From: akpm@linux-foundation.org
To: paulus@samba.org
Cc: akpm@linux-foundation.org, linuxppc-dev@ozlabs.org
Subject: [patch 12/24] rapidio: change the kernel configurated RapidIO system size to auto-probing
Date: Fri, 28 Mar 2008 14:21:15 -0700 [thread overview]
Message-ID: <200803282121.m2SLLFWN010703@imap1.linux-foundation.org> (raw)
From: Zhang Wei <wei.zhang@freescale.com>
The RapidIO system size will auto probe in RIO setup. The route table and
rionet_active in rionet.c are changed to be allocated dynamically according
the system size.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/sysdev/fsl_rio.c | 6 +++
drivers/net/rionet.c | 16 ++++++++-
drivers/rapidio/Kconfig | 8 ----
drivers/rapidio/rio-scan.c | 55 ++++++++++++++++++++++----------
drivers/rapidio/rio-sysfs.c | 3 +
drivers/rapidio/rio.c | 2 -
drivers/rapidio/rio.h | 9 +----
include/linux/rio.h | 14 ++++----
8 files changed, 71 insertions(+), 42 deletions(-)
diff -puN arch/powerpc/sysdev/fsl_rio.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing arch/powerpc/sysdev/fsl_rio.c
--- a/arch/powerpc/sysdev/fsl_rio.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/arch/powerpc/sysdev/fsl_rio.c
@@ -1007,6 +1007,12 @@ int fsl_rio_setup(struct of_device *dev)
rio_register_mport(port);
priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
diff -puN drivers/net/rionet.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/net/rionet.c
--- a/drivers/net/rionet.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/net/rionet.c
@@ -77,7 +77,7 @@ static int rionet_capable = 1;
* could be made into a hash table to save memory depending
* on system trade-offs.
*/
-static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+static struct rio_dev **rionet_active;
#define is_rionet_capable(pef, src_ops, dst_ops) \
((pef & RIO_PEF_INB_MBOX) && \
@@ -195,7 +195,8 @@ static int rionet_start_xmit(struct sk_b
}
if (eth->h_dest[0] & 0x01) {
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
+ i++)
if (rionet_active[i])
rionet_queue_tx_msg(skb, ndev,
rionet_active[i]);
@@ -385,6 +386,8 @@ static void rionet_remove(struct rio_dev
struct net_device *ndev = NULL;
struct rionet_peer *peer, *tmp;
+ free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
+ __ilog2(sizeof(void *)) + 4 : 0);
unregister_netdev(ndev);
kfree(ndev);
@@ -443,6 +446,15 @@ static int rionet_setup_netdev(struct ri
goto out;
}
+ rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
+ mport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0);
+ if (!rionet_active) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memset((void *)rionet_active, 0, sizeof(void *) *
+ RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
+
/* Set up private area */
rnet = (struct rionet_private *)ndev->priv;
rnet->mport = mport;
diff -puN drivers/rapidio/Kconfig~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/rapidio/Kconfig
--- a/drivers/rapidio/Kconfig~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/rapidio/Kconfig
@@ -1,14 +1,6 @@
#
# RapidIO configuration
#
-config RAPIDIO_8_BIT_TRANSPORT
- bool "8-bit transport addressing"
- depends on RAPIDIO
- ---help---
- By default, the kernel assumes a 16-bit addressed RapidIO
- network. By selecting this option, the kernel will support
- an 8-bit addressed network.
-
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
diff -puN drivers/rapidio/rio-scan.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/rapidio/rio-scan.c
--- a/drivers/rapidio/rio-scan.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/rapidio/rio-scan.c
@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_
rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
- return RIO_GET_DID(result);
+ return RIO_GET_DID(port->sys_size, result);
}
/**
@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
- RIO_SET_DID(did));
+ RIO_SET_DID(port->sys_size, did));
}
/**
@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio
*/
static void rio_local_set_device_id(struct rio_mport *port, u16 did)
{
- rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+ rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+ did));
}
/**
@@ -350,8 +351,18 @@ static struct rio_dev *rio_setup_device(
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ rswitch->route_table = kzalloc(sizeof(u8)*
+ RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+ GFP_KERNEL);
+ if (!rswitch->route_table) {
+ kfree(rdev);
+ rdev = NULL;
+ kfree(rswitch);
+ goto out;
+ }
/* Initialize switch route table */
- for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+ for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+ rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
rdev->rswitch = rswitch;
sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
@@ -480,7 +491,7 @@ static u16 rio_get_host_deviceid_lock(st
{
u32 result;
- rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
RIO_HOST_DID_LOCK_CSR, &result);
return (u16) (result & 0xffff);
@@ -571,14 +582,16 @@ static int rio_enum_peer(struct rio_net
}
/* Attempt to acquire device lock */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
< port->host_deviceid) {
/* Delay a bit */
mdelay(1);
/* Attempt to acquire device lock again */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
}
@@ -590,7 +603,9 @@ static int rio_enum_peer(struct rio_net
}
/* Setup new RIO device */
- if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+ rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+ hopcount, 1);
+ if (rdev) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
} else
@@ -598,7 +613,8 @@ static int rio_enum_peer(struct rio_net
if (rio_is_switch(rdev)) {
next_switchid++;
- sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
+ sw_inport = rio_get_swpinfo_inport(port,
+ RIO_ANY_DESTID(port->sys_size), hopcount);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -612,7 +628,8 @@ static int rio_enum_peer(struct rio_net
}
num_ports =
- rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+ rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
@@ -624,13 +641,15 @@ static int rio_enum_peer(struct rio_net
cur_destid = next_destid;
if (rio_sport_is_active
- (port, RIO_ANY_DESTID, hopcount, port_num)) {
+ (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+ port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_route_add_entry(port, rdev->rswitch,
- RIO_GLOBAL_TABLE,
- RIO_ANY_DESTID, port_num);
+ RIO_GLOBAL_TABLE,
+ RIO_ANY_DESTID(port->sys_size),
+ port_num);
if (rio_enum_peer(net, port, hopcount + 1) < 0)
return -1;
@@ -735,7 +754,8 @@ rio_disc_peer(struct rio_net *net, struc
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
- for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+ for (ndestid = 0;
+ ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
@@ -917,7 +937,9 @@ static void rio_build_route_tables(void)
list_for_each_entry(rdev, &rio_devices, global_list)
if (rio_is_switch(rdev))
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0;
+ i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rio_route_get_entry
(rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
i, &sport) < 0)
@@ -981,7 +1003,8 @@ int rio_disc_mport(struct rio_mport *mpo
del_timer_sync(&rio_enum_timer);
pr_debug("done\n");
- if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+ if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+ 0) < 0) {
printk(KERN_INFO
"RIO: master port %d device has failed discovery\n",
mport->id);
diff -puN drivers/rapidio/rio-sysfs.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/rapidio/rio-sysfs.c
--- a/drivers/rapidio/rio-sysfs.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/rapidio/rio-sysfs.c
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device
if (!rdev->rswitch)
goto out;
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
continue;
str +=
diff -puN drivers/rapidio/rio.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/rapidio/rio.c
--- a/drivers/rapidio/rio.c~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/rapidio/rio.c
@@ -43,7 +43,7 @@ u16 rio_local_get_device_id(struct rio_m
rio_local_read_config_32(port, RIO_DID_CSR, &result);
- return (RIO_GET_DID(result));
+ return (RIO_GET_DID(port->sys_size, result));
}
/**
diff -puN drivers/rapidio/rio.h~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing drivers/rapidio/rio.h
--- a/drivers/rapidio/rio.h~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/drivers/rapidio/rio.h
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_ro
DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
vid, did, add_hook, get_hook)
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x) ((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x) (x & 0xffff)
-#define RIO_SET_DID(x) (x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff -puN include/linux/rio.h~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing include/linux/rio.h
--- a/include/linux/rio.h~rapidio-change-the-kernel-configurated-rapidio-system-size-to-auto-probing
+++ a/include/linux/rio.h
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/rio_regs.h>
-#define RIO_ANY_DESTID 0xff
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
@@ -39,11 +38,8 @@
entry is invalid (no route
exists for the device ID) */
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_MAX_ROUTE_ENTRIES (1 << 8)
-#else
-#define RIO_MAX_ROUTE_ENTRIES (1 << 16)
-#endif
+#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff)
#define RIO_MAX_MBOX 4
#define RIO_MAX_MSG_SIZE 0x1000
@@ -178,6 +174,10 @@ struct rio_mport {
unsigned char id; /* port ID, unique among all ports */
unsigned char index; /* port index, unique among all port
interfaces of the same type */
+ unsigned int sys_size; /* RapidIO common transport system size.
+ * 0 - Small size. 256 devices.
+ * 1 - Large size, 65536 devices.
+ */
unsigned char name[40];
void *priv; /* Master port private data */
};
@@ -213,7 +213,7 @@ struct rio_switch {
u16 switchid;
u16 hopcount;
u16 destid;
- u8 route_table[RIO_MAX_ROUTE_ENTRIES];
+ u8 *route_table;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
_
reply other threads:[~2008-03-28 21:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803282121.m2SLLFWN010703@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.