All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bernhard Reiter <bernhard@intevation.de>
To: debian-powerpc@lists.debian.org
Cc: paulus@samba.org, linuxppc-dev@ozlabs.org
Subject: compile quirk linux-2.6.24 (with workaround)
Date: Sun, 3 Feb 2008 17:29:05 +0100	[thread overview]
Message-ID: <200802031729.12069.bernhard@intevation.de> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 2481 bytes --]

Dear linux powerpc Maintainers and Users,

recently I have tried to compile a new kernel on a Debian sarge ppc
system (PowerBook5,6 MacRISC3 Power Macintosh).

The build system bailed out with
       BOOTCC  arch/powerpc/boot/4xx.o
        cc1: error: bad value (440) for -mcpu= switch
        make[1]: *** [arch/powerpc/boot/4xx.o] Fehler 1

I have tracked this a few steps and the attached patch made the compile for me
as my compiler gcc-Version 3.3.5 (Debian 1:3.3.5-13) 
cannot produce code for 4xx it seems.

The "ARCH=ppc64" I have came about also looked wrong, but I do not know
if this part of the patch is really necessary.
It is just a workaround, as I have no insight of what is really going wrong.

I hope my report is useful,
Bernhard

Details:
I have used "make oldconfig" with a 2.6.17 kernel and answered some questions.
Here is the first section of the .config I've ended up with:


# CONFIG_PPC64 is not set

#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"




-- 
Managing Director - Owner: www.intevation.net       (Free Software Company)
Germany Coordinator: fsfeurope.org. Coordinator: www.Kolab-Konsortium.com.
Intevation GmbH, Osnabrück, DE; Amtsgericht Osnabrück, HRB 18998
Geschäftsführer Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

[-- Attachment #1.2: linux-2.6.24-rc7.fix.diff --]
[-- Type: text/x-diff, Size: 1960 bytes --]

diff -ur linux-2.6.24-rc7/arch/powerpc/boot/Makefile linux-2.6.24-rc7.new/arch/powerpc/boot/Makefile
--- linux-2.6.24-rc7/arch/powerpc/boot/Makefile	2008-01-20 21:31:13.544357150 +0100
+++ linux-2.6.24-rc7.new/arch/powerpc/boot/Makefile	2008-01-15 00:05:14.935750138 +0100
@@ -49,13 +49,13 @@
 src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
-		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
+		mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
 		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
-		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
+		cuboot-pq2.c cuboot-sequoia.c cuboot-bamboo.c \
 		fixed-head.S ep88xc.c cuboot-hpc2.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
Nur in linux-2.6.24-rc7.new/arch/powerpc/boot: zImage.coff.
Nur in linux-2.6.24-rc7.new/arch/powerpc/boot: zImage.miboot.
Nur in linux-2.6.24-rc7.new/arch/powerpc/kernel: vmlinux.lds.
diff -ur linux-2.6.24-rc7/arch/powerpc/Makefile linux-2.6.24-rc7.new/arch/powerpc/Makefile
--- linux-2.6.24-rc7/arch/powerpc/Makefile	2008-01-20 21:31:13.524359050 +0100
+++ linux-2.6.24-rc7.new/arch/powerpc/Makefile	2008-01-14 23:48:30.583750138 +0100
@@ -165,7 +165,8 @@
 boot := arch/$(ARCH)/boot
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) ARCH=powerpc $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+# $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
   @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

             reply	other threads:[~2008-02-03 16:59 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-03 16:29 Bernhard Reiter [this message]
2008-02-04  9:51 ` compile quirk linux-2.6.24 (with workaround) Sven Luther
2008-02-04 10:26   ` Bernhard Reiter
2008-02-04 17:34     ` Grant Likely
2008-02-05 13:08   ` Josh Boyer
2008-02-05 14:39     ` Sven Luther
2008-02-05 15:15       ` Josh Boyer
2008-02-05 15:24         ` Grant Likely
2008-02-05 15:38           ` Josh Boyer
2008-02-05 16:10             ` Olof Johansson
2008-02-06 10:07             ` Bernhard Reiter
2008-02-19  2:52             ` Josh Boyer
2008-02-22 14:50               ` Bernhard Reiter
2008-02-25 11:56                 ` Bernhard Reiter
2008-03-03 17:26                   ` Bernhard Reiter
2008-02-04 21:01 ` Josh Boyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200802031729.12069.bernhard@intevation.de \
    --to=bernhard@intevation.de \
    --cc=debian-powerpc@lists.debian.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.