From: Oliver Martin <oliver.martin@student.tuwien.ac.at>
To: Oliver Martin <oliver.martin@student.tuwien.ac.at>
Cc: netdev@vger.kernel.org, hvr@gnu.org, buytenh@wantstofly.org
Subject: [PATCH] Re: ep93xx_eth PHY problems
Date: Fri, 21 Mar 2008 20:22:02 +0100 [thread overview]
Message-ID: <20080321202202.129c1239@ors> (raw)
In-Reply-To: <47CD4857.2060406@student.tuwien.ac.at>
Am Tue, 04 Mar 2008 14:02:15 +0100
schrieb Oliver Martin <oliver.martin@student.tuwien.ac.at>:
>
> Now I'm having different problems: When auto-negotiation is enabled,
> it sometimes randomly changes the link state:
>
> PHY: 0:01 - Link is Down
> PHY: 0:01 - Link is Up - 100/Full
>
I've found at least one part of the problem. The MDIO clock divisor
wasn't set again after the reset in ep93xx_start_hw. It was left at the
default, resulting in a 12.5 MHz clock, which the PHY (Micrel KSZ8721BL)
didn't like too much. Calling ep93xx_mdio_reset after the reset fixed
it, the link is now perfectly stable in auto-negotiation mode.
There still seems to be another bug with auto-negotiation disabled: It
doesn't switch to 1000 Mbps any more, but most times it doesn't stay in
the intended configuration either. I haven't done any extensive
testing of this yet, though.
Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at>
--- linux-2.6.24-phy/drivers/net/arm/ep93xx_eth.c.orig 2008-03-19 15:18:29.000000000 +0100
+++ linux-2.6.24-phy/drivers/net/arm/ep93xx_eth.c 2008-03-19 15:43:44.000000000 +0100
@@ -535,6 +535,22 @@ err:
return 1;
}
+static int ep93xx_mdio_reset(struct mii_bus *bus)
+{
+ struct ep93xx_priv *ep = bus->priv;
+
+ u32 selfctl = rdl(ep, REG_SELFCTL);
+
+ selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
+
+ selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
+ selfctl |= REG_SELFCTL_PSPRS;
+
+ wrl(ep, REG_SELFCTL, selfctl);
+
+ return 0;
+}
+
static int ep93xx_start_hw(struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
@@ -553,6 +569,9 @@ static int ep93xx_start_hw(struct net_de
return 1;
}
+ /* The reset cleared REG_SELFCTL, so set the MDC divisor again */
+ ep93xx_mdio_reset(&ep->mii_bus);
+
/* Receive descriptor ring. */
addr = ep->descs_dma_addr + offsetof(struct ep93xx_descs, rdesc);
wrl(ep, REG_RXDQBADD, addr);
@@ -776,22 +795,6 @@ static int ep93xx_mdio_write(struct mii_
return 0;
}
-static int ep93xx_mdio_reset(struct mii_bus *bus)
-{
- struct ep93xx_priv *ep = bus->priv;
-
- u32 selfctl = rdl(ep, REG_SELFCTL);
-
- selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
-
- selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
- selfctl |= REG_SELFCTL_PSPRS;
-
- wrl(ep, REG_SELFCTL, selfctl);
-
- return 0;
-}
-
static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
next prev parent reply other threads:[~2008-03-21 19:22 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-04 13:02 ep93xx_eth PHY problems Oliver Martin
2008-03-21 19:22 ` Oliver Martin [this message]
2008-03-26 4:42 ` [PATCH] " Jeff Garzik
2008-03-29 18:13 ` Oliver Martin
2008-03-29 18:17 ` Lennert Buytenhek
2008-09-14 2:11 ` Jeff Garzik
2008-09-14 11:47 ` Lennert Buytenhek
2008-09-14 11:58 ` Herbert Valerio Riedel
2008-09-14 12:11 ` Oliver Martin
2008-09-14 12:12 ` Lennert Buytenhek
2008-09-14 12:24 ` Oliver Martin
2008-09-16 12:51 ` Lennert Buytenhek
2008-09-17 9:13 ` Oliver Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080321202202.129c1239@ors \
--to=oliver.martin@student.tuwien.ac.at \
--cc=buytenh@wantstofly.org \
--cc=hvr@gnu.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.