From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] sis5513: fail early for unsupported chipsets
Date: Sat, 23 Feb 2008 21:14:23 +0100 [thread overview]
Message-ID: <200802232114.23726.bzolnier@gmail.com> (raw)
* Factor out chipset family detection from init_chipset_sis5513()
to sis_find_family().
* Use sis_find_family() in sis5513_init_one() to fail early if the
chipset is unsupported.
* Keep a local copy sis5513_chipset in sis5513_init_one()
and set .udma_mask according to chipset family.
* Remove no longer need ->ultra_mask setting from init_hwif_sis5513().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/pci/sis5513.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -358,8 +358,7 @@ static u8 sis5513_ata133_udma_filter(ide
return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
}
-/* Chip detection and general config */
-static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
+static int __devinit sis_find_family(struct pci_dev *dev)
{
struct pci_dev *host;
int i = 0;
@@ -440,9 +439,12 @@ static unsigned int __devinit init_chips
}
}
- if (!chipset_family)
- return -1;
+ return chipset_family;
+}
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
+ const char *name)
+{
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
2/ tell old chips to allow per drive IDE timings */
@@ -548,8 +550,6 @@ static u8 __devinit ata66_sis5513(ide_hw
static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
{
- u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
-
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->set_dma_mode = &sis_set_dma_mode;
@@ -557,11 +557,6 @@ static void __devinit init_hwif_sis5513
hwif->udma_filter = sis5513_ata133_udma_filter;
hwif->cable_detect = ata66_sis5513;
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->ultra_mask = udma_rates[chipset_family];
}
static const struct ide_port_info sis5513_chipset __devinitdata = {
@@ -576,7 +571,15 @@ static const struct ide_port_info sis551
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &sis5513_chipset);
+ struct ide_port_info d = sis5513_chipset;
+ u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+
+ if (sis_find_family(dev) == 0)
+ return -ENOTSUPP;
+
+ d.udma_mask = udma_rates[chipset_family];
+
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id sis5513_pci_tbl[] = {
reply other threads:[~2008-02-23 20:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802232114.23726.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.