From: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
To: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: Ned Forrester <nforrester-/d+BM93fTQY@public.gmane.org>,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
Stephen Street
<stephen-nl6u4wocdmy51APUEpUfAkEOCMrvLtNR@public.gmane.org>
Subject: [patch 2.6.25-rc2] spi: pxa2xx_spi "sparse" fixes
Date: Wed, 20 Feb 2008 17:29:24 -0800 [thread overview]
Message-ID: <200802201729.24641.david-b@pacbell.net> (raw)
Various cleanups to pxa2xx_spi suggested by "sparse": make sure
that register addresess are "void __iomem *", and make a few
functions properly static.
Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
---
drivers/spi/pxa2xx_spi.c | 52 +++++++++++++++++++++++++----------------------
1 file changed, 28 insertions(+), 24 deletions(-)
--- a/drivers/spi/pxa2xx_spi.c 2008-02-20 17:17:16.000000000 -0800
+++ b/drivers/spi/pxa2xx_spi.c 2008-02-20 17:19:06.000000000 -0800
@@ -66,8 +66,11 @@ MODULE_LICENSE("GPL");
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
#define DEFINE_SSP_REG(reg, off) \
-static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
-static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+static inline u32 read_##reg(void const __iomem *p) \
+{ return __raw_readl(p + (off)); } \
+\
+static inline void write_##reg(u32 v, void __iomem *p) \
+{ __raw_writel(v, p + (off)); }
DEFINE_SSP_REG(SSCR0, 0x00)
DEFINE_SSP_REG(SSCR1, 0x04)
@@ -105,7 +108,7 @@ struct driver_data {
u32 *null_dma_buf;
/* SSP register addresses */
- void *ioaddr;
+ void __iomem *ioaddr;
u32 ssdr_physical;
/* SSP masks*/
@@ -172,7 +175,7 @@ static int flush(struct driver_data *drv
{
unsigned long limit = loops_per_jiffy << 1;
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
do {
while (read_SSSR(reg) & SSSR_RNE) {
@@ -190,7 +193,7 @@ static void null_cs_control(u32 command)
static int null_writer(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
u8 n_bytes = drv_data->n_bytes;
if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
@@ -205,7 +208,7 @@ static int null_writer(struct driver_dat
static int null_reader(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
u8 n_bytes = drv_data->n_bytes;
while ((read_SSSR(reg) & SSSR_RNE)
@@ -219,7 +222,7 @@ static int null_reader(struct driver_dat
static int u8_writer(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
|| (drv_data->tx == drv_data->tx_end))
@@ -233,7 +236,7 @@ static int u8_writer(struct driver_data
static int u8_reader(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
&& (drv_data->rx < drv_data->rx_end)) {
@@ -246,7 +249,7 @@ static int u8_reader(struct driver_data
static int u16_writer(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
|| (drv_data->tx == drv_data->tx_end))
@@ -260,7 +263,7 @@ static int u16_writer(struct driver_data
static int u16_reader(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
&& (drv_data->rx < drv_data->rx_end)) {
@@ -273,7 +276,7 @@ static int u16_reader(struct driver_data
static int u32_writer(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
|| (drv_data->tx == drv_data->tx_end))
@@ -287,7 +290,7 @@ static int u32_writer(struct driver_data
static int u32_reader(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
&& (drv_data->rx < drv_data->rx_end)) {
@@ -411,7 +414,7 @@ static void giveback(struct driver_data
msg->complete(msg->context);
}
-static int wait_ssp_rx_stall(void *ioaddr)
+static int wait_ssp_rx_stall(void const __iomem *ioaddr)
{
unsigned long limit = loops_per_jiffy << 1;
@@ -431,9 +434,9 @@ static int wait_dma_channel_stop(int cha
return limit;
}
-void dma_error_stop(struct driver_data *drv_data, const char *msg)
+static void dma_error_stop(struct driver_data *drv_data, const char *msg)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
/* Stop and reset */
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
@@ -455,7 +458,7 @@ void dma_error_stop(struct driver_data *
static void dma_transfer_complete(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
struct spi_message *msg = drv_data->cur_msg;
/* Clear and disable interrupts on SSP and DMA channels*/
@@ -535,7 +538,7 @@ static void dma_handler(int channel, voi
static irqreturn_t dma_transfer(struct driver_data *drv_data)
{
u32 irq_status;
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
irq_status = read_SSSR(reg) & drv_data->mask_sr;
if (irq_status & SSSR_ROR) {
@@ -569,7 +572,7 @@ static irqreturn_t dma_transfer(struct d
static void int_error_stop(struct driver_data *drv_data, const char* msg)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
/* Stop and reset SSP */
write_SSSR(drv_data->clear_sr, reg);
@@ -587,7 +590,7 @@ static void int_error_stop(struct driver
static void int_transfer_complete(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
/* Stop SSP */
write_SSSR(drv_data->clear_sr, reg);
@@ -613,7 +616,7 @@ static void int_transfer_complete(struct
static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
{
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
@@ -674,7 +677,7 @@ static irqreturn_t interrupt_transfer(st
static irqreturn_t ssp_int(int irq, void *dev_id)
{
struct driver_data *drv_data = dev_id;
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
if (!drv_data->cur_msg) {
@@ -694,7 +697,8 @@ static irqreturn_t ssp_int(int irq, void
return drv_data->transfer_handler(drv_data);
}
-int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
+static int set_dma_burst_and_threshold(struct chip_data *chip,
+ struct spi_device *spi,
u8 bits_per_word, u32 *burst_code,
u32 *threshold)
{
@@ -808,7 +812,7 @@ static void pump_transfers(unsigned long
struct spi_transfer *previous = NULL;
struct chip_data *chip = NULL;
struct ssp_device *ssp = drv_data->ssp;
- void *reg = drv_data->ioaddr;
+ void __iomem *reg = drv_data->ioaddr;
u32 clk_div = 0;
u8 bits = 0;
u32 speed = 0;
@@ -1337,7 +1341,7 @@ static int __init pxa2xx_spi_probe(struc
struct device *dev = &pdev->dev;
struct pxa2xx_spi_master *platform_info;
struct spi_master *master;
- struct driver_data *drv_data = 0;
+ struct driver_data *drv_data = NULL;
struct ssp_device *ssp;
int status = 0;
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
reply other threads:[~2008-02-21 1:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802201729.24641.david-b@pacbell.net \
--to=david-b-ybekhbn/0ldr7s880joybq@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=nforrester-/d+BM93fTQY@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=stephen-nl6u4wocdmy51APUEpUfAkEOCMrvLtNR@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.