All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Subject: Re: [PATCH] I2C: Fix OMAP I2C status register handling in IRQ processing
Date: Fri, 28 Mar 2008 12:51:26 +0200	[thread overview]
Message-ID: <20080328105126.GA24896@atomide.com> (raw)
In-Reply-To: <20080318033815.GA23504@ubuntu-workstation>

* Seth Forshee <seth.forshee@gmail.com> [080318 05:39]:
> On Wed, Mar 12, 2008 at 12:56:10PM -0500, Seth Forshee wrote:
> > The IRQ handler in omap-i2c.c can sometimes clear status bits without
> > actually processing them.  In particular, error status bits will be
> > ignored if any of the ARDY, RRDY, RDR, XRDY, or XDR bits are
> > concurrently set.
> 
> Are there any more comments on the patch below?  If there is a problem
> with style or implementation details I will fix them and submit a new
> patch, as long as the functionality isn't affected as with the
> previous comments.  But it is possible for the error status bits to go
> unhandled and unreported (in fact it always happens for me with any
> address for which there is no slave present on a given bus), so I would
> think that it would be desirable to get a fix applied.

Pushing today.

Tony

> 
> Cheers,
> Seth
> 
> > 
> > Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
> > ---
> > 
> > More information:
> > 
> > I originally noticed this problem on a custom 2430 board I am working
> > with.  Whenever an i2c chip driver calls i2c_probe() the device would
> > be found on both i2c busses at each of the possible addresses for the
> > device.  I discovered that NACK was being set in the status register
> > but omap_i2c_xfer() still returned success because ARDY was also set.
> > 
> > This patch fixes this issue on my board and hasn't caused any problems
> > (in my admittedly light i2c usage).  I don't have immediate access to
> > an SDP board however, so it has not been tested on that platform.
> > 
> >  drivers/i2c/busses/i2c-omap.c |   28 +++++++++++++---------------
> >  1 files changed, 13 insertions(+), 15 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> > index 4777466..a16d513 100644
> > --- a/drivers/i2c/busses/i2c-omap.c
> > +++ b/drivers/i2c/busses/i2c-omap.c
> > @@ -590,7 +590,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
> >  	struct omap_i2c_dev *dev = dev_id;
> >  	u16 bits;
> >  	u16 stat, w;
> > -	int count = 0;
> > +	int err, count = 0;
> >  
> >  	if (dev->idle)
> >  		return IRQ_NONE;
> > @@ -605,10 +605,19 @@ omap_i2c_isr(int this_irq, void *dev_id)
> >  
> >  		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
> >  
> > -		if (stat & OMAP_I2C_STAT_ARDY) {
> > -			omap_i2c_complete_cmd(dev, 0);
> > -			continue;
> > +		err = 0;
> > +		if (stat & OMAP_I2C_STAT_NACK) {
> > +			err |= OMAP_I2C_STAT_NACK;
> > +			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
> > +					   OMAP_I2C_CON_STP);
> >  		}
> > +		if (stat & OMAP_I2C_STAT_AL) {
> > +			dev_err(dev->dev, "Arbitration lost\n");
> > +			err |= OMAP_I2C_STAT_AL;
> > +		}
> > +		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
> > +					OMAP_I2C_STAT_AL))
> > +			omap_i2c_complete_cmd(dev, err);
> >  		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
> >  			u8 num_bytes = 1;
> >  			if (dev->fifo_size) {
> > @@ -640,7 +649,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
> >  				}
> >  			}
> >  			omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
> > -			continue;
> >  		}
> >  		if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
> >  			u8 num_bytes = 1;
> > @@ -674,7 +682,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
> >  				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
> >  			}
> >  			omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
> > -			continue;
> >  		}
> >  		if (stat & OMAP_I2C_STAT_ROVR) {
> >  			dev_err(dev->dev, "Receive overrun\n");
> > @@ -684,15 +691,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
> >  			dev_err(dev->dev, "Transmit overflow\n");
> >  			dev->cmd_err |= OMAP_I2C_STAT_XUDF;
> >  		}
> > -		if (stat & OMAP_I2C_STAT_NACK) {
> > -			omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
> > -			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
> > -					   OMAP_I2C_CON_STP);
> > -		}
> > -		if (stat & OMAP_I2C_STAT_AL) {
> > -			dev_err(dev->dev, "Arbitration lost\n");
> > -			omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
> > -		}
> >  	}
> >  
> >  	return count ? IRQ_HANDLED : IRQ_NONE;
> > -- 
> > 1.5.2.5
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

      reply	other threads:[~2008-03-28 10:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-12 17:56 [PATCH] I2C: Fix OMAP I2C status register handling in IRQ processing Seth Forshee
2008-03-12 18:14 ` Felipe Balbi
2008-03-12 19:51   ` Seth Forshee
2008-03-18  3:38 ` Seth Forshee
2008-03-28 10:51   ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080328105126.GA24896@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.