Re: 3ware I/O error

Re: 3ware I/O error

[Randy McAnally]

Did you try updating your 3ware firmware?  This solved issues with some of 
my 9550sx cards which only had issues with the Xen kernel.

Odd Xen Kernel module interaction

[Alvin Starr]

I have a network kernel module that I am trying to debug.

It is trying to query the file information for a socket that a userland 
progrm has opened.
So it is accessing current->files and getting back 0x0(null).

This seems to work on a non xen kernel.

It has been quite a while since I have done any kernel hacking so I 
would not be supprised if I am missing something obvious.

I believe the module is compiling correctly. It loads correctly and at 
least some of the information pointed to by current-> is correct.

The calling application has got a bunch of file handles open so there 
should be something in current->files.

Any help,pointers or even "you idiot look here" would be greatly 
appreciated.




-- 
Alvin Starr                   ||   voice: (416)585-9971
Interlink Connectivity        ||   fax:   (416)585-9974
alvin@iplink.net              ||

Re: 3ware I/O error

[Yves-Gaël Chény]

de rsm@fast-serv.com

Did you try updating your 3ware firmware?  This solved issues with some of 
my 9550sx cards which only had issues with the Xen kernel.

-----------------

Ok, i'll trie as soon as possible, many thanks.

regards
Yves

3ware I/O error

[Yves-Gaël Chény]

Hi,
i have had a lot of I/O error (the kernel switch the block device in 
readonly mode), with a RAID 1 on a 3ware 8006-2LP using the 3wxxx for 
8xxx ATA RAID module.
After a lot of test (iozone and over), I have no problem at all with a 
standard 2.6.18 non xen, and with a 2.6.18 xen 3.1 (and with newer linux 
kernel like a 2.6.23 non-xen).

Is-there any change in the 3.2 who can cause this error ?

Regards
Yves


-- 
Yves-Gaël Chény
40 rue du Perray
44 000 Nantes
Tel : 06 73 93 06 11
      09 51 15 57 81
yves@antredugeek.fr
www.antredugeek.fr

       (o_
(o_    //\
(/)_   V_/_