 ` [PATCH 2/5] [POWERPC][NET] ucc_geth_mii and users: get rid of device_type Anton Vorontsov
2008-01-24 15:52 ` Kumar Gala
2008-01-24 16:11 ` Anton Vorontsov
2008-01-25 21:20 ` Kumar Gala
2008-01-24 15:40 ` [PATCH 3/5] [POWERPC][SPI] use brg-frequency for SPI in QE Anton Vorontsov
2008-01-25 21:20 ` Kumar Gala
2008-01-24 15:40 ` [PATCH 4/5] [POWERPC] fsl_spi_init and users: stop using device_type = "spi" Anton Vorontsov
2008-01-25 21:20 ` Kumar Gala
2008-01-24 15:40 ` [PATCH 5/5] [POWERPC] fsl_soc, legacy_serial: add support for "soc" compatible matching Anton Vorontsov
2008-01-25 16:35 ` Kumar Gala
2008-01-25 17:13 ` Anton Vorontsov
2008-01-25 17:26 ` Anton Vorontsov
2008-01-25 18:17 ` Scott Wood
2008-01-25 18:53 ` Anton Vorontsov
2008-01-25 19:03 ` Scott Wood
2008-01-25 19:18 ` Anton Vorontsov
2008-01-24 17:35 ` [PATCH v5 0/5] device_type/compatible cleanups Anton Vorontsov
2008-01-24 18:26 ` Jon Loeliger
2008-01-25 14:37 ` [PATCH 6/5] [POWERPC] get rid of `model = "UCC"' in the ucc nodes Anton Vorontsov
2008-01-25 16:33 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080124153959.GA23246@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.