All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Laue <Sascha.Laue@gmx.biz>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5
Date: Tue, 01 Apr 2008 15:13:03 +0200	[thread overview]
Message-ID: <20080401131303.17520@gmx.net> (raw)
In-Reply-To: <20080401083320.B918D24544@gemini.denx.de>

You are right! I've checked it again and find the mistake by myself. 

Subject: [PATCH] bugfix: lwmon5 watchdog post
If the hardware watchdog detects a voltage error, the watchdog set GPIO62 to low.
The watchdog POST have to detect this lowpegel.

Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
---
 post/board/lwmon5/watchdog.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
index 48ff687..899fbfb 100644
--- a/post/board/lwmon5/watchdog.c
+++ b/post/board/lwmon5/watchdog.c
@@ -55,7 +55,7 @@ static void watchdog_magic_write(uint value)
 
 int sysmon1_post_test(int flags)
 {
-	if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
+	if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS) == 0) {
 		/*
 		 * 3.1. GPIO62 is low
 		 * Assuming system voltage failure.
-- 
1.5.2.4

-------- Original-Nachricht --------
> Datum: Tue, 01 Apr 2008 10:33:20 +0200
> Von: Wolfgang Denk <wd@denx.de>
> An: "Sascha Laue" <Sascha.Laue@gmx.biz>
> CC: u-boot-users at lists.sourceforge.net
> Betreff: Re: [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5

> In message <20080401075941.145820@gmx.net> you wrote:
> > bugfix: the watchdog post for lwmon5 doesn't work. This Patch fix it.
> > To trigger and activate the watchdog correct it is necessary to create 2
> pulses.
> > Lowpegel on GPIO62 point to a voltagefailure.
> 
> Please fix English ("correct", "Lowpegel", "voltagefailure").
> 
> Is it really 2 pulses - or just one, consisting of 
> 
> > Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
> ...
> > -	if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
> > +	if (0 == gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
> 
> Please write that as:
> 
> 	if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS) == 0) {
> or
> 	if (!gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
> 
> >  		 * 3.1. GPIO62 is low
> >  		 * Assuming system voltage failure.
> > @@ -99,6 +99,9 @@ int lwmon5_watchdog_post_test(int flags)
> >  		ints = disable_interrupts ();
> >  		/* 3.2.2. strobe watchdog once */
> >  		WATCHDOG_RESET();
> > +		base = post_time_ms (0);
> > +		while (post_time_ms (base) < 2)
> > +		WATCHDOG_RESET();
> 
> Are you absolutely sure that is needed?
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Tactical? TACTICAL!?!? Hey, buddy, we went from kilotons to  megatons
> several  minutes  ago.  We don't need no stinkin' tactical nukes. (By
> the way, do you have change for 10 million people?)           - lwall

  parent reply	other threads:[~2008-04-01 13:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-01  7:59 [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5 Sascha Laue
2008-04-01  8:33 ` Wolfgang Denk
2008-04-01 11:32   ` Wolfgang Denk
2008-04-01 13:13   ` Sascha Laue [this message]
2008-04-14  6:33     ` Wolfgang Denk
2008-04-14 17:44       ` Detlev Zundel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080401131303.17520@gmx.net \
    --to=sascha.laue@gmx.biz \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.