From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@redhat.com>
Cc: "linux-wireless" <linux-wireless@vger.kernel.org>,
rt2400-devel@lists.sourceforge.net
Subject: [PATCH 19/24] rt2x00: Always enable TSF ticking
Date: Sun, 9 Mar 2008 22:47:43 +0100 [thread overview]
Message-ID: <200803092247.43406.IvDoorn@gmail.com> (raw)
In-Reply-To: <200803092237.43451.IvDoorn@gmail.com>
Whatever mode we are in, according to the legacy drivers
we should always enable TSF ticking/counting.
We should also always enable the TBCN/TBTT field,
this field is only disabled during beacon regeneration.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 2 ++
drivers/net/wireless/rt2x00/rt2500pci.c | 2 ++
drivers/net/wireless/rt2x00/rt2500usb.c | 2 ++
drivers/net/wireless/rt2x00/rt61pci.c | 2 ++
drivers/net/wireless/rt2x00/rt73usb.c | 2 ++
5 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 70f711e..e2bb634 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -291,7 +291,9 @@ static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index a46206c..4e312cb 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -294,7 +294,9 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
+ rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(®, CSR14_TBCN, 1);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 43da93a..8dfebfd 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -343,7 +343,9 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, conf->sync);
+ rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 62eff52..d11d3e5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -343,7 +343,9 @@ static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index e0dd3ad..03a72ce 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -355,7 +355,9 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
* Enable synchronisation.
*/
rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®);
+ rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
}
--
1.5.4.3
next prev parent reply other threads:[~2008-03-09 21:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-09 21:37 Please pull 'upstream' branch of rt2x00 Ivo van Doorn
2008-03-09 21:38 ` [PATCH 01/24] rt2x00: Align RX descriptor to 4 bytes Ivo van Doorn
2008-03-09 21:38 ` [PATCH 02/24] rt2x00: Initialize TX control field in data entries Ivo van Doorn
2008-03-09 21:39 ` [PATCH 03/24] rt2x00: Use the correct size when copying the control info in txdone Ivo van Doorn
2008-03-09 21:40 ` [PATCH 04/24] rt2x00: Don't use uninitialized desc_len Ivo van Doorn
2008-03-09 21:40 ` [PATCH 05/24] rt2x00: never disable multicast because it disables broadcast too Ivo van Doorn
2008-03-09 21:41 ` [PATCH 06/24] rt2x00: Don't use unitialized rxdesc->size Ivo van Doorn
2008-03-09 21:41 ` [PATCH 07/24] rt2x00: Use skbdesc fields for descriptor initialization Ivo van Doorn
2008-03-09 21:42 ` [PATCH 08/24] rt2x00: Add new D-Link USB ID Ivo van Doorn
2008-03-09 21:42 ` [PATCH 09/24] rt2x00: Only disable beaconing just before beacon update Ivo van Doorn
2008-03-09 21:43 ` [PATCH 10/24] rt2x00:correct rx packet length for USB devices Ivo van Doorn
2008-03-09 21:43 ` [PATCH 11/24] rt2x00: Fix trivial log message Ivo van Doorn
2008-03-09 21:44 ` [PATCH 12/24] rt2x00: Upgrade queue->lock to use irqsave Ivo van Doorn
2008-03-09 21:44 ` [PATCH 13/24] rt2x00: Move firmware checksumming to driver Ivo van Doorn
2008-03-09 21:45 ` [PATCH 14/24] rt2x00: Start bugging when rt2x00lib doesn't filter SW diversity Ivo van Doorn
2008-03-09 21:45 ` [PATCH 15/24] rt2x00: Check IEEE80211_TXCTL_SEND_AFTER_DTIM flag Ivo van Doorn
2008-03-09 21:46 ` [PATCH 16/24] rt2x00: Rename config_preamble() to config_erp() Ivo van Doorn
2008-03-09 21:46 ` [PATCH 17/24] rt2x00: Add suspend/resume handlers to rt2x00rfkill Ivo van Doorn
2008-03-09 21:47 ` [PATCH 18/24] rt2x00: Make rt2x00leds_register return void Ivo van Doorn
2008-03-09 21:47 ` Ivo van Doorn [this message]
2008-03-09 21:48 ` [PATCH 20/24] rt2x00: Fix basic rate initialization Ivo van Doorn
2008-03-09 21:48 ` [PATCH 21/24] rt2x00: Fix compile error when rfkill is disabled Ivo van Doorn
2008-03-09 21:48 ` [PATCH 22/24] rt2x00: Fix RX DMA ring initialization Ivo van Doorn
2008-03-09 21:49 ` [PATCH 23/24] rt2x00: Fix rt2400pci signal Ivo van Doorn
2008-03-09 21:49 ` [PATCH 24/24] rt2x00: Release rt2x00 2.1.4 Ivo van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803092247.43406.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@redhat.com \
--cc=rt2400-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.