From: Auke Kok <auke-jan.h.kok@intel.com>
To: jeff@garzik.org
Cc: e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org
Subject: [PATCH 1/2] igb: PCIe devices do not need to unset MANC_ARP_ENA
Date: Thu, 14 Feb 2008 10:17:12 -0800 [thread overview]
Message-ID: <20080214181712.11070.48342.stgit@localhost.localdomain> (raw)
From: David Graham <david.graham@intel.com>
Users reported that ARP's were lost with igb. The problem
is fixed by not enabling this manageability configuration
bit.
None of the release_manageability code is actually needed as the
normal device reset during a shutdown returns everthing to
the right condition automatically.
Signed-off-by: David Graham <david.graham@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
---
drivers/net/igb/igb_main.c | 28 ----------------------------
1 files changed, 0 insertions(+), 28 deletions(-)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d4eb8e2..bff280e 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -606,9 +606,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
u32 manc2h = rd32(E1000_MANC2H);
u32 manc = rd32(E1000_MANC);
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
/* enable receiving management packets to the host */
/* this will probably generate destination unreachable messages
* from the host OS, but the packets will be handled on SMBUS */
@@ -623,25 +620,6 @@ static void igb_init_manageability(struct igb_adapter *adapter)
}
}
-static void igb_release_manageability(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = rd32(E1000_MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
-
- /* XXX stop the hardware watchdog ? */
- wr32(E1000_MANC, manc);
- }
-}
-
/**
* igb_configure - configure the hardware for RX and TX
* @adapter: private board structure
@@ -844,7 +822,6 @@ void igb_reset(struct igb_adapter *adapter)
igb_reset_adaptive(&adapter->hw);
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
- igb_release_manageability(adapter);
}
/**
@@ -1178,9 +1155,6 @@ static void __devexit igb_remove(struct pci_dev *pdev)
flush_scheduled_work();
-
- igb_release_manageability(adapter);
-
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
igb_release_hw_control(adapter);
@@ -3955,8 +3929,6 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- igb_release_manageability(adapter);
-
/* make sure adapter isn't asleep if manageability is enabled */
if (adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next reply other threads:[~2008-02-14 18:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-14 18:17 Auke Kok [this message]
2008-02-14 18:17 ` [PATCH 2/2] e1000e: PCIe devices do not need to unset MANC_ARP_ENA Auke Kok
2008-02-15 15:53 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080214181712.11070.48342.stgit@localhost.localdomain \
--to=auke-jan.h.kok@intel.com \
--cc=e1000-devel@lists.sourceforge.net \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.