From: "Mihai Donțu" <mihai.dontu@gmail.com>
To: Tim Ricketts <tr@earth.li>
Cc: Michael Smith <msmith@xiph.org>,
LKML <linux-kernel@vger.kernel.org>,
Andy Wingo <wingo@fluendo.com>
Subject: Re: gettimeofday() jumping into the future
Date: Wed, 2 Apr 2008 07:27:51 +0300 [thread overview]
Message-ID: <200804020727.51985.mihai.dontu@gmail.com> (raw)
In-Reply-To: <200804020726.11300.mihai.dontu@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2114 bytes --]
On Wednesday 02 April 2008, Mihai Donțu wrote:
> On Monday 31 March 2008, Tim Ricketts wrote:
> > On Thu, 23 Aug 2007, Michael Smith wrote:
> >
> > > We've been seeing some strange behaviour on some of our applications
> > > recently. I've tracked this down to gettimeofday() returning spurious
> > > values occasionally.
> > >
> > > Specifically, gettimeofday() will suddenly, for a single call, return
> > > a value about 4398 seconds (~1 hour 13 minutes) in the future. The
> > > following call goes back to a normal value.
> >
> > I have also seen this.
>
> I don't know if gettimeofday() and dmesg's logging facility use the same
> time source, but I'm seeing jumps into the past:
>
> [ 11.010300] ACPI: SSDT 3F6D3F27, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
> [ 9.344283] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 9.344528] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 9.344989] ACPI: SSDT 3F6D4374, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
> [ 9.345458] ACPI: SSDT 3F6D40ED, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
> [ 11.013089] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>
> and the future:
>
> [ 11.081332] usb 1-2: new high speed USB device using ehci_hcd and address 2
> [ 12.748489] usb usb4: configuration #1 chosen from 1 choice
> [ 12.748653] hub 4-0:1.0: USB hub found
> [ 12.748772] hub 4-0:1.0: 2 ports detected
> [ 12.849090] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
> [ 12.849338] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 12.849341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 12.849505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [ 12.849734] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
> [ 12.850020] usb usb5: configuration #1 chosen from 1 choice
> [ 12.850185] hub 5-0:1.0: USB hub found
> [ 12.850311] hub 5-0:1.0: 2 ports detected
> [ 11.194688] usb 1-2: configuration #1 chosen from 1 choice
>
> I have a 2.6.24, 64bit, SMP kernel (Intel Core 2 Duo).
The full dmesg, attached.
--
Mihai Donțu
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 28859 bytes --]
[ 0.000000] Linux version 2.6.24.4 (root@mdontu-dell) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP PREEMPT Tue Mar 25 01:41:54 EET 2008
[ 0.000000] Command line: root=/dev/sda7 nohz=on libata.noacpi=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable)
[ 0.000000] BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 259795) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FC1F0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 3F6D3A0F, 003C (r1 DELL M07 27D7051C ASL 61)
[ 0.000000] ACPI: FACP 3F6D4800, 0074 (r1 DELL M07 27D7051C ASL 61)
[ 0.000000] ACPI: DSDT 3F6D5400, 49A3 (r1 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 3F6E3C00, 0040
[ 0.000000] ACPI: HPET 3F6D4F00, 0038 (r1 DELL M07 1 ASL 61)
[ 0.000000] ACPI: APIC 3F6D5000, 0068 (r1 DELL M07 27D7051C ASL 47)
[ 0.000000] ACPI: MCFG 3F6D4FC0, 003E (r16 DELL M07 27D7051C ASL 61)
[ 0.000000] ACPI: SLIC 3F6D509C, 0176 (r1 DELL M07 27D7051C ASL 61)
[ 0.000000] ACPI: SSDT 3F6D3A4B, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 259795) 1 entries of 256 used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 259795
[ 0.000000] On node 0 totalpages: 259698
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1954 pages reserved
[ 0.000000] DMA zone: 1989 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3495 pages used for memmap
[ 0.000000] DMA32 zone: 252204 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 36896 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254193
[ 0.000000] Kernel command line: root=/dev/sda7 nohz=on libata.noacpi=0
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 8.887544] Marking TSC unstable due to TSCs unsynchronized
[ 8.887546] time.c: Detected 1662.506 MHz processor.
[ 8.891109] Console: colour VGA+ 80x25
[ 8.891113] console [tty0] enabled
[ 8.898653] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 8.899199] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 8.899416] Checking aperture...
[ 8.913856] Memory: 1014504k/1039180k available (4414k kernel code, 23992k reserved, 2210k data, 288k init)
[ 8.914117] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 8.973397] Calibrating delay using timer specific routine.. 3327.78 BogoMIPS (lpj=1663893)
[ 8.973683] Mount-cache hash table entries: 256
[ 8.973970] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 8.974121] CPU: L2 cache: 2048K
[ 8.974243] using mwait in idle threads.
[ 8.974366] CPU: Physical Processor ID: 0
[ 8.974504] CPU: Processor Core ID: 0
[ 8.974634] CPU0: Thermal monitoring enabled (TM2)
[ 8.974771] SMP alternatives: switching to UP code
[ 8.976090] ACPI: Core revision 20070126
[ 8.990904] Using local APIC timer interrupts.
[ 9.051083] APIC timer calibration result 10390656
[ 9.051085] Detected 10.390 MHz APIC timer.
[ 9.051276] SMP alternatives: switching to SMP code
[ 9.052146] Booting processor 1/2 APIC 0x1
[ 10.729609] Initializing CPU#1
[ 10.789900] Calibrating delay using timer specific routine.. 3324.86 BogoMIPS (lpj=1662431)
[ 10.789907] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.789909] CPU: L2 cache: 2048K
[ 10.789912] CPU: Physical Processor ID: 0
[ 10.789913] CPU: Processor Core ID: 1
[ 10.789920] CPU1: Thermal monitoring enabled (TM2)
[ 10.790277] Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 9.123498] Brought up 2 CPUs
[ 10.791734] net_namespace: 120 bytes
[ 10.792239] NET: Registered protocol family 16
[ 10.792602] ACPI: bus type pci registered
[ 10.794442] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 10.802102] ACPI: EC: Look up EC in DSDT
[ 10.811113] ACPI: Interpreter enabled
[ 10.811232] ACPI: (supports S0 S3 S5)
[ 10.811452] ACPI: Using IOAPIC for interrupt routing
[ 10.834574] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.835515] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 10.835637] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 10.836717] PCI: Transparent bridge - 0000:00:1e.0
[ 10.836924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.837537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 10.837736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 10.837880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 10.855705] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 10.856099] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 10.856478] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 10.856935] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 10.857393] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 10.858112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 10.858834] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 10.859557] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 10.860307] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.860457] pnp: PnP ACPI init
[ 10.860576] ACPI: bus type pnp registered
[ 10.878488] pnpacpi: exceeded the max number of mem resources: 12
[ 10.904597] pnp: PnP ACPI: found 13 devices
[ 10.904714] ACPI: ACPI bus type pnp unregistered
[ 10.905038] SCSI subsystem initialized
[ 10.905204] libata version 3.00 loaded.
[ 10.905344] usbcore: registered new interface driver usbfs
[ 10.905503] usbcore: registered new interface driver hub
[ 10.905666] usbcore: registered new device driver usb
[ 10.906004] PCI: Using ACPI for IRQ routing
[ 10.906122] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.910112] Bluetooth: Core ver 2.11
[ 10.910352] NET: Registered protocol family 31
[ 10.910469] Bluetooth: HCI device and connection manager initialized
[ 10.910591] Bluetooth: HCI socket layer initialized
[ 10.914136] PCI-GART: No AMD northbridge found.
[ 10.914258] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.914501] hpet0: 3 64-bit timers, 14318180 Hz
[ 9.248892] Time: hpet clocksource has been installed.
[ 9.249021] Switched to high resolution mode on CPU 0
[ 10.916102] Switched to high resolution mode on CPU 1
[ 10.920037] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 10.920160] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 10.920281] system 00:00: iomem range 0xc0000-0xcffff has been reserved
[ 10.920401] system 00:00: iomem range 0xe0000-0xfffff has been reserved
[ 10.920521] system 00:00: iomem range 0x100000-0x3f6d33ff could not be reserved
[ 10.920718] system 00:00: iomem range 0x3f6d3400-0x3f6fffff could not be reserved
[ 10.920919] system 00:00: iomem range 0x3f700000-0x3f7fffff could not be reserved
[ 10.921123] system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved
[ 10.921323] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 10.921522] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 10.921722] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 10.921925] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 10.922134] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 10.922255] system 00:02: ioport range 0x1000-0x1005 has been reserved
[ 10.922376] system 00:02: ioport range 0x1008-0x100f has been reserved
[ 10.922500] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 10.922621] system 00:03: ioport range 0x1006-0x1007 has been reserved
[ 10.922744] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 10.922865] system 00:03: ioport range 0x1060-0x107f has been reserved
[ 10.922986] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 10.923112] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 10.923233] system 00:03: ioport range 0x1010-0x102f has been reserved
[ 10.923353] system 00:03: ioport range 0x809-0x809 has been reserved
[ 10.923479] system 00:08: ioport range 0xc80-0xcff could not be reserved
[ 10.923600] system 00:08: ioport range 0x910-0x91f has been reserved
[ 10.923720] system 00:08: ioport range 0x920-0x92f has been reserved
[ 10.923843] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 10.923964] system 00:08: ioport range 0x930-0x97f has been reserved
[ 10.924094] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[ 10.924865] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 10.925116] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 10.949894] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[ 10.950067] PCI: Bridge: 0000:00:1c.0
[ 10.950182] IO window: disabled.
[ 10.950301] MEM window: disabled.
[ 10.950418] PREFETCH window: disabled.
[ 10.950538] PCI: Bridge: 0000:00:1c.1
[ 10.950652] IO window: disabled.
[ 10.950776] MEM window: efd00000-efdfffff
[ 10.953105] PREFETCH window: disabled.
[ 10.953236] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 10.953353] IO window: 00001400-000014ff
[ 10.953471] IO window: 00001800-000018ff
[ 10.953591] PREFETCH window: 50000000-53ffffff
[ 10.953715] MEM window: 54000000-57ffffff
[ 10.953832] PCI: Bridge: 0000:00:1e.0
[ 10.953951] IO window: disabled.
[ 10.954069] MEM window: efc00000-efcfffff
[ 10.954187] PREFETCH window: disabled.
[ 10.954339] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.954573] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.954597] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 10.954834] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.954848] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.954865] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[ 10.954993] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 10.955240] NET: Registered protocol family 2
[ 10.965010] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 10.965387] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 10.966413] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 10.967184] TCP: Hash tables configured (established 131072 bind 65536)
[ 10.967305] TCP reno registered
[ 10.971034] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 10.971906] Total HugeTLB memory allocated, 0
[ 10.975293] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.975741] NTFS driver 2.1.29 [Flags: R/O].
[ 10.976009] fuse init (API version 7.9)
[ 10.976584] io scheduler noop registered
[ 10.976707] io scheduler deadline registered
[ 10.976956] io scheduler cfq registered (default)
[ 10.977087] Boot video device is 0000:00:02.0
[ 10.978612] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.978678] assign_interrupt_mode Found MSI capability
[ 10.978862] Allocate Port Service[0000:00:1c.0:pcie00]
[ 10.978914] Allocate Port Service[0000:00:1c.0:pcie02]
[ 10.978955] Allocate Port Service[0000:00:1c.0:pcie03]
[ 10.979064] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.979124] assign_interrupt_mode Found MSI capability
[ 10.979288] Allocate Port Service[0000:00:1c.1:pcie00]
[ 10.979328] Allocate Port Service[0000:00:1c.1:pcie02]
[ 10.979372] Allocate Port Service[0000:00:1c.1:pcie03]
[ 10.980220] ACPI: AC Adapter [AC] (on-line)
[ 11.007676] ACPI: Battery Slot [BAT0] (battery present)
[ 11.007848] ACPI: Battery Slot [BAT1] (battery absent)
[ 11.008102] input: Lid Switch as /class/input/input0
[ 11.008630] ACPI: Lid Switch [LID]
[ 11.008816] input: Power Button (CM) as /class/input/input1
[ 11.008945] ACPI: Power Button (CM) [PBTN]
[ 11.009126] input: Sleep Button (CM) as /class/input/input2
[ 11.009245] ACPI: Sleep Button (CM) [SBTN]
[ 11.009811] ACPI: SSDT 3F6D4172, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 11.010300] ACPI: SSDT 3F6D3F27, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 9.344283] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 9.344528] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.344989] ACPI: SSDT 3F6D4374, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 9.345458] ACPI: SSDT 3F6D40ED, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 11.013089] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 11.013334] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 11.026426] ACPI: Thermal Zone [THM] (28 C)
[ 11.058652] Real Time Clock Driver v1.12ac
[ 11.058939] hpet_resources: 0xfed00000 is busy
[ 11.059729] intel_rng: FWH not detected
[ 11.060385] Linux agpgart interface v0.102
[ 11.060602] agpgart: Detected an Intel 945GM Chipset.
[ 11.061733] agpgart: Detected 7932K stolen memory.
[ 11.077243] agpgart: AGP aperture is 256M @ 0xd0000000
[ 11.077434] [drm] Initialized drm 1.1.0 20060810
[ 11.077555] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 11.077767] intelfb: Version 0.9.4
[ 11.077958] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.078196] intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB
[ 11.081999] intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
[ 11.082268] intelfb: Video mode must be programmed at boot time.
[ 11.085826] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 11.086232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.087046] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.088000] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 11.088546] loop: module loaded
[ 11.088816] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 11.115592] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 11.115771] b44.c:v2.0
[ 11.123801] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:a2:a0:6d
[ 11.123926] PPP generic driver version 2.4.2
[ 11.124114] PPP Deflate Compression module registered
[ 11.124230] PPP BSD Compression module registered
[ 11.124385] PPP MPPE Compression module registered
[ 11.124508] NET: Registered protocol family 24
[ 11.124630] PPPoL2TP kernel driver, V1.0
[ 11.124752] tun: Universal TUN/TAP device driver, 1.6
[ 11.124869] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 11.125108] b43-phy0: Broadcom 4311 WLAN found
[ 11.139426] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
[ 11.139449] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 11.146506] b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config
[ 11.146805] phy0: Selected rate control algorithm 'simple'
[ 11.147326] Driver 'sd' needs updating - please use bus_type methods
[ 11.147486] Driver 'sr' needs updating - please use bus_type methods
[ 11.147715] ata_piix 0000:00:1f.2: version 2.12
[ 11.147721] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 11.147990] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.148250] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 11.148329] scsi0 : ata_piix
[ 11.148522] scsi1 : ata_piix
[ 11.150406] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 11.150528] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 9.701611] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133
[ 9.701733] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 9.708687] ata1.00: configured for UDMA/133
[ 11.699070] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D200, max UDMA/33
[ 11.874774] ata2.00: configured for UDMA/33
[ 10.208177] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5
[ 10.208511] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 10.208650] sd 0:0:0:0: [sda] Write Protect is off
[ 10.208769] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.208786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.209031] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 10.209160] sd 0:0:0:0: [sda] Write Protect is off
[ 10.209278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.209294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.209495] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 10.303680] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.303885] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.307355] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D200 PQ: 0 ANSI: 5
[ 11.995153] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 11.995275] Uniform CD-ROM driver Revision: 3.20
[ 11.995493] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 11.995582] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 11.995765] I2O subsystem v1.325
[ 11.995880] i2o: max drivers = 8
[ 11.996155] Fusion MPT base driver 3.04.06
[ 11.996276] Copyright (c) 1999-2007 LSI Corporation
[ 11.996397] Fusion MPT SPI Host driver 3.04.06
[ 11.996822] ACPI: PCI Interrupt 0000:02:01.4[A] -> GSI 19 (level, low) -> IRQ 19
[ 12.048167] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[efcfd000-efcfd7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 12.050483] ieee1394: raw1394: /dev/raw1394 device initialized
[ 12.050681] Yenta: CardBus bridge found at 0000:02:01.0 [1028:01d4]
[ 12.050822] Yenta O2: res at 0x94/0xD4: 00/ea
[ 12.050938] Yenta O2: enabling read prefetch/write burst
[ 12.173976] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
[ 12.174095] Socket status: 30000006
[ 12.174216] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 12.174417] pcmcia: parent PCI bridge Memory window: 0xefc00000 - 0xefcfffff
[ 12.425694] usbmon: debugfs is not available
[ 12.425862] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 12.426644] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.426650] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.426878] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 12.430973] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.431096] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 12.431106] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 12.440564] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 12.440964] usb usb1: configuration #1 chosen from 1 choice
[ 12.441133] hub 1-0:1.0: USB hub found
[ 12.441253] hub 1-0:1.0: 8 ports detected
[ 12.541511] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.541561] USB Universal Host Controller Interface driver v3.0
[ 12.541752] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 12.541990] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 12.541994] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 12.542165] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 12.542389] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 12.542662] usb usb2: configuration #1 chosen from 1 choice
[ 12.542834] hub 2-0:1.0: USB hub found
[ 12.542952] hub 2-0:1.0: 2 ports detected
[ 12.643385] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 12.643625] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.643629] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.643789] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 12.644015] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 12.644282] usb usb3: configuration #1 chosen from 1 choice
[ 12.644447] hub 3-0:1.0: USB hub found
[ 12.644572] hub 3-0:1.0: 2 ports detected
[ 12.745229] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 12.745470] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 12.745473] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.747847] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 12.748072] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 11.081332] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 12.748489] usb usb4: configuration #1 chosen from 1 choice
[ 12.748653] hub 4-0:1.0: USB hub found
[ 12.748772] hub 4-0:1.0: 2 ports detected
[ 12.849090] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 12.849338] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 12.849341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 12.849505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 12.849734] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 12.850020] usb usb5: configuration #1 chosen from 1 choice
[ 12.850185] hub 5-0:1.0: USB hub found
[ 12.850311] hub 5-0:1.0: 2 ports detected
[ 11.194688] usb 1-2: configuration #1 chosen from 1 choice
[ 11.194976] hub 1-2:1.0: USB hub found
[ 11.195179] hub 1-2:1.0: 4 ports detected
[ 11.638762] ieee1394: Host added: ID:BUS[0-00:1023] GUID[474fc00001ad9c70]
[ 11.761396] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 11.923389] usb 4-2: configuration #1 chosen from 1 choice
[ 13.593641] usbcore: registered new interface driver usblp
[ 13.593763] Initializing USB Mass Storage driver...
[ 13.593927] usbcore: registered new interface driver usb-storage
[ 13.594052] USB Mass Storage support registered.
[ 13.594275] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.930335] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.930462] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.930676] mice: PS/2 mouse device common for all mice
[ 11.944662] input: AT Translated Set 2 keyboard as /class/input/input3
[ 13.622242] i2c /dev entries driver
[ 12.238669] input: PS/2 Mouse as /class/input/input4
[ 12.264504] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[ 13.940947] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 13.941238] device-mapper: multipath: version 1.0.5 loaded
[ 13.941358] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 13.941479] device-mapper: multipath emc: version 0.0.3 loaded
[ 13.941621] device-mapper: multipath rdac: rdac: version 0.4 loaded
[ 13.942001] cpuidle: using governor ladder
[ 14.941499] cpuidle: using governor menu
[ 14.941736] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.293560] input: Logitech USB Receiver as /class/input/input6
[ 13.300380] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 13.300658] usbcore: registered new interface driver usbhid
[ 13.300781] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 13.300972] Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
[ 13.301546] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 13.302350] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.412332] ALSA device list:
[ 13.412463] #0: HDA Intel at 0xefebc000 irq 21
[ 13.412724] oprofile: using NMI interrupt.
[ 13.412849] Netfilter messages via NETLINK v0.30.
[ 13.413003] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 13.413444] ctnetlink v0.93: registering with nfnetlink.
[ 13.413687] GRE over IPv4 tunneling driver
[ 13.414473] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.414613] ClusterIP Version 0.8 loaded successfully
[ 13.414742] arp_tables: (C) 2002 David S. Miller
[ 13.414866] TCP cubic registered
[ 13.414988] NET: Registered protocol family 1
[ 13.415328] NET: Registered protocol family 10
[ 13.417442] IPv6 over IPv4 tunneling driver
[ 13.418366] NET: Registered protocol family 17
[ 13.418769] RPC: Registered udp transport module.
[ 13.418886] RPC: Registered tcp transport module.
[ 13.419003] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.419133] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 13.419334] ieee80211_crypt: registered algorithm 'NULL'
[ 13.419336] ieee80211_crypt: registered algorithm 'WEP'
[ 13.419338] ieee80211_crypt: registered algorithm 'CCMP'
[ 13.419340] ieee80211_crypt: registered algorithm 'TKIP'
[ 13.419855] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 15.159422] kjournald starting. Commit interval 5 seconds
[ 13.492652] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.492674] VFS: Mounted root (ext3 filesystem) readonly.
[ 13.492700] Freeing unused kernel memory: 288k freed
[ 17.084419] EXT3 FS on sda7, internal journal
[ 30.202837] kjournald starting. Commit interval 5 seconds
[ 30.204385] EXT3 FS on dm-0, internal journal
[ 30.204395] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.263485] NTFS volume version 3.1.
[ 30.366837] Adding 2104472k swap on /dev/sda6. Priority:-1 extents:1 across:2104472k
[ 38.773995] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.276760] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 42.276766] b44: eth0: Flow control is off for TX and off for RX.
[ 42.281446] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 45.085594] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 45.976994] b43-phy0 debug: Chip initialized
[ 45.977158] b43-phy0 debug: 32-bit DMA initialized
[ 45.984867] b43-phy0 debug: Wireless interface started
[ 47.673518] b43-phy0 debug: Adding Interface type 2
[ 47.682378] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.716195] eth0: no IPv6 routers present
[ 60.636199] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 60.636280] [drm] Initialized i915 1.6.0 20060119 on minor 0
next prev parent reply other threads:[~2008-04-02 4:28 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-23 11:08 gettimeofday() jumping into the future Michael Smith
2007-08-23 11:36 ` Gerald Britton
2007-08-23 13:03 ` Avi Kivity
2007-08-23 20:09 ` H. Peter Anvin
2007-08-23 20:07 ` H. Peter Anvin
2007-08-23 11:47 ` Peter Zijlstra
2007-08-23 12:20 ` Michael Smith
2007-08-23 18:47 ` john stultz
2007-08-25 16:44 ` Michael Smith
2008-03-30 21:17 ` Tim Ricketts
2008-03-31 7:18 ` Andi Kleen
2008-04-03 11:47 ` James Courtier-Dutton
2008-04-03 12:22 ` James Courtier-Dutton
2008-04-03 12:44 ` James Courtier-Dutton
2008-04-11 23:11 ` john stultz
2008-03-31 8:55 ` Thomas Gleixner
2008-03-31 16:03 ` John Stultz
2008-04-02 11:22 ` Thomas Gleixner
2008-04-02 23:57 ` Karsten Wiese
2008-04-03 6:28 ` Thomas Gleixner
2008-04-02 4:26 ` Mihai Donțu
2008-04-02 4:27 ` Mihai Donțu [this message]
[not found] <47F3F313.7030803@vmware.com>
2008-04-02 22:40 ` Tim Mann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804020727.51985.mihai.dontu@gmail.com \
--to=mihai.dontu@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=msmith@xiph.org \
--cc=tr@earth.li \
--cc=wingo@fluendo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.