From: Russ Anderson <rja@sgi.com>
To: linux-ia64@vger.kernel.org
Subject: Re: Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093
Date: Thu, 28 Feb 2008 00:34:02 +0000 [thread overview]
Message-ID: <20080228003402.GB28437@sgi.com> (raw)
In-Reply-To: <200802251027.15107.bjorn.helgaas@hp.com>
On Wed, Feb 27, 2008 at 05:12:26PM -0700, Alex Chiang wrote:
> * Alex Chiang <achiang@hp.com>:
> >
> > And if anyone has other suggestions too, I'm happy to hear them.
>
> Actually, this might be a relatively clean approach. As far as I
> can tell, the only purpose for sal_revision / sal_version is to
> display some boot messages. No one (other than my use below) is
> keying off them for anything.
>
> My fixup is based on the mail that Russ sent out with his
> bootlog. It contained this line:
>
> SAL 2.9: SGI SN2 version 1.30
>
> So that's what I'm keying off of below.
That may be as clean as anything.
> Thanks.
>
> /ac
>
> From: Alex Chiang <achiang@hp.com>
> Subject: [PATCH] ia64: workaround tiger ia64_sal_get_physical_id_info hang
>
> Intel Tiger platforms hang when calling SAL_GET_PHYSICAL_ID_INFO
> instead of properly returning -1 for unimplemented, so add a
> version check.
>
> SGI Altix platforms have an incorrect SAL version hard-coded into
> their prom -- they encode 2.9, but actually implement 3.2 -- so
> fix it up and allow ia64_sal_get_physical_id_info to keep
> working.
>
> Signed-off-by: Alex Chiang <achiang@hp.com>
> ---
> diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
> index f44fe84..4f3686a 100644
> --- a/arch/ia64/kernel/sal.c
> +++ b/arch/ia64/kernel/sal.c
> @@ -109,6 +109,15 @@ check_versions (struct ia64_sal_systab *systab)
> sal_revision = SAL_VERSION_CODE(2, 8);
> sal_version = SAL_VERSION_CODE(0, 0);
> }
> +
> + if (ia64_platform_is("sn2")
> + && (sal_revision = SAL_VERSION_CODE(2, 9))
> + && (sal_version = SAL_VERSION_CODE(1, 90)))
The sal_version check should be removed. The revision has been
stuck at 2.9 but the version has been changing.
> + /*
> + * SGI Altix has hard-coded version 2.9 in their prom
> + * but they actually implement 3.2, so let's fix it here.
> + */
> + sal_revision = SAL_VERSION_CODE(3, 2);
> }
>
> static void __init
> diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
> index 2251118..f4904db 100644
> --- a/include/asm-ia64/sal.h
> +++ b/include/asm-ia64/sal.h
> @@ -807,6 +807,10 @@ static inline s64
> ia64_sal_physical_id_info(u16 *splid)
> {
> struct ia64_sal_retval isrv;
> +
> + if (sal_revision < SAL_VERSION_CODE(3,2))
> + return -1;
> +
> SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
> if (splid)
> *splid = isrv.v0;
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Russ Anderson, OS RAS/Partitioning Project Lead
SGI - Silicon Graphics Inc rja@sgi.com
next prev parent reply other threads:[~2008-02-28 0:34 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 17:27 Tiger oops in ia64_sal_physical_id_info (was [RFC] regression: 113134fcbca83619be4c68d0ca66db609 Bjorn Helgaas
2008-02-25 23:08 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression: Alex Chiang
2008-02-26 1:11 ` Shaohua Li
2008-02-26 7:15 ` Alex Chiang
2008-02-26 9:24 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Li, Shaohua
2008-02-26 17:51 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-26 22:45 ` Alex Chiang
2008-02-26 23:07 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-26 23:46 ` Russ Anderson
2008-02-26 23:50 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 0:00 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-27 0:10 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 0:15 ` Shaohua Li
2008-02-27 0:23 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
2008-02-27 0:34 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-27 1:05 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
2008-02-27 14:38 ` Luck, Tony
2008-02-27 15:19 ` Russ Anderson
2008-02-27 16:50 ` Russ Anderson
2008-02-27 23:43 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 0:12 ` Alex Chiang
2008-02-28 0:30 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-28 0:31 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 0:34 ` Russ Anderson [this message]
2008-02-28 0:42 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Matthew Wilcox
2008-02-28 1:41 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] Alex Chiang
2008-02-28 3:47 ` Tiger oops in ia64_sal_physical_id_info (was [RFC] regression:113134fcbca83619be4c68d0ca66db6093 Russ Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080228003402.GB28437@sgi.com \
--to=rja@sgi.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.