From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ide: remove ->INS{W,L} and ->OUTS{W,L} methods
Date: Sun, 30 Mar 2008 21:44:42 +0200 [thread overview]
Message-ID: <200803302144.43011.bzolnier@gmail.com> (raw)
* Use ins{w,l}()/outs{w,l}() and __ide_mm_ins{w,l}()/__ide_mm_outs{w,l}()
directly in ata_{in,out}put_data() (by using IDE_HFLAG_MMIO host flag to
decide which I/O ops are required).
* Remove no longer needed ->INS{W,L} and ->OUTS{W,L} methods (ide-h8300,
au1xxx-ide and scc_pata implement their own ->{in,out}put_data methods).
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/h8300/ide-h8300.c | 4 -
drivers/ide/ide-iops.c | 114 +++++++++++++++++-------------------------
drivers/ide/mips/au1xxx-ide.c | 3 -
drivers/ide/pci/scc_pata.c | 4 -
include/linux/ide.h | 4 -
5 files changed, 48 insertions(+), 81 deletions(-)
Index: b/drivers/ide/h8300/ide-h8300.c
===================================================================
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -88,11 +88,7 @@ static inline void hwif_setup(ide_hwif_t
hwif->output_data = h8300_output_data;
hwif->OUTW = mm_outw;
- hwif->OUTSW = mm_outsw;
hwif->INW = mm_inw;
- hwif->INSW = mm_insw;
- hwif->OUTSL = NULL;
- hwif->INSL = NULL;
}
static int __init h8300_ide_init(void)
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -42,16 +42,6 @@ static u16 ide_inw (unsigned long port)
return (u16) inw(port);
}
-static void ide_insw (unsigned long port, void *addr, u32 count)
-{
- insw(port, addr, count);
-}
-
-static void ide_insl (unsigned long port, void *addr, u32 count)
-{
- insl(port, addr, count);
-}
-
static void ide_outb (u8 val, unsigned long port)
{
outb(val, port);
@@ -67,27 +57,13 @@ static void ide_outw (u16 val, unsigned
outw(val, port);
}
-static void ide_outsw (unsigned long port, void *addr, u32 count)
-{
- outsw(port, addr, count);
-}
-
-static void ide_outsl (unsigned long port, void *addr, u32 count)
-{
- outsl(port, addr, count);
-}
-
void default_hwif_iops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_outb;
hwif->OUTBSYNC = ide_outbsync;
hwif->OUTW = ide_outw;
- hwif->OUTSW = ide_outsw;
- hwif->OUTSL = ide_outsl;
hwif->INB = ide_inb;
hwif->INW = ide_inw;
- hwif->INSW = ide_insw;
- hwif->INSL = ide_insl;
}
/*
@@ -104,16 +80,6 @@ static u16 ide_mm_inw (unsigned long por
return (u16) readw((void __iomem *) port);
}
-static void ide_mm_insw (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_insw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_insl (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_insl((void __iomem *) port, addr, count);
-}
-
static void ide_mm_outb (u8 value, unsigned long port)
{
writeb(value, (void __iomem *) port);
@@ -129,16 +95,6 @@ static void ide_mm_outw (u16 value, unsi
writew(value, (void __iomem *) port);
}
-static void ide_mm_outsw (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_outsw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_outsl (unsigned long port, void *addr, u32 count)
-{
- __ide_mm_outsl((void __iomem *) port, addr, count);
-}
-
void default_hwif_mmiops (ide_hwif_t *hwif)
{
hwif->OUTB = ide_mm_outb;
@@ -146,12 +102,8 @@ void default_hwif_mmiops (ide_hwif_t *hw
this one is controller specific! */
hwif->OUTBSYNC = ide_mm_outbsync;
hwif->OUTW = ide_mm_outw;
- hwif->OUTSW = ide_mm_outsw;
- hwif->OUTSL = ide_mm_outsl;
hwif->INB = ide_mm_inb;
hwif->INW = ide_mm_inw;
- hwif->INSW = ide_mm_insw;
- hwif->INSL = ide_mm_insl;
}
EXPORT_SYMBOL(default_hwif_mmiops);
@@ -202,24 +154,39 @@ static void ata_input_data(ide_drive_t *
struct ide_io_ports *io_ports = &hwif->io_ports;
unsigned long data_addr = io_ports->data_addr;
u8 io_32bit = drive->io_32bit;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
len++;
if (io_32bit) {
- if (io_32bit & 2) {
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
+ if (io_32bit & 2) {
local_irq_save(flags);
ata_vlb_sync(drive, io_ports->nsect_addr);
- hwif->INSL(data_addr, buf, len / 4);
+ }
+
+ if (mmio)
+ __ide_mm_insl((void __iomem *)data_addr, buf, len / 4);
+ else
+ insl(data_addr, buf, len / 4);
+
+ if (io_32bit & 2)
local_irq_restore(flags);
- } else
- hwif->INSL(data_addr, buf, len / 4);
- if ((len & 3) >= 2)
- hwif->INSW(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- hwif->INSW(data_addr, buf, len / 2);
+ if ((len & 3) >= 2) {
+ if (mmio)
+ __ide_mm_insw((void __iomem *)data_addr,
+ (u8 *)buf + (len & ~3), 1);
+ else
+ insw(data_addr, (u8 *)buf + (len & ~3), 1);
+ }
+ } else {
+ if (mmio)
+ __ide_mm_insw((void __iomem *)data_addr, buf, len / 2);
+ else
+ insw(data_addr, buf, len / 2);
+ }
}
/*
@@ -231,22 +198,37 @@ static void ata_output_data(ide_drive_t
struct ide_io_ports *io_ports = &hwif->io_ports;
unsigned long data_addr = io_ports->data_addr;
u8 io_32bit = drive->io_32bit;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
if (io_32bit) {
- if (io_32bit & 2) {
- unsigned long flags;
+ unsigned long uninitialized_var(flags);
+ if (io_32bit & 2) {
local_irq_save(flags);
ata_vlb_sync(drive, io_ports->nsect_addr);
- hwif->OUTSL(data_addr, buf, len / 4);
+ }
+
+ if (mmio)
+ __ide_mm_outsl((void __iomem *)data_addr, buf, len / 4);
+ else
+ outsl(data_addr, buf, len / 4);
+
+ if (io_32bit & 2)
local_irq_restore(flags);
- } else
- hwif->OUTSL(data_addr, buf, len / 4);
- if ((len & 3) >= 2)
- hwif->OUTSW(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- hwif->OUTSW(data_addr, buf, len / 2);
+ if ((len & 3) >= 2) {
+ if (mmio)
+ __ide_mm_outsw((void __iomem *)data_addr,
+ (u8 *)buf + (len & ~3), 1);
+ else
+ outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+ }
+ } else {
+ if (mmio)
+ __ide_mm_outsw((void __iomem *)data_addr, buf, len / 2);
+ else
+ outsw(data_addr, buf, len / 2);
+ }
}
void default_hwif_transport(ide_hwif_t *hwif)
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -613,9 +613,6 @@ static int au_ide_probe(struct device *d
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
hwif->input_data = au1xxx_input_data;
hwif->output_data = au1xxx_output_data;
-
- hwif->INSW = auide_insw;
- hwif->OUTSW = auide_outsw;
#endif
hwif->select_data = 0; /* no chipset-specific code */
hwif->config_data = 0; /* no chipset-specific code */
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -624,13 +624,9 @@ static void __devinit init_mmio_iops_scc
hwif->INB = scc_ide_inb;
hwif->INW = scc_ide_inw;
- hwif->INSW = scc_ide_insw;
- hwif->INSL = scc_ide_insl;
hwif->OUTB = scc_ide_outb;
hwif->OUTBSYNC = scc_ide_outbsync;
hwif->OUTW = scc_ide_outw;
- hwif->OUTSW = scc_ide_outsw;
- hwif->OUTSL = scc_ide_outsl;
io_ports->data_addr = dma_base + 0x20;
io_ports->error_addr = dma_base + 0x24;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -477,13 +477,9 @@ typedef struct hwif_s {
void (*OUTB)(u8 addr, unsigned long port);
void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
void (*OUTW)(u16 addr, unsigned long port);
- void (*OUTSW)(unsigned long port, void *addr, u32 count);
- void (*OUTSL)(unsigned long port, void *addr, u32 count);
u8 (*INB)(unsigned long port);
u16 (*INW)(unsigned long port);
- void (*INSW)(unsigned long port, void *addr, u32 count);
- void (*INSL)(unsigned long port, void *addr, u32 count);
/* dma physical region descriptor table (cpu view) */
unsigned int *dmatable_cpu;
reply other threads:[~2008-03-30 19:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803302144.43011.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.