Re: NV50: Some patches that need testing.

["KoalaBR" <koala_br-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>]

Am Dienstag, 11. März 2008 23:32:10 schrieben Sie:
> Someone with a known good setup needs to test these patches.
>
> Koala_BR is the obvious candidate, but i'm sending them to the
> mailinglist anyway.
>
> These are not extremely drastic, but i still need conformation that
> they work, before i can proceed with more serious changes.
>
> Maarten.
Hello,

Ok, patch ../0004-NV50-Kill-the-connection-status-caching-which-was.patch 
breaks things for me, that is giving me a 1024x768 desktop.
I applied that patch on top of 4cf1bd9ef016a2c9fe7784fdc83f559bec464f9e plus 
patches 0001 to 0003


I have added the xrandr -q output for the correct mode. If you need it, I can 
give you output using the blob too. Just let me know.

BTW: The most my panel can do is 1280x1024 (it is a Hyundai ImageQuest L90D+)
so modes 1 + 2 in that output can't be achieved without scaling on my panel.
I am using DVI, can switch to VGA anytime if need be.

Let me know, if you need anything else

KoalaBR

P.S: To the list: Here is my first answer to stillunknown, for which I 
promptly forgot to CC the list :)
 ---------------------------------------------

Hello,

I just applied your combined patch on top of git commit 
460cb260c30467799fa31aef11946d1fe2dd6523. X came up, but didn't find my 
default mode of 1280x1024 and switched to 1024x768 instead.
The Xorg.log is attached (BTW: I always use the same xorg.conf for 
nouveau, so nothing changed on the config side of things). Output from 
xrandr -q:
*0   1024 x 768    ( 270mm x 203mm )  *60
 1    800 x 600    ( 270mm x 203mm )   60
 2    640 x 480    ( 270mm x 203mm )   60
 3    512 x 384    ( 270mm x 203mm )   120
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none
Which seems to be correct except for two things:
1. missing 1280x1024 mode which is set as default
2. Monitor is able to rotate to the right, resulting in 
   1024x1280 resolution. If the output of xrandr depends on DDC or
   BIOS there is something wrong. 

Will now update to latest revision and redo the test. If that give me 
the same results, I will use the split patches.

KoalaBR