From: Frank Seidel <fseidel@suse.de>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@computergmbh.de>,
Greg Kroah-Hartman <gregkh@suse.de>,
jirislaby@gmail.com, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/3] nozomi: constify driver
Date: Fri, 1 Feb 2008 09:13:53 +0100 [thread overview]
Message-ID: <200802010913.53765.fseidel@suse.de> (raw)
In-Reply-To: <200802010909.11634.fseidel@suse.de>
From: Jan Engelhardt <jengelh@computergmbh.de>
nozomi: constify structures and annotate vars
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Frank Seidel <fseidel@suse.de>
---
drivers/char/nozomi.c | 38 ++++++++++++++++++--------------------
1 file changed, 18 insertions(+), 20 deletions(-)
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -395,7 +395,7 @@ struct buffer {
} __attribute__ ((packed));
/* Global variables */
-static struct pci_device_id nozomi_pci_tbl[] = {
+static struct pci_device_id nozomi_pci_tbl[] __devinitdata = {
{PCI_DEVICE(VENDOR1, DEVICE1)},
{},
};
@@ -471,12 +471,12 @@ out:
* -Optimize
* -Rewrite cleaner
*/
-static u32 write_mem32(void __iomem *mem_addr_start, u32 *buf,
+static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
u32 size_bytes)
{
u32 i = 0;
u32 *ptr = (__force u32 *) mem_addr_start;
- u16 *buf16;
+ const u16 *buf16;
if (unlikely(!ptr || !buf))
return 0;
@@ -484,7 +484,7 @@ static u32 write_mem32(void __iomem *mem
/* shortcut for extremely often used cases */
switch (size_bytes) {
case 2: /* 2 bytes */
- buf16 = (u16 *) buf;
+ buf16 = (const u16 *)buf;
writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
return 2;
break;
@@ -501,7 +501,7 @@ static u32 write_mem32(void __iomem *mem
while (i < size_bytes) {
if (size_bytes - i == 2) {
/* 2 bytes */
- buf16 = (u16 *) buf;
+ buf16 = (const u16 *)buf;
writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
i += 2;
} else {
@@ -723,8 +723,7 @@ static int nozomi_read_config_table(stru
/* Enable uplink interrupts */
static void enable_transmit_ul(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
+ static const u16 mask[] = {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier |= mask[port];
@@ -737,8 +736,8 @@ static void enable_transmit_ul(enum port
/* Disable uplink interrupts */
static void disable_transmit_ul(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
+ static const u16 mask[] =
+ {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier &= mask[port];
@@ -751,8 +750,7 @@ static void disable_transmit_ul(enum por
/* Enable downlink interrupts */
static void enable_transmit_dl(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
+ static const u16 mask[] = {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier |= mask[port];
@@ -765,8 +763,8 @@ static void enable_transmit_dl(enum port
/* Disable downlink interrupts */
static void disable_transmit_dl(enum port_type port, struct nozomi *dc)
{
- u16 mask[NOZOMI_MAX_PORTS] = \
- {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
+ static const u16 mask[] =
+ {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL};
if (port < NOZOMI_MAX_PORTS) {
dc->last_ier &= mask[port];
@@ -783,7 +781,7 @@ static void disable_transmit_dl(enum por
static int send_data(enum port_type index, struct nozomi *dc)
{
u32 size = 0;
- struct port *port = &dc->port[index];
+ const struct port *port = &dc->port[index];
u8 toggle = port->toggle_ul;
void __iomem *addr = port->ul_addr[toggle];
u32 ul_size = port->ul_size[toggle];
@@ -1306,7 +1304,7 @@ static void nozomi_setup_private_data(st
static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+ const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
return sprintf(buf, "%d\n", dc->card_type);
}
@@ -1315,7 +1313,7 @@ static DEVICE_ATTR(card_type, S_IRUGO, c
static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
+ const struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev));
return sprintf(buf, "%u\n", dc->open_ttys);
}
@@ -1682,7 +1680,7 @@ static int ntty_write_room(struct tty_st
{
struct port *port = tty->driver_data;
int room = 0;
- struct nozomi *dc = get_dc_by_tty(tty);
+ const struct nozomi *dc = get_dc_by_tty(tty);
if (!dc || !port)
return 0;
@@ -1702,9 +1700,9 @@ exit:
/* Gets io control parameters */
static int ntty_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct port *port = tty->driver_data;
- struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
- struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
+ const struct port *port = tty->driver_data;
+ const struct ctrl_dl *ctrl_dl = &port->ctrl_dl;
+ const struct ctrl_ul *ctrl_ul = &port->ctrl_ul;
return (ctrl_ul->RTS ? TIOCM_RTS : 0) |
(ctrl_ul->DTR ? TIOCM_DTR : 0) |
next prev parent reply other threads:[~2008-02-01 8:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-31 21:10 [PATCH] nozomi: constify driver Frank Seidel
2008-01-31 21:39 ` Jan Engelhardt
2008-02-01 6:25 ` Frank Seidel
2008-02-01 7:28 ` Sam Ravnborg
2008-02-01 7:59 ` Frank Seidel
2008-02-01 8:09 ` [PATCH v2 0/3] nozomi: driver updates to current git tree Frank Seidel
2008-02-01 8:13 ` [PATCH v2 1/3] nozomi: minor cleanups (already in gregkh-2.6) Frank Seidel
2008-02-01 8:13 ` Frank Seidel [this message]
2008-02-01 8:14 ` [PATCH v2 3/3] nozomi: finish constification Frank Seidel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802010913.53765.fseidel@suse.de \
--to=fseidel@suse.de \
--cc=gregkh@suse.de \
--cc=jengelh@computergmbh.de \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.