All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Vitaly Bordug <vitb@kernel.crashing.org>
Subject: [PATCH 1/2] ide-mpc8xx: make m8xx_ide_init_ports() return an error value
Date: Wed, 20 Feb 2008 01:48:26 +0100	[thread overview]
Message-ID: <200802200148.26395.bzolnier@gmail.com> (raw)

* Make m8xx_ide_init_ports() return an error value.

* Update mpc8xx_ide_probe() to setup/probe only ports for which
  m8xx_ide_init_ports() succedded.

Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/mpc8xx.c |   40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

Index: b/drivers/ide/ppc/mpc8xx.c
===================================================================
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -127,7 +127,7 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL
  * MPC8xx's internal PCMCIA interface
  */
 #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
-static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
+static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
 {
 	unsigned long *p = hw->io_ports;
 	int i;
@@ -236,7 +236,7 @@ static void __init m8xx_ide_init_ports(h
 	if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) {
 		printk ("No card in slot %c: PIPR=%08x\n",
 			'A' + _slot_, (u32) pcmp->pcmc_pipr);
-		return;		/* No card in slot */
+		return -ENODEV;		/* No card in slot */
 	}
 
 	check_ide_device (pcmcia_base);
@@ -279,9 +279,6 @@ static void __init m8xx_ide_init_ports(h
 	}
 #endif	/* CONFIG_IDE_8xx_PCCARD */
 
-	ide_hwifs[data_port].pio_mask = ATA_PIO4;
-	ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
-
 	/* Enable Harddisk Interrupt,
 	 * and make it edge sensitive
 	 */
@@ -296,6 +293,8 @@ static void __init m8xx_ide_init_ports(h
 	/* Enable falling edge irq */
 	pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
 #endif	/* CONFIG_IDE_8xx_PCCARD */
+
+	return 0;
 }
 #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
 
@@ -304,7 +303,7 @@ static void __init m8xx_ide_init_ports(h
  * MPC8xx's internal PCMCIA interface
  */
 #if defined(CONFIG_IDE_EXT_DIRECT)
-static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
+static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
 {
 	unsigned long *p = hw->io_ports;
 	int i;
@@ -357,15 +356,14 @@ static void __init m8xx_ide_init_ports(h
 	hw->irq = ioport_dsc[data_port].irq;
 	hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
 
-	ide_hwifs[data_port].pio_mask = ATA_PIO4;
-	ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
-
 	/* Enable Harddisk Interrupt,
 	 * and make it edge sensitive
 	 */
 	/* (11-18) Set edge detect for irq, no wakeup from low power mode */
 	((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
 			(0x80000000 >> ioport_dsc[data_port].irq);
+
+	return 0;
 }
 #endif	/* CONFIG_IDE_8xx_DIRECT */
 
@@ -794,14 +792,26 @@ static int __init mpc8xx_ide_probe(void)
 
 #ifdef IDE0_BASE_OFFSET
 	memset(&hw, 0, sizeof(hw));
-	m8xx_ide_init_ports(&hw, 0);
-	ide_init_port_hw(&ide_hwifs[0], &hw);
-	idx[0] = 0;
+	if (!m8xx_ide_init_ports(&hw, 0)) {
+		ide_hwif_t *hwif = &ide_hwifs[0];
+
+		ide_init_port_hw(hwif, &hw);
+		hwif->pio_mask = ATA_PIO4;
+		hwif->set_pio_mode = m8xx_ide_set_pio_mode;
+
+		idx[0] = 0;
+	}
 #ifdef IDE1_BASE_OFFSET
 	memset(&hw, 0, sizeof(hw));
-	m8xx_ide_init_ports(&hw, 1);
-	ide_init_port_hw(&ide_hwifs[1], &hw);
-	idx[1] = 1;
+	if (!m8xx_ide_init_ports(&hw, 1)) {
+		ide_hwif_t *mate = &ide_hwifs[1];
+
+		ide_init_port_hw(mate, &hw);
+		mate->pio_mask = ATA_PIO4;
+		mate->set_pio_mode = m8xx_ide_set_pio_mode;
+
+		idx[1] = 1;
+	}
 #endif
 #endif
 

                 reply	other threads:[~2008-02-20  0:36 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200802200148.26395.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vitb@kernel.crashing.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.