From: Kalle Valo <kalle.valo@iki.fi>
To: linux-wireless@vger.kernel.org
Cc: Pavel Roskin <proski@gnu.org>
Subject: [PATCH 09/12] Use wiphy_name everywhere where needed
Date: Sun, 10 Feb 2008 17:00:56 +0200 [thread overview]
Message-ID: <20080210150056.17592.63047.stgit@tikku> (raw)
In-Reply-To: <20080210145733.17592.61729.stgit@tikku>
This is for the preparation to remove struct net_device.
Functions used by the legacy stack were not converted, because they will
removed anyway.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
---
drivers/net/wireless/at76_usb.c | 110 ++++++++++++++++++++-------------------
1 files changed, 57 insertions(+), 53 deletions(-)
diff --git a/drivers/net/wireless/at76_usb.c b/drivers/net/wireless/at76_usb.c
index 017c36c..8391443 100644
--- a/drivers/net/wireless/at76_usb.c
+++ b/drivers/net/wireless/at76_usb.c
@@ -738,7 +738,7 @@ exit:
kfree(hwcfg);
if (ret < 0)
printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -870,13 +870,13 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd)
status = at76_get_cmd_status(priv->udev, cmd);
if (status < 0) {
printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
- priv->netdev->name, status);
+ wiphy_name(priv->hw->wiphy), status);
break;
}
at76_dbg(DBG_WAIT_COMPLETE,
"%s: Waiting on cmd %d, status = %d (%s)",
- priv->netdev->name, cmd, status,
+ wiphy_name(priv->hw->wiphy), cmd, status,
at76_get_cmd_status_string(status));
if (status != CMD_STATUS_IN_PROGRESS
@@ -887,7 +887,7 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd)
if (time_after(jiffies, timeout)) {
printk(KERN_ERR
"%s: completion timeout for command %d\n",
- priv->netdev->name, cmd);
+ wiphy_name(priv->hw->wiphy), cmd);
status = -ETIMEDOUT;
break;
}
@@ -910,7 +910,7 @@ static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
if (ret != CMD_STATUS_COMPLETE) {
printk(KERN_INFO
"%s: set_mib: at76_wait_completion failed "
- "with %d\n", priv->netdev->name, ret);
+ "with %d\n", wiphy_name(priv->hw->wiphy), ret);
ret = -EIO;
}
@@ -931,7 +931,7 @@ static int at76_set_radio(struct at76_priv *priv, int enable)
ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
if (ret < 0)
printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
- priv->netdev->name, cmd, ret);
+ wiphy_name(priv->hw->wiphy), cmd, ret);
else
ret = 1;
@@ -952,7 +952,7 @@ static int at76_set_pm_mode(struct at76_priv *priv)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -970,7 +970,7 @@ static int at76_set_associd(struct at76_priv *priv, u16 id)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (associd) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -989,7 +989,7 @@ static int at76_set_listen_interval(struct at76_priv *priv, u16 interval)
if (ret < 0)
printk(KERN_ERR
"%s: set_mib (listen_interval) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1006,7 +1006,7 @@ static int at76_set_preamble(struct at76_priv *priv, u8 type)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1023,7 +1023,7 @@ static int at76_set_frag(struct at76_priv *priv, u16 size)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1040,7 +1040,7 @@ static int at76_set_rts(struct at76_priv *priv, u16 size)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1057,7 +1057,7 @@ static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1074,7 +1074,7 @@ static int at76_add_mac_address(struct at76_priv *priv, void *addr)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -1093,16 +1093,16 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv)
sizeof(struct mib_mac_addr));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x",
- priv->netdev->name,
+ wiphy_name(priv->hw->wiphy),
mac2str(m->mac_addr), m->res[0], m->res[1]);
for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, "
- "status %d", priv->netdev->name, i,
+ "status %d", wiphy_name(priv->hw->wiphy), i,
mac2str(m->group_addr[i]), m->group_addr_status[i]);
exit:
kfree(m);
@@ -1122,13 +1122,13 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv)
sizeof(struct mib_mac_wep));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
"key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
- "encr_level %u key %d", priv->netdev->name,
+ "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
m->privacy_invoked, m->wep_default_key_id,
m->wep_key_mapping_len, m->exclude_unencrypted,
le32_to_cpu(m->wep_icv_error_count),
@@ -1140,7 +1140,7 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv)
for (i = 0; i < WEP_KEYS; i++)
at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s",
- priv->netdev->name, i,
+ wiphy_name(priv->hw->wiphy), i,
hex2str(m->wep_default_keyvalue[i], key_len));
exit:
kfree(m);
@@ -1159,7 +1159,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
sizeof(struct mib_mac_mgmt));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
@@ -1170,7 +1170,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
"pm_mode %d ibss_change %d res %d "
"multi_domain_capability_implemented %d "
"international_roaming %d country_string %.3s",
- priv->netdev->name, le16_to_cpu(m->beacon_period),
+ wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
le16_to_cpu(m->CFP_max_duration),
le16_to_cpu(m->medium_occupancy_limit),
le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
@@ -1195,7 +1195,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv)
ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
@@ -1205,7 +1205,8 @@ static void at76_dump_mib_mac(struct at76_priv *priv)
"scan_type %d scan_channel %d probe_delay %u "
"min_channel_time %d max_channel_time %d listen_int %d "
"desired_ssid %s desired_bssid %s desired_bsstype %d",
- priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime),
+ wiphy_name(priv->hw->wiphy),
+ le32_to_cpu(m->max_tx_msdu_lifetime),
le32_to_cpu(m->max_rx_lifetime),
le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
@@ -1231,7 +1232,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv)
ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
@@ -1240,7 +1241,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv)
"mpdu_max_length %d cca_mode_supported %d operation_rate_set "
"0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
"phy_type %d current_reg_domain %d",
- priv->netdev->name, le32_to_cpu(m->ed_threshold),
+ wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
le16_to_cpu(m->preamble_length),
le16_to_cpu(m->plcp_header_length),
@@ -1264,13 +1265,14 @@ static void at76_dump_mib_local(struct at76_priv *priv)
ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
"txautorate_fallback %d ssid_size %d promiscuous_mode %d "
- "preamble_type %d", priv->netdev->name, m->beacon_enable,
+ "preamble_type %d", wiphy_name(priv->hw->wiphy),
+ m->beacon_enable,
m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
m->preamble_type);
exit:
@@ -1289,16 +1291,16 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv)
sizeof(struct mib_mdomain));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto exit;
}
at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s",
- priv->netdev->name,
+ wiphy_name(priv->hw->wiphy),
hex2str(m->channel_list, sizeof(m->channel_list)));
at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s",
- priv->netdev->name,
+ wiphy_name(priv->hw->wiphy),
hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel)));
exit:
kfree(m);
@@ -1319,11 +1321,11 @@ static int at76_get_current_bssid(struct at76_priv *priv)
sizeof(struct mib_mac_mgmt));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto error;
}
memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN);
- printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name,
+ printk(KERN_INFO "%s: using BSSID %s\n", wiphy_name(priv->hw->wiphy),
mac2str(priv->bssid));
error:
kfree(mac_mgmt);
@@ -1343,7 +1345,7 @@ static int at76_get_current_channel(struct at76_priv *priv)
ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy));
if (ret < 0) {
printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto error;
}
priv->channel = phy->channel_id;
@@ -3292,7 +3294,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv)
if (!priv->rx_urb) {
printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
- priv->netdev->name, __func__);
+ wiphy_name(priv->hw->wiphy), __func__);
return -EFAULT;
}
@@ -3300,7 +3302,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv)
skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
if (!skb) {
printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
- priv->netdev->name);
+ wiphy_name(priv->hw->wiphy));
ret = -ENOMEM;
goto exit;
}
@@ -3320,14 +3322,14 @@ static int at76_submit_rx_urb(struct at76_priv *priv)
"usb_submit_urb returned -ENODEV");
else
printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
}
exit:
if (ret < 0 && ret != -ENODEV)
printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
"driver and/or power cycle the device\n",
- priv->netdev->name);
+ wiphy_name(priv->hw->wiphy));
return ret;
}
@@ -3927,14 +3929,14 @@ static int at76_startup_device(struct at76_priv *priv)
at76_dbg(DBG_PARAMS,
"%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d "
- "keylen %d", priv->netdev->name, priv->essid_size, priv->essid,
- hex2str(priv->essid, IW_ESSID_MAX_SIZE),
+ "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
+ priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE),
priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
priv->channel, priv->wep_enabled ? "enabled" : "disabled",
priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
at76_dbg(DBG_PARAMS,
"%s param: preamble %s rts %d retry %d frag %d "
- "txrate %s auth_mode %d", priv->netdev->name,
+ "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
preambles[priv->preamble_type], priv->rts_threshold,
priv->short_retry_limit, priv->frag_threshold,
priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
@@ -3945,7 +3947,7 @@ static int at76_startup_device(struct at76_priv *priv)
at76_dbg(DBG_PARAMS,
"%s param: pm_mode %d pm_period %d auth_mode %s "
"scan_times %d %d scan_mode %s",
- priv->netdev->name, priv->pm_mode, priv->pm_period,
+ wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
priv->scan_min_time, priv->scan_max_time,
priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
@@ -3989,7 +3991,7 @@ static int at76_startup_device(struct at76_priv *priv)
sizeof(struct at76_card_config));
if (ret < 0) {
printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
return ret;
}
@@ -4115,7 +4117,7 @@ static void at76_work_set_promisc(struct work_struct *work)
ret = at76_set_mib(priv, &priv->mib_buf);
if (ret < 0)
printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
mutex_unlock(&priv->mtx);
}
@@ -5037,14 +5039,16 @@ static void at76_rx_tasklet(unsigned long param)
if (urb->status != -ENOENT && urb->status != -ECONNRESET)
at76_dbg(DBG_URB,
"%s %s: - nonzero Rx bulk status received: %d",
- __func__, netdev->name, urb->status);
+ __func__, wiphy_name(priv->hw->wiphy),
+ urb->status);
return;
}
at76_dbg(DBG_RX_ATMEL_HDR,
"%s: rx frame: rate %d rssi %d noise %d link %d %s",
- priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level,
- buf->link_quality, hex2str(i802_11_hdr, 48));
+ wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
+ buf->noise_level, buf->link_quality,
+ hex2str(i802_11_hdr, 48));
{
struct ieee80211_rx_status rx_status = {0};
@@ -5229,7 +5233,7 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
if (priv->tx_urb->status == -EINPROGRESS) {
printk(KERN_ERR "%s: %s called while tx urb is pending\n",
- priv->netdev->name, __func__);
+ wiphy_name(priv->hw->wiphy), __func__);
return NETDEV_TX_BUSY;
}
@@ -5253,7 +5257,7 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
memcpy(tx_buffer->packet, skb->data, skb->len);
at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
- priv->netdev->name, le16_to_cpu(tx_buffer->wlength),
+ wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
tx_buffer->padding, tx_buffer->tx_rate);
/* send stuff */
@@ -5264,11 +5268,11 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
if (ret) {
printk(KERN_ERR "%s: error in tx submit urb: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
if (ret == -EINVAL)
printk(KERN_ERR
"%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
- priv->netdev->name, priv->tx_urb,
+ wiphy_name(priv->hw->wiphy), priv->tx_urb,
priv->tx_urb->hcpriv, priv->tx_urb->complete);
}
@@ -5288,7 +5292,7 @@ static int at76_mac80211_start(struct ieee80211_hw *hw)
ret = at76_submit_rx_urb(priv);
if (ret < 0) {
printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
- priv->netdev->name, ret);
+ wiphy_name(priv->hw->wiphy), ret);
goto error;
}
@@ -6077,7 +6081,7 @@ static void at76_disconnect(struct usb_interface *interface)
if (!priv)
return;
- printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name);
+ printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy));
at76_delete_device(priv);
dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
}
next prev parent reply other threads:[~2008-02-10 15:10 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-10 14:59 [PATCH 00/12] at76_usb mac80211 port Kalle Valo
2008-02-10 14:59 ` [PATCH 01/12] Use net/mac80211.h instead of net/ieee80211.h Kalle Valo
2008-02-10 15:00 ` [PATCH 02/12] Add at76_dbg_dump() macro Kalle Valo
2008-02-10 15:00 ` [PATCH 03/12] Convert DBG_TX levels to use at76_dbg_dump() Kalle Valo
2008-02-10 15:00 ` [PATCH 04/12] Add DBG_CMD for debugging firmware commands Kalle Valo
2008-02-10 15:00 ` [PATCH 05/12] at76_usb: add mac80211 support Kalle Valo
2008-02-10 15:00 ` [PATCH 06/12] Add support for monitor mode Kalle Valo
2008-02-10 15:49 ` Michael Buesch
2008-02-10 15:52 ` Michael Buesch
2008-03-09 16:10 ` Kalle Valo
2008-03-09 17:39 ` Michael Buesch
2008-02-10 15:00 ` [PATCH 07/12] Add support for WEP Kalle Valo
2008-02-10 15:00 ` [PATCH 08/12] Remove support the legacy stack Kalle Valo
2008-02-10 15:00 ` Kalle Valo [this message]
2008-02-10 15:01 ` [PATCH 10/12] Allocate struct at76_priv using ieee80211_alloc_hw() Kalle Valo
2008-02-10 15:01 ` [PATCH 11/12] Prepare for struct net_device removal Kalle Valo
2008-02-10 15:01 ` [PATCH 12/12] Remove struct net_device Kalle Valo
2008-02-11 5:05 ` [PATCH 00/12] at76_usb mac80211 port Pavel Roskin
2008-02-11 5:17 ` Pavel Roskin
2008-03-09 16:43 ` Kalle Valo
2008-03-10 1:00 ` Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080210150056.17592.63047.stgit@tikku \
--to=kalle.valo@iki.fi \
--cc=linux-wireless@vger.kernel.org \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.