From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 5/6] ide: add IDE_HFLAG_MMIO host flag
Date: Sun, 30 Mar 2008 21:43:56 +0200 [thread overview]
Message-ID: <200803302143.56792.bzolnier@gmail.com> (raw)
Add IDE_HFLAG_MMIO host flag and set it for hosts which use
default_hwif_mmiops().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/arm/icside.c | 2 +-
drivers/ide/arm/palm_bk3710.c | 1 +
drivers/ide/arm/rapide.c | 1 +
drivers/ide/legacy/ide_platform.c | 4 +++-
drivers/ide/mips/swarm.c | 1 +
drivers/ide/pci/sgiioc4.c | 1 +
drivers/ide/pci/siimage.c | 1 +
drivers/ide/ppc/pmac.c | 1 +
include/linux/ide.h | 2 ++
9 files changed, 12 insertions(+), 2 deletions(-)
Index: b/drivers/ide/arm/icside.c
===================================================================
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -481,7 +481,7 @@ static const struct ide_port_info icside
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
.dma_ops = &icside_v6_dma_ops,
- .host_flags = IDE_HFLAG_SERIALIZE,
+ .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
};
Index: b/drivers/ide/arm/palm_bk3710.c
===================================================================
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -342,6 +342,7 @@ static const struct ide_port_ops palm_bk
static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
.init_dma = palm_bk3710_init_dma,
.port_ops = &palm_bk3710_ports_ops,
+ .host_flags = IDE_HFLAG_MMIO,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA4, /* (input clk 99MHz) */
.mwdma_mask = ATA_MWDMA2,
Index: b/drivers/ide/arm/rapide.c
===================================================================
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -53,6 +53,7 @@ rapide_probe(struct expansion_card *ec,
ide_init_port_hw(hwif, &hw);
+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
idx[0] = hwif->index;
Index: b/drivers/ide/legacy/ide_platform.c
===================================================================
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -101,8 +101,10 @@ static int __devinit plat_ide_probe(stru
ide_init_port_hw(hwif, &hw);
- if (mmio)
+ if (mmio) {
+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
+ }
idx[0] = hwif->index;
Index: b/drivers/ide/mips/swarm.c
===================================================================
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -109,6 +109,7 @@ static int __devinit swarm_ide_probe(str
base = ioremap(offset, size);
/* Setup MMIO ops. */
+ hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
hwif->chipset = ide_generic;
Index: b/drivers/ide/pci/sgiioc4.c
===================================================================
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -573,6 +573,7 @@ static const struct ide_port_info sgiioc
.init_dma = ide_dma_sgiioc4,
.port_ops = &sgiioc4_port_ops,
.dma_ops = &sgiioc4_dma_ops,
+ .host_flags = IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2_ONLY,
};
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -630,6 +630,7 @@ static void __devinit init_mmio_iops_sii
* Fill in the basic HWIF bits
*/
+ hwif->host_flags |= IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
hwif->hwif_data = addr;
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -942,6 +942,7 @@ static const struct ide_port_info pmac_p
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_UNMASK_IRQS,
+ IDE_HFLAG_MMIO,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
};
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1057,6 +1057,8 @@ enum {
IDE_HFLAG_NO_DMA = (1 << 14),
/* check if host is PCI IDE device before allowing DMA */
IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* host uses MMIO */
+ IDE_HFLAG_MMIO = (1 << 16),
/* host is CS5510/CS5520 */
IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
/* no LBA48 */
reply other threads:[~2008-03-30 19:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803302143.56792.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.