From: Aurelien Jarno <aurelien@aurel32.net>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Subject: [PATCH] [MIPS] Add platform MTD support for the WGT634U machine
Date: Thu, 7 Feb 2008 03:17:16 +0100 [thread overview]
Message-ID: <20080207021716.GA3350@volta.aurel32.net> (raw)
The patch below adds MTD support for the WGT634U machine by defining a
new platform_device for the flash.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
arch/mips/bcm47xx/wgt634u.c | 69 +++++++++++++++++++++++++++++++++++++++++--
1 files changed, 66 insertions(+), 3 deletions(-)
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index 5a017ea..997e540 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -9,6 +9,7 @@
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
@@ -43,6 +44,61 @@ static struct platform_device wgt634u_gpio_leds = {
}
};
+
+/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+ firmware. */
+static struct mtd_partition wgt634u_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0,
+ .size = 0x60000, /* 384k */
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "config",
+ .offset = 0x60000,
+ .size = 0x20000 /* 128k */
+ },
+ {
+ .name = "linux",
+ .offset = 0x80000,
+ .size = 0x140000 /* 1280k */
+ },
+ {
+ .name = "jffs",
+ .offset = 0x1c0000,
+ .size = 0x620000 /* 6272k */
+ },
+ {
+ .name = "nvram",
+ .offset = 0x7e0000,
+ .size = 0x20000 /* 128k */
+ },
+};
+
+static struct physmap_flash_data wgt634u_flash_data = {
+ .parts = wgt634u_partitions,
+ .nr_parts = ARRAY_SIZE(wgt634u_partitions)
+};
+
+static struct resource wgt634u_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device wgt634u_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &wgt634u_flash_data, },
+ .resource = &wgt634u_flash_resource,
+ .num_resources = 1,
+};
+
+/* Platform devices */
+static struct platform_device *wgt634u_devices[] __initdata = {
+ &wgt634u_flash,
+ &wgt634u_gpio_leds,
+};
+
static int __init wgt634u_init(void)
{
/* There is no easy way to detect that we are running on a WGT634U
@@ -54,9 +110,16 @@ static int __init wgt634u_init(void)
if (et0mac[0] == 0x00 &&
((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5)))
- return platform_device_register(&wgt634u_gpio_leds);
- else
+ (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+ wgt634u_flash_data.width = mcore->flash_buswidth;
+ wgt634u_flash_resource.start = mcore->flash_window;
+ wgt634u_flash_resource.end = mcore->flash_window
+ + mcore->flash_window_size
+ - 1;
+ return platform_add_devices(wgt634u_devices,
+ ARRAY_SIZE(wgt634u_devices));
+ } else
return -ENODEV;
}
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
next reply other threads:[~2008-02-07 2:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-07 2:17 Aurelien Jarno [this message]
2008-02-19 16:56 ` [PATCH] [MIPS] Add platform MTD support for the WGT634U machine Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080207021716.GA3350@volta.aurel32.net \
--to=aurelien@aurel32.net \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.