From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
sam@ravnborg.org, apw@shadowen.org, balbir@linux.vnet.ibm.com
Subject: Re: [PATCH] 2.6.24-mm1 section type conflict cleanup
Date: Mon, 4 Feb 2008 21:52:23 +0530 [thread overview]
Message-ID: <20080204162223.GA6888@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080203171634.58ab668b.akpm@linux-foundation.org>
Hi Andrew,
The 2.6.24-mm1 kernel build fails at many places with section type
conflict build error.
drivers/net/typhoon.c:181: error: typhoon_card_info causes a section type conflict
make[2]: *** [drivers/net/typhoon.o] Error 1
drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict
make[2]: *** [drivers/net/natsemi.o] Error 1
drivers/net/bnx2.c:95: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2.o] Error 1
drivers/net/bnx2x.c:112: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2x.o] Error 1
drivers/net/bnx2x.c:112: error: board_info causes a section type conflict
make[2]: *** [drivers/net/bnx2x.o] Error 1
drivers/net/via-velocity.c:453: error: velocity_id_table causes a section type conflict
make[2]: *** [drivers/net/via-velocity.o] Error 1
drivers/net/starfire.c:350: error: netdrv_tbl causes a section type conflict
make[2]: *** [drivers/net/starfire.o] Error 1
I have tested the patch for build test only
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
--
--- linux-2.6.24/drivers/net/typhoon.c 2008-01-25 04:28:37.000000000 +0530
+++ linux-2.6.24/drivers/net/~typhoon.c 2008-02-04 16:21:55.000000000 +0530
@@ -178,7 +178,7 @@ enum typhoon_cards {
};
/* directly indexed by enum typhoon_cards, above */
-static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
+static const struct typhoon_card_info typhoon_card_info[] __devinitconst = {
{ "3Com Typhoon (3C990-TX)",
TYPHOON_CRYPTO_NONE},
{ "3Com Typhoon (3CR990-TX-95)",
--- linux-2.6.24/drivers/net/natsemi.c 2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~natsemi.c 2008-02-04 16:36:22.000000000 +0530
@@ -242,7 +242,7 @@ static const struct {
const char *name;
unsigned long flags;
unsigned int eeprom_size;
-} natsemi_pci_info[] __devinitdata = {
+} natsemi_pci_info[] __devinitconst = {
{ "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 },
{ "NatSemi DP8381[56]", 0, 24 },
};
--- linux-2.6.24/drivers/net/bnx2.c 2008-02-04 14:56:59.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2.c 2008-02-04 16:44:02.000000000 +0530
@@ -92,7 +92,7 @@ typedef enum {
/* indexed by board_t, above */
static const struct {
char *name;
-} board_info[] __devinitdata = {
+} board_info[] __devinitconst = {
{ "Broadcom NetXtreme II BCM5706 1000Base-T" },
{ "HP NC370T Multifunction Gigabit Server Adapter" },
{ "HP NC370i Multifunction Gigabit Server Adapter" },
--- linux-2.6.24/drivers/net/bnx2.c 2008-02-04 16:44:47.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2.c 2008-02-04 16:47:08.000000000 +0530
@@ -104,7 +104,7 @@ static const struct {
{ "Broadcom NetXtreme II BCM5709 1000Base-SX" },
};
-static struct pci_device_id bnx2_pci_tbl[] = {
+static struct pci_device_id bnx2_pci_tbl[] __devinitconst = {
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
--- linux-2.6.24/drivers/net/bnx2x.c 2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~bnx2x.c 2008-02-04 18:01:14.000000000 +0530
@@ -109,7 +109,7 @@ enum bnx2x_board_type {
/* indexed by board_t, above */
static const struct {
char *name;
-} board_info[] __devinitdata = {
+} board_info[] __devinitconst = {
{ "Broadcom NetXtreme II BCM57710 XGb" }
};
--- linux-2.6.24/drivers/net/starfire.c 2008-01-25 04:28:37.000000000 +0530
+++ linux-2.6.24/drivers/net/~starfire.c 2008-02-04 18:08:08.000000000 +0530
@@ -347,7 +347,7 @@ MODULE_DEVICE_TABLE(pci, starfire_pci_tb
static const struct chip_info {
const char *name;
int drv_flags;
-} netdrv_tbl[] __devinitdata = {
+} netdrv_tbl[] __devinitconst = {
{ "Adaptec Starfire 6915", CanHaveMII },
};
--- linux-2.6.24/drivers/net/via-velocity.c 2008-02-04 14:57:00.000000000 +0530
+++ linux-2.6.24/drivers/net/~via-velocity.c 2008-02-04 18:04:21.000000000 +0530
@@ -450,7 +450,7 @@ static const struct velocity_info_tbl ch
* device driver. Used for hotplug autoloading.
*/
-static const struct pci_device_id velocity_id_table[] __devinitdata = {
+static const struct pci_device_id velocity_id_table[] __devinitconst = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
{ }
};
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next prev parent reply other threads:[~2008-02-04 16:22 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-04 1:16 2.6.24-mm1 Andrew Morton
2008-02-04 3:55 ` 2.6.24-mm1 Build Faliure on pgtable_32.c Kamalesh Babulal
2008-02-04 3:55 ` Kamalesh Babulal
2008-02-04 4:31 ` Balbir Singh
2008-02-04 4:31 ` Balbir Singh
2008-02-04 7:36 ` 2.6.24-mm1 Ingo Molnar
2008-02-04 16:22 ` Kamalesh Babulal [this message]
2008-02-04 18:04 ` [PATCH] 2.6.24-mm1 section type conflict cleanup Sam Ravnborg
2008-02-05 4:49 ` Kamalesh Babulal
2008-02-04 20:29 ` 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem' Mariusz Kozlowski
2008-02-04 20:29 ` Mariusz Kozlowski
2008-02-04 22:40 ` Andrew Morton
2008-02-04 22:40 ` Andrew Morton
2008-02-05 13:00 ` Sergei Shtylyov
2008-02-05 13:00 ` Sergei Shtylyov
2008-02-05 13:25 ` Bernhard Walle
2008-02-05 13:25 ` Bernhard Walle
2008-02-04 21:56 ` 2.6.24-mm1: module params broken Hugh Dickins
2008-02-04 23:06 ` Andrew Morton
2008-02-05 0:06 ` Hugh Dickins
2008-02-05 0:16 ` Andrew Morton
2008-02-04 22:23 ` 2.6.24-mm1 - build error, AMD MCE using Intel ifdef'd log function Zan Lynx
2008-02-04 23:10 ` Andrew Morton
2008-02-04 22:32 ` 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598 Tilman Schmidt
2008-02-04 23:25 ` Andrew Morton
2008-02-05 7:24 ` Rami Rosen
2008-02-05 16:20 ` [uml-devel] [-mm Patch] arch/um/kernel/mem.c: fix a shadowed variable WANG Cong
2008-02-05 16:20 ` WANG Cong
2008-02-05 16:25 ` [uml-devel] [-mm Patch] arch/um/kernel/initrd.c: fix a missed conversion specifier WANG Cong
2008-02-05 16:25 ` WANG Cong
2008-02-05 16:59 ` [uml-devel] " Jeff Dike
2008-02-05 16:59 ` Jeff Dike
2008-02-05 16:53 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 17:01 ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 19:48 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 19:50 ` 2.6.24-mm1 Arjan van de Ven
2008-02-05 21:25 ` 2.6.24-mm1 Valdis.Kletnieks
2008-02-05 20:19 ` 2.6.24-mm1 Andrew Morton
2008-02-06 11:13 ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-06 11:15 ` 2.6.24-mm1 Ingo Molnar
2008-02-06 11:19 ` 2.6.24-mm1 KOSAKI Motohiro
2008-02-13 17:52 ` 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure Mel Gorman
2008-02-13 18:45 ` Mike Travis
2008-02-14 20:17 ` Mel Gorman
2008-02-14 20:41 ` Mike Travis
2008-02-15 2:02 ` Mel Gorman
2008-02-15 15:46 ` Mike Travis
2008-02-16 20:34 ` Mike Travis
2008-02-17 0:23 ` Mike Travis
2008-02-19 16:12 ` Mike Travis
2008-02-19 19:23 ` Mel Gorman
2008-02-19 19:29 ` Mike Travis
2008-02-27 6:29 ` Yinghai Lu
2008-02-27 14:37 ` Mike Travis
2008-02-27 17:25 ` Yinghai Lu
2008-02-28 15:42 ` Mel Gorman
2008-02-28 17:45 ` Yinghai Lu
2008-03-03 16:27 ` Mel Gorman
2008-03-03 17:45 ` Ingo Molnar
2008-03-03 18:56 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080204162223.GA6888@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=apw@shadowen.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.