All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jeremy Higdon <jeremy@sgi.com>
Subject: [PATCH 5/7] sgiioc4: use ->init_dma method
Date: Sun, 9 Mar 2008 16:31:48 +0100	[thread overview]
Message-ID: <200803091631.48968.bzolnier@gmail.com> (raw)

* Move dma_base check from sgiioc4_ide_setup_pci_device()
  to ide_dma_sgiioc4().

* Replace ide_dma_sgiioc4() 'unsigned long dma_base' argument
  by 'const struct ide_port_info *d'.

* Move hwif->INB setup from ide_init_sgiioc4() to
  sgiioc4_ide_setup_pci_device().

* Move ide_init_sgiioc4() call from sgiioc4_ide_setup_pci_device()
  to ide_dma_sgiioc4().

* Convert the driver to use ->init_dma method.

Cc: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sgiioc4.c |   29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

Index: b/drivers/ide/pci/sgiioc4.c
===================================================================
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -327,15 +327,21 @@ sgiioc4_INB(unsigned long port)
 	return reg;
 }
 
+static void __devinit ide_init_sgiioc4(ide_hwif_t *);
+
 /* Creates a dma map for the scatter-gather list entries */
 static int __devinit
-ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
+ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 	void __iomem *virt_dma_base;
 	int num_ports = sizeof (ioc4_dma_regs_t);
 	void *pad;
 
+	if (dma_base == 0)
+		return -1;
+
 	printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 	       dma_base, dma_base + num_ports - 1);
 
@@ -371,6 +377,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsig
 
 	if (pad) {
 		ide_set_hwifdata(hwif, pad);
+		ide_init_sgiioc4(hwif);
 		return 0;
 	}
 
@@ -551,11 +558,6 @@ static int sgiioc4_ide_dma_setup(ide_dri
 static void __devinit
 ide_init_sgiioc4(ide_hwif_t * hwif)
 {
-	hwif->INB = &sgiioc4_INB;
-
-	if (hwif->dma_base == 0)
-		return;
-
 	hwif->dma_host_set = &sgiioc4_dma_host_set;
 	hwif->dma_setup = &sgiioc4_ide_dma_setup;
 	hwif->dma_start = &sgiioc4_ide_dma_start;
@@ -575,16 +577,16 @@ static const struct ide_port_ops sgiioc4
 
 static const struct ide_port_info sgiioc4_port_info __devinitdata = {
 	.chipset		= ide_pci,
+	.init_dma		= ide_dma_sgiioc4,
 	.port_ops		= &sgiioc4_port_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
-				  IDE_HFLAG_NO_AUTOTUNE,
+	.host_flags		= IDE_HFLAG_NO_AUTOTUNE,
 	.mwdma_mask		= ATA_MWDMA2_ONLY,
 };
 
 static int __devinit
 sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 {
-	unsigned long cmd_base, dma_base, irqport;
+	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
 	ide_hwif_t *hwif;
@@ -610,7 +612,6 @@ sgiioc4_ide_setup_pci_device(struct pci_
 	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
 	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
 	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
-	dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 
 	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
@@ -639,13 +640,7 @@ sgiioc4_ide_setup_pci_device(struct pci_
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) {
-		printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
-				 hwif->name, DRV_NAME);
-		d.mwdma_mask = 0;
-	}
-
-	ide_init_sgiioc4(hwif);
+	hwif->INB = &sgiioc4_INB;
 
 	idx[0] = hwif->index;
 

             reply	other threads:[~2008-03-09 15:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-09 15:31 Bartlomiej Zolnierkiewicz [this message]
2008-09-09 19:32 ` [PATCH 5/7] sgiioc4: use ->init_dma method Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200803091631.48968.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=jeremy@sgi.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.