From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Wed, 26 Mar 2008 11:28:19 +0000 Subject: Re: [lm-sensors] lm_sensors v2 asc7621 support Message-Id: <20080326122819.26604f0d@hyperion.delvare> List-Id: References: <47C9A8B9.20501@kenm.demon.co.uk> In-Reply-To: <47C9A8B9.20501@kenm.demon.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Ken, On Sat, 01 Mar 2008 19:04:25 +0000, Ken Milmore wrote: > I've had a go at implementing support for George Joseph's experimental > Adigilog asc7621 driver in lm_sensors 2.10.5. Find patch attached. > > I've been running this for a while with the asc76xx driver on an Intel > D975XBX2 board. It works just fine for reading the sensors, although > writing the alarm limits and such doesn't seem to work quite right. > > Hopefully this might be a starting point for someone else to add > official support for these chips to lm_sensors. For new drivers, we don't really want to add support to lm-sensors 2.10.x. Just use lm-sensors 3.0.x, which supports all hwmon drivers by design. Thanks, -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors