From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: trapped io support for highlander V2
Date: Thu, 07 Feb 2008 11:23:53 +0000 [thread overview]
Message-ID: <20080207112353.9748.54200.sendpatchset@clockwork.opensource.se> (raw)
In-Reply-To: <20080206152342.27118.35156.sendpatchset@clockwork.opensource.se>
This patch converts the highlander CF device from good old machvec readb/writeb
to the new shiny trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/Kconfig | 1
arch/sh/boards/renesas/r7780rp/setup.c | 47 ++++++++++----------------------
include/asm-sh/r7780rp.h | 3 --
3 files changed, 17 insertions(+), 34 deletions(-)
--- 0007/arch/sh/Kconfig
+++ work/arch/sh/Kconfig 2008-02-07 19:18:21.000000000 +0900
@@ -472,6 +472,7 @@ config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
config SH_MIGOR
bool "Migo-R"
--- 0001/arch/sh/boards/renesas/r7780rp/setup.c
+++ work/arch/sh/boards/renesas/r7780rp/setup.c 2008-02-07 19:20:09.000000000 +0900
@@ -23,6 +23,7 @@
#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
+#include <asm/io_trapped.h>
static struct resource r8a66597_usb_host_resources[] = {
[0] = {
@@ -181,13 +182,27 @@ static struct platform_device *r7780rp_d
&m66592_usb_peripheral_device,
&heartbeat_device,
#ifndef CONFIG_SH_R7780RP
- &cf_ide_device,
&ax88796_device,
#endif
};
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+ .resource = cf_ide_resources,
+ .num_resources = 2,
+ .minimum_bus_width = 16,
+};
+
static int __init r7780rp_devices_setup(void)
{
+#ifndef CONFIG_SH_R7780RP
+ if (register_trapped_io(&cf_trapped_io) = 0)
+ platform_device_register(&cf_ide_device);
+#endif
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
@@ -226,34 +241,6 @@ static void r7780rp_power_off(void)
ctrl_outw(0x0001, PA_POFF);
}
-static inline unsigned char is_ide_ioaddr(unsigned long addr)
-{
- return ((cf_ide_resources[0].start <= addr &&
- addr <= cf_ide_resources[0].end) ||
- (cf_ide_resources[1].start <= addr &&
- addr <= cf_ide_resources[1].end));
-}
-
-void highlander_writeb(u8 b, void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- ctrl_outw((u16)b, tmp);
- else
- ctrl_outb(b, tmp);
-}
-
-u8 highlander_readb(void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- return ctrl_inw(tmp) & 0xff;
- else
- return ctrl_inb(tmp);
-}
-
/*
* Initialize the board
*/
@@ -338,6 +325,4 @@ static struct sh_machine_vector mv_highl
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
- .mv_readb = highlander_readb,
- .mv_writeb = highlander_writeb,
};
--- 0001/include/asm-sh/r7780rp.h
+++ work/include/asm-sh/r7780rp.h 2008-02-07 19:18:21.000000000 +0900
@@ -195,7 +195,4 @@ unsigned char *highlander_init_irq_r7780
unsigned char *highlander_init_irq_r7780rp(void);
unsigned char *highlander_init_irq_r7785rp(void);
-#define __IO_PREFIX r7780rp
-#include <asm/io_generic.h>
-
#endif /* __ASM_SH_RENESAS_R7780RP */
prev parent reply other threads:[~2008-02-07 11:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-06 15:23 [PATCH] sh: trapped io support for highlander Magnus Damm
2008-02-07 11:23 ` Magnus Damm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080207112353.9748.54200.sendpatchset@clockwork.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.