From: venkatesh.pallipadi@intel.com
To: ak@muc.de, ebiederm@xmission.com, rdreier@cisco.com,
torvalds@linux-foundation.org, gregkh@suse.de, airlied@skynet.ie,
davej@redhat.com, mingo@elte.hu, tglx@linutronix.de,
hpa@zytor.com, akpm@linux-foundation.org, arjan@infradead.org,
jesse.barnes@intel.com
Cc: linux-kernel@vger.kernel.org,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>,
Suresh Siddha <suresh.b.siddha@intel.com>
Subject: [patch 08/13] x86: PAT phys_mem_access_prot_allowed for dev/mem mmap
Date: Tue, 18 Mar 2008 17:00:20 -0700 [thread overview]
Message-ID: <20080319000059.862269000@intel.com> (raw)
In-Reply-To: 20080319000012.439150000@intel.com
[-- Attachment #1: x86_phys_mem_access_prot.patch --]
[-- Type: text/plain, Size: 5386 bytes --]
Introduce phys_mem_access_prot_allowed(), which checks whether the mapping
is possible, without any conflicts and returns success or failure based on that.
phys_mem_access_prot() by itself does not allow failure case. This ability
to return error is needed for PAT where we may have aliasing conflicts.
x86 setup __HAVE_PHYS_MEM_ACCESS_PROT and move x86 specific code out of
/dev/mem into arch specific area.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Index: linux-2.6-x86.git/arch/x86/mm/pat.c
===================================================================
--- linux-2.6-x86.git.orig/arch/x86/mm/pat.c 2008-03-18 03:11:03.000000000 -0700
+++ linux-2.6-x86.git/arch/x86/mm/pat.c 2008-03-18 09:20:33.000000000 -0700
@@ -400,3 +400,42 @@
return err;
}
+
+/* /dev/mem interface. Use the previous mapping */
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot)
+{
+ return vma_prot;
+}
+
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t *vma_prot)
+{
+
+ if (file->f_flags & O_SYNC) {
+ *vma_prot = pgprot_noncached(*vma_prot);
+ return 1;
+ }
+
+#ifdef CONFIG_X86_32
+ /*
+ * On the PPro and successors, the MTRRs are used to set
+ * memory types for physical addresses outside main memory,
+ * so blindly setting UC or PWT on those pages is wrong.
+ * For Pentiums and earlier, the surround logic should disable
+ * caching for the high addresses through the KEN pin, but
+ * we maintain the tradition of paranoia in this code.
+ */
+ if (!pat_wc_enabled &&
+ ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
+ test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
+ test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
+ test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) &&
+ (pfn << PAGE_SHIFT) >= __pa(high_memory)) {
+ *vma_prot = pgprot_noncached(*vma_prot);
+ return 1;
+ }
+#endif
+
+ return 1;
+}
Index: linux-2.6-x86.git/include/asm-x86/pgtable.h
===================================================================
--- linux-2.6-x86.git.orig/include/asm-x86/pgtable.h 2008-03-18 02:16:04.000000000 -0700
+++ linux-2.6-x86.git/include/asm-x86/pgtable.h 2008-03-18 09:20:25.000000000 -0700
@@ -205,6 +205,15 @@
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+#ifndef __ASSEMBLY__
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t *vma_prot);
+#endif
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else /* !CONFIG_PARAVIRT */
Index: linux-2.6-x86.git/drivers/char/mem.c
===================================================================
--- linux-2.6-x86.git.orig/drivers/char/mem.c 2008-03-18 03:11:12.000000000 -0700
+++ linux-2.6-x86.git/drivers/char/mem.c 2008-03-18 09:20:33.000000000 -0700
@@ -41,36 +41,7 @@
*/
static inline int uncached_access(struct file *file, unsigned long addr)
{
-#if defined(__i386__) && !defined(__arch_um__)
- /*
- * On the PPro and successors, the MTRRs are used to set
- * memory types for physical addresses outside main memory,
- * so blindly setting PCD or PWT on those pages is wrong.
- * For Pentiums and earlier, the surround logic should disable
- * caching for the high addresses through the KEN pin, but
- * we maintain the tradition of paranoia in this code.
- */
- if (file->f_flags & O_SYNC)
- return 1;
- return !( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
- test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
- test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
- test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability) )
- && addr >= __pa(high_memory);
-#elif defined(__x86_64__) && !defined(__arch_um__)
- /*
- * This is broken because it can generate memory type aliases,
- * which can cause cache corruptions
- * But it is only available for root and we have to be bug-to-bug
- * compatible with i386.
- */
- if (file->f_flags & O_SYNC)
- return 1;
- /* same behaviour as i386. PAT always set to cached and MTRRs control the
- caching behaviour.
- Hopefully a full PAT implementation will fix that soon. */
- return 0;
-#elif defined(CONFIG_IA64)
+#if defined(CONFIG_IA64)
/*
* On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases.
*/
@@ -283,6 +254,12 @@
return written;
}
+int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+ unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
+{
+ return 1;
+}
+
#ifndef __HAVE_PHYS_MEM_ACCESS_PROT
static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
@@ -336,6 +313,10 @@
if (!range_is_allowed(vma->vm_pgoff, size))
return -EPERM;
+ if (!phys_mem_access_prot_allowed(file, vma->vm_pgoff, size,
+ &vma->vm_page_prot))
+ return -EINVAL;
+
vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
size,
vma->vm_page_prot);
--
next prev parent reply other threads:[~2008-03-19 20:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-19 0:00 [patch 00/13] x86: PAT support updated - v3 venkatesh.pallipadi
2008-03-19 0:00 ` [patch 01/13] x86: PAT documentation venkatesh.pallipadi
2008-03-19 0:00 ` [patch 02/13] x86: PAT infrastructure patch venkatesh.pallipadi
2008-03-19 20:06 ` Randy Dunlap
2008-03-24 21:22 ` Venki Pallipadi
2008-03-19 0:00 ` [patch 03/13] x86: PAT Avoid aliasing in /dev/mem read/write venkatesh.pallipadi
2008-03-19 0:00 ` [patch 04/13] x86: PAT make ioremap_change_attr non-static venkatesh.pallipadi
2008-03-19 0:00 ` [patch 05/13] x86: PAT use reserve free memtype in ioremap and iounmap venkatesh.pallipadi
2008-03-19 0:00 ` [patch 06/13] x86: PAT use reserve free memtype in set_memory_uc venkatesh.pallipadi
2008-03-19 0:00 ` [patch 07/13] x86: PAT use reserve free memtype in pci_mmap_page_range venkatesh.pallipadi
2008-03-19 0:00 ` venkatesh.pallipadi [this message]
2008-03-19 0:00 ` [patch 09/13] x86: PAT use reserve free memtype in mmap of /dev/mem venkatesh.pallipadi
2008-03-19 0:00 ` [patch 10/13] x86: PAT export resource_wc in pci sysfs venkatesh.pallipadi
2008-03-19 0:00 ` [patch 11/13] x86: PAT Add set_memory_wc() interface venkatesh.pallipadi
2008-03-19 0:00 ` [patch 12/13] x86: PAT Add ioremap_wc() interface venkatesh.pallipadi
2008-03-19 0:00 ` [patch 13/13] x86: PAT Patch to add PAT related debug prints venkatesh.pallipadi
2008-03-21 13:24 ` [patch 00/13] x86: PAT support updated - v3 Ingo Molnar
2008-03-21 14:55 ` Ingo Molnar
2008-03-21 19:26 ` Venki Pallipadi
2008-03-21 13:29 ` H. Peter Anvin
2008-03-21 19:19 ` Venki Pallipadi
2008-03-21 19:59 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080319000059.862269000@intel.com \
--to=venkatesh.pallipadi@intel.com \
--cc=airlied@skynet.ie \
--cc=ak@muc.de \
--cc=akpm@linux-foundation.org \
--cc=arjan@infradead.org \
--cc=davej@redhat.com \
--cc=ebiederm@xmission.com \
--cc=gregkh@suse.de \
--cc=hpa@zytor.com \
--cc=jesse.barnes@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rdreier@cisco.com \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.