From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 10 Mar 2008 13:27:01 +0100
Subject: [U-Boot-Users] [PATCH] Add support for new AVR32 board
In-Reply-To: <47D5256F.9040803@miromico.ch>
References: <47D50F07.607@miromico.ch> <200803101216.47666.sr@denx.de>
	<47D5256F.9040803@miromico.ch>
Message-ID: <200803101327.01970.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 10 March 2008, Alex Raimondi wrote:
> >> This patch adds support for our  new AVR32 based board.
> >
> > Your patch is line wrapped. Please fix this and resubmit.
> > One quick comment without looking too deep into your patch:
> >
> > You are introducing a board specific flash driver. This should not be
> > necessary anymore, since the common CFI driver now also has an interface
> > to support non CFI compatible flash chips. What flash chips are you
> > using? Please see actux4 for example (CFG_FLASH_LEGACY_256Kx8).
>
> I will check your point with the flash driver...
>
> Hope this time the patch is not line wrapped.

It is again. I suggest that you first send this message to yourself, until you 
figured out how to do it correctly. And if you are working with git, I 
strongly encourage you to use git-send-email to send patches.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================