From: Len Brown <lenb@kernel.org>
To: stable@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2.6.23.stable] ACPI: sync blacklist w/ latest
Date: Mon, 4 Feb 2008 00:38:13 -0500 [thread overview]
Message-ID: <200802040038.14079.lenb@kernel.org> (raw)
From: Len Brown <len.brown@intel.com>
This patch is appropriate for supporting a 2.6.23-based products.
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/blacklist.c | 388 ++++++++++++++++++++++++++++++++++++++++++++-
drivers/acpi/osl.c | 173 +++++++++++++++-----
drivers/firmware/dmi-id.c | 2 -
include/linux/acpi.h | 7 +-
include/linux/dmi.h | 2 +
5 files changed, 523 insertions(+), 49 deletions(-)
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 3ec110c..d2e5298 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -3,6 +3,7 @@
*
* Check to see if the given machine has a known bad ACPI BIOS
* or if the BIOS is too old.
+ * Check given machine against acpi_osi_dmi_table[].
*
* Copyright (C) 2004 Len Brown <len.brown@intel.com>
* Copyright (C) 2002 Andy Grover <andrew.grover@intel.com>
@@ -50,6 +51,8 @@ struct acpi_blacklist_item {
u32 is_critical_error;
};
+static struct dmi_system_id acpi_osi_dmi_table[] __initdata;
+
/*
* POLICY: If *anything* doesn't work, put it on the blacklist.
* If they are critical errors, mark it critical, and abort driver load.
@@ -67,8 +70,6 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
/* IBM 600E - _ADR should return 7, but it returns 1 */
{"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal,
"Incorrect _ADR", 1},
- {"ASUS\0\0", "P2B-S ", 0, ACPI_SIG_DSDT, all_versions,
- "Bogus PCI routing", 1},
{""}
};
@@ -165,5 +166,388 @@ int __init acpi_blacklisted(void)
blacklisted += blacklist_by_year();
+ dmi_check_system(acpi_osi_dmi_table);
+
return blacklisted;
}
+#ifdef CONFIG_DMI
+static int __init dmi_enable_osi_linux(struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(1, d); /* enable */
+ return 0;
+}
+static int __init dmi_disable_osi_linux(struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(0, d); /* disable */
+ return 0;
+}
+static int __init dmi_unknown_osi_linux(struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(-1, d); /* unknown */
+ return 0;
+}
+
+/*
+ * Most BIOS that invoke OSI(Linux) do nothing with it.
+ * But some cause Linux to break.
+ * Only a couple use it to make Linux run better.
+ *
+ * Thus, Linux should continue to disable OSI(Linux) by default,
+ * should continue to discourage BIOS writers from using it, and
+ * should whitelist the few existing systems that require it.
+ *
+ * If it appears clear a vendor isn't using OSI(Linux)
+ * for anything constructive, blacklist them by name to disable
+ * unnecessary dmesg warnings on all of their products.
+ */
+
+static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
+ /*
+ * Disable OSI(Linux) warnings on all "Acer, inc."
+ *
+ * _OSI(Linux) disables the latest Windows BIOS code:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
+ */
+ /*
+ * note that dmi_check_system() uses strstr()
+ * to match sub-strings rather than !strcmp(),
+ * so "Acer" below matches "Acer, inc." above.
+ */
+ /*
+ * Disable OSI(Linux) warnings on all "Acer"
+ *
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Acer",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Apple",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "BenQ"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "BenQ",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Clevo Co."
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Clevo",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "COMPAL"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Compal",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+ },
+ },
+ { /* OSI(Linux) touches USB, unknown side-effect */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell Dimension 5150",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
+ },
+ },
+ { /* OSI(Linux) is a NOP */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
+ },
+ },
+ { /* OSI(Linux) touches USB */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
+ },
+ },
+ { /* OSI(Linux) is a NOP */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell Vostro 1000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dialogue Flybook V5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
+ *
+ * _OSI(Linux) disables latest Windows BIOS code:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Fujitsu Siemens",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Hewlett-Packard"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * .ident = "HP Pavilion tx 1000"
+ * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
+ * .ident = "HP Pavilion dv2000"
+ * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
+ * .ident = "HP Pavilion dv5000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
+ * .ident = "HP Pavilion dv6300 30BC",
+ * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
+ * .ident = "HP Pavilion dv6000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
+ * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
+ * .ident = "HP Pavilion dv9000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
+ * .ident = "HP Pavilion dv9500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
+ * .ident = "HP/Compaq Presario C500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
+ * .ident = "HP/Compaq Presario F500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
+ * _OSI(Linux) unknown effect:
+ * .ident = "HP Pavilion dv6500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Hewlett-Packard",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ },
+ },
+ /*
+ * Lenovo has a mix of systems OSI(Linux) situations
+ * and thus we can not wildcard the vendor.
+ *
+ * _OSI(Linux) helps sound
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ */
+ {
+ .callback = dmi_enable_osi_linux,
+ .ident = "Lenovo ThinkPad R61",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
+ },
+ },
+ {
+ .callback = dmi_enable_osi_linux,
+ .ident = "Lenovo ThinkPad T61",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
+ },
+ },
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Lenovo 3000 V100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
+ },
+ },
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Lenovo 3000 N100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "LG Electronics"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
+ * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
+ *
+ * unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
+ * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "LG",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+ },
+ },
+ /* NEC - OSI(Linux) effect unknown */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "NEC VERSA M360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Samsung Electronics"
+ *
+ * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Samsung",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Sony Corporation"
+ *
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Sony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "TOSHIBA"
+ *
+ * _OSI(Linux) breaks sound (bugzilla 7787):
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Toshiba",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ },
+ },
+ {}
+};
+
+#endif /* CONFIG_DMI */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 12c09fa..cd573e4 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -77,11 +77,55 @@ static struct workqueue_struct *kacpi_notify_wq;
#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
-static int osi_linux; /* disable _OSI(Linux) by default */
+/*
+ * "Ode to _OSI(Linux)"
+ *
+ * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ *
+ * As Linux evolves, the features that it supports change.
+ * So an OSI string such as "Linux" is not specific enough
+ * to be useful across multiple versions of Linux. It
+ * doesn't identify any particular feature, interface,
+ * or even any particular version of Linux...
+ *
+ * Unfortunately, Linux-2.6.22 and earlier responded "yes"
+ * to a BIOS _OSI(Linux) query. When
+ * a reference mobile BIOS started using it, its use
+ * started to spread to many vendor platforms.
+ * As it is not supportable, we need to halt that spread.
+ *
+ * Today, most BIOS references to _OSI(Linux) are noise --
+ * they have no functional effect and are just dead code
+ * carried over from the reference BIOS.
+ *
+ * The next most common case is that _OSI(Linux) harms Linux,
+ * usually by causing the BIOS to follow paths that are
+ * not tested during Windows validation.
+ *
+ * Finally, there is a short list of platforms
+ * where OSI(Linux) benefits Linux.
+ *
+ * In Linux-2.6.23, OSI(Linux) is first disabled by default.
+ * DMI is used to disable the dmesg warning about OSI(Linux)
+ * on platforms where it is known to have no effect.
+ * But a dmesg warning remains for systems where
+ * we do not know if OSI(Linux) is good or bad for the system.
+ * DMI is also used to enable OSI(Linux) for the machines
+ * that are known to need it.
+ *
+ * BIOS writers should NOT query _OSI(Linux) on future systems.
+ * It will be ignored by default, and to get Linux to
+ * not ignore it will require a kernel source update to
+ * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ */
+#define OSI_LINUX_ENABLE 0
-#ifdef CONFIG_DMI
-static struct __initdata dmi_system_id acpi_osl_dmi_table[];
-#endif
+static struct osi_linux {
+ unsigned int enable:1;
+ unsigned int dmi:1;
+ unsigned int cmdline:1;
+ unsigned int known:1;
+} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
@@ -133,7 +177,6 @@ device_initcall(acpi_reserve_resources);
acpi_status __init acpi_os_initialize(void)
{
- dmi_check_system(acpi_osl_dmi_table);
return AE_OK;
}
@@ -971,13 +1014,37 @@ static int __init acpi_os_name_setup(char *str)
__setup("acpi_os_name=", acpi_os_name_setup);
-static void enable_osi_linux(int enable) {
+static void __init set_osi_linux(unsigned int enable)
+{
+ if (osi_linux.enable != enable) {
+ osi_linux.enable = enable;
+ printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
+ enable ? "Add": "Delet");
+ }
+ return;
+}
- if (osi_linux != enable)
- printk(KERN_INFO PREFIX "%sabled _OSI(Linux)\n",
- enable ? "En": "Dis");
+static void __init acpi_cmdline_osi_linux(unsigned int enable)
+{
+ osi_linux.cmdline = 1; /* cmdline set the default */
+ set_osi_linux(enable);
+
+ return;
+}
+
+void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
+{
+ osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
+
+ printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
+
+ if (enable == -1)
+ return;
+
+ osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
+
+ set_osi_linux(enable);
- osi_linux = enable;
return;
}
@@ -994,12 +1061,12 @@ static int __init acpi_osi_setup(char *str)
printk(KERN_INFO PREFIX "_OSI method disabled\n");
acpi_gbl_create_osi_method = FALSE;
} else if (!strcmp("!Linux", str)) {
- enable_osi_linux(0);
+ acpi_cmdline_osi_linux(0); /* !enable */
} else if (*str == '!') {
if (acpi_osi_invalidate(++str) == AE_OK)
printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
} else if (!strcmp("Linux", str)) {
- enable_osi_linux(1);
+ acpi_cmdline_osi_linux(1); /* enable */
} else if (*osi_additional_string == '\0') {
strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX);
printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
@@ -1156,6 +1223,34 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
return (AE_OK);
}
+/**
+ * acpi_dmi_dump - dump DMI slots needed for blacklist entry
+ *
+ * Returns 0 on success
+ */
+static int acpi_dmi_dump(void)
+{
+
+ if (!dmi_available)
+ return -1;
+
+ printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
+ dmi_get_system_info(DMI_SYS_VENDOR));
+ printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
+ dmi_get_system_info(DMI_PRODUCT_NAME));
+ printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
+ dmi_get_system_info(DMI_BOARD_NAME));
+ printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR));
+ printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
+ dmi_get_system_info(DMI_BIOS_DATE));
+
+ return 0;
+}
+
+
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
@@ -1175,13 +1270,29 @@ acpi_os_validate_interface (char *interface)
if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX))
return AE_OK;
if (!strcmp("Linux", interface)) {
- printk(KERN_WARNING PREFIX
- "System BIOS is requesting _OSI(Linux)\n");
- printk(KERN_WARNING PREFIX
- "If \"acpi_osi=Linux\" works better,\n"
- "Please send dmidecode "
- "to linux-acpi@vger.kernel.org\n");
- if(osi_linux)
+
+ printk(KERN_NOTICE PREFIX
+ "BIOS _OSI(Linux) query %s%s\n",
+ osi_linux.enable ? "honored" : "ignored",
+ osi_linux.cmdline ? " via cmdline" :
+ osi_linux.dmi ? " via DMI" : "");
+
+ if (!osi_linux.dmi) {
+ if (acpi_dmi_dump())
+ printk(KERN_NOTICE PREFIX
+ "[please extract dmidecode output]\n");
+ printk(KERN_NOTICE PREFIX
+ "Please send DMI info above to "
+ "linux-acpi@vger.kernel.org\n");
+ }
+ if (!osi_linux.known && !osi_linux.cmdline) {
+ printk(KERN_NOTICE PREFIX
+ "If \"acpi_osi=%sLinux\" works better, "
+ "please notify linux-acpi@vger.kernel.org\n",
+ osi_linux.enable ? "!" : "");
+ }
+
+ if (osi_linux.enable)
return AE_OK;
}
return AE_SUPPORT;
@@ -1213,28 +1324,4 @@ acpi_os_validate_address (
return AE_OK;
}
-#ifdef CONFIG_DMI
-static int dmi_osi_linux(struct dmi_system_id *d)
-{
- printk(KERN_NOTICE "%s detected: enabling _OSI(Linux)\n", d->ident);
- enable_osi_linux(1);
- return 0;
-}
-
-static struct dmi_system_id acpi_osl_dmi_table[] __initdata = {
- /*
- * Boxes that need _OSI(Linux)
- */
- {
- .callback = dmi_osi_linux,
- .ident = "Intel Napa CRB",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "MPAD-MSAE Customer Reference Boards"),
- },
- },
- {}
-};
-#endif /* CONFIG_DMI */
-
#endif
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
index 59c3b5a..ed0d030 100644
--- a/drivers/firmware/dmi-id.c
+++ b/drivers/firmware/dmi-id.c
@@ -159,8 +159,6 @@ static struct device *dmi_dev;
if (dmi_get_system_info(_field)) \
sys_dmi_attributes[i++] = & sys_dmi_##_name##_attr.attr;
-extern int dmi_available;
-
static int __init dmi_id_init(void)
{
int ret, i;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index bf5e000..919e0a5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -40,6 +40,7 @@
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_numa.h>
#include <asm/acpi.h>
+#include <linux/dmi.h>
#ifdef CONFIG_ACPI
@@ -187,7 +188,9 @@ extern int ec_transaction(u8 command,
#endif /*CONFIG_ACPI_EC*/
extern int acpi_blacklisted(void);
-extern void acpi_bios_year(char *s);
+#ifdef CONFIG_DMI
+extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
+#endif
#define ACPI_CSTATE_LIMIT_DEFINED /* for driver builds */
#ifdef CONFIG_ACPI
@@ -247,5 +250,5 @@ static inline int acpi_boot_table_init(void)
return 0;
}
-#endif /* CONFIG_ACPI */
+#endif /* !CONFIG_ACPI */
#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index b8ac7b0..d8a946f 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -78,6 +78,7 @@ extern struct dmi_device * dmi_find_device(int type, const char *name,
extern void dmi_scan_machine(void);
extern int dmi_get_year(int field);
extern int dmi_name_in_vendors(char *str);
+extern int dmi_available;
#else
@@ -87,6 +88,7 @@ static inline struct dmi_device * dmi_find_device(int type, const char *name,
struct dmi_device *from) { return NULL; }
static inline int dmi_get_year(int year) { return 0; }
static inline int dmi_name_in_vendors(char *s) { return 0; }
+#define dmi_available 0
#endif
--
1.5.4.rc5.16.gc0279
reply other threads:[~2008-02-04 6:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802040038.14079.lenb@kernel.org \
--to=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.