From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 04/11] mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
Date: Mon, 24 Mar 2008 20:46:46 +0300 [thread overview]
Message-ID: <20080324174646.GD19904@localhost.localdomain> (raw)
In-Reply-To: <20080324174449.GA17079@localhost.localdomain>
This is needed for BCM PHYs to work on this board.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
include/configs/MPC8360ERDK.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 27b037a..1588610 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -290,7 +290,7 @@
#define CFG_UEC1_TX_CLK QE_CLK9
#define CFG_UEC1_ETH_TYPE GIGA_ETH
#define CFG_UEC1_PHY_ADDR 2
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -301,7 +301,7 @@
#define CFG_UEC2_TX_CLK QE_CLK4
#define CFG_UEC2_ETH_TYPE GIGA_ETH
#define CFG_UEC2_PHY_ADDR 4
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
/*
--
1.5.2.2
next prev parent reply other threads:[~2008-03-24 17:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 17:44 [U-Boot-Users] [PATCH 0/11] Few MPC8360E-RDK related patches Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 01/11] uec: add support for gbit mii status readings Anton Vorontsov
2008-03-25 1:08 ` Kim Phillips
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 02/11] uec: add support for RGMII_RXID interface mode Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 03/11] uec: add support for Broadcom BCM5481 Gigabit PHY Anton Vorontsov
2008-03-24 17:46 ` Anton Vorontsov [this message]
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 05/11] mpc83xx: MPC8360E-RDK: add support for NAND Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 06/11] mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 07/11] mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 08/11] mpc83xx: MPC8360E-RDK: add dhcp command Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 09/11] mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 10/11] mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 11/11] mpc83xx: add "fsl, soc" and "fsl, immr" compatible fixups Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080324174646.GD19904@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.