From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH 1/4] ide: remove ->noprobe field from ide_hwif_t
Date: Wed, 27 Feb 2008 23:19:47 +0100 [thread overview]
Message-ID: <200802272319.48121.bzolnier@gmail.com> (raw)
Update IDE PMAC host driver to use drive->noprobe instead of hwif->noprobe
and remove hwif->noprobe completely (it is always set to zero now).
There should be no functional changes caused by this patch.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/arm/icside.c | 1 -
drivers/ide/ide-probe.c | 3 +--
drivers/ide/ide.c | 4 ----
drivers/ide/mips/swarm.c | 1 -
drivers/ide/ppc/pmac.c | 15 ++++++++++-----
include/linux/ide.h | 1 -
6 files changed, 11 insertions(+), 14 deletions(-)
Index: b/drivers/ide/arm/icside.c
===================================================================
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -424,7 +424,6 @@ icside_setup(void __iomem *base, struct
}
hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
hwif->irq = ec->irq;
- hwif->noprobe = 0;
hwif->chipset = ide_acorn;
hwif->gendev.parent = &ec->dev;
hwif->dev = &ec->dev;
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -773,8 +773,7 @@ static int ide_probe_port(ide_hwif_t *hw
BUG_ON(hwif->present);
- if (hwif->noprobe ||
- (hwif->drives[0].noprobe && hwif->drives[1].noprobe))
+ if (hwif->drives[0].noprobe && hwif->drives[1].noprobe)
return -EACCES;
/*
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -456,7 +456,6 @@ void ide_init_port_hw(ide_hwif_t *hwif,
{
memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
hwif->irq = hw->irq;
- hwif->noprobe = 0;
hwif->chipset = hw->chipset;
hwif->gendev.parent = hw->dev;
hwif->ack_intr = hw->ack_intr;
@@ -1016,14 +1015,12 @@ static int __init ide_setup(char *s)
goto done;
case -3: /* "nowerr" */
drive->bad_wstat = BAD_R_STAT;
- hwif->noprobe = 0;
goto done;
case -4: /* "cdrom" */
drive->present = 1;
drive->media = ide_cdrom;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
- hwif->noprobe = 0;
goto done;
case -5: /* nodma */
drive->nodma = 1;
@@ -1054,7 +1051,6 @@ static int __init ide_setup(char *s)
drive->sect = drive->bios_sect = vals[2];
drive->present = 1;
drive->forced_geom = 1;
- hwif->noprobe = 0;
goto done;
default:
goto bad_option;
Index: b/drivers/ide/mips/swarm.c
===================================================================
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -113,7 +113,6 @@ static int __devinit swarm_ide_probe(str
/* Prevent resource map manipulation. */
hwif->mmio = 1;
hwif->chipset = ide_generic;
- hwif->noprobe = 0;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
hwif->io_ports[i] =
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1049,17 +1049,22 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
hwif->mmio = 1;
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->noprobe = pmif->mediabay;
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
-
+
+ if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
- if (pmif->mediabay && check_media_bay_by_base(pmif->regbase, MB_CD) == 0)
- hwif->noprobe = 0;
-#endif /* CONFIG_PMAC_MEDIABAY */
+ if (check_media_bay_by_base(pmif->regbase, MB_CD)) {
+#else
+ if (1) {
+#endif
+ hwif->drives[0].noprobe = 1;
+ hwif->drives[1].noprobe = 1;
+ }
+ }
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (pmif->cable_80 == 0)
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -516,7 +516,6 @@ typedef struct hwif_s {
unsigned long extra_base; /* extra addr for dma ports */
unsigned extra_ports; /* number of extra dma ports */
- unsigned noprobe : 1; /* don't probe for this interface */
unsigned present : 1; /* this interface exists */
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
reply other threads:[~2008-02-27 22:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802272319.48121.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.