From: Dale Farnsworth <dale@farnsworth.org>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 2/9 v2] powerpc: prpmc2800: convert DTS to v1 and add labels
Date: Mon, 7 Apr 2008 11:46:33 -0700 [thread overview]
Message-ID: <20080407184633.GC7438@farnsworth.org> (raw)
In-Reply-To: <20080407183228.GA7438@farnsworth.org>
From: Mark A. Greer <mgreer@mvista.com>
Update the prpmc2800 DTS file to version 1 and add labels.
I verified that there was no change in the resulting dtb file.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
---
arch/powerpc/boot/dts/prpmc2800.dts | 264 +++++++++++++-------------
1 file changed, 134 insertions(+), 130 deletions(-)
Index: linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/dts/prpmc2800.dts
+++ linux-2.6/arch/powerpc/boot/dts/prpmc2800.dts
@@ -11,6 +11,8 @@
* if it can determine the exact PrPMC type.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -25,19 +27,19 @@
PowerPC,7447 {
device_type = "cpu";
reg = <0>;
- clock-frequency = <2bb0b140>; /* Default (733 MHz) */
- bus-frequency = <7f28155>; /* 133.333333 MHz */
- timebase-frequency = <1fca055>; /* 33.333333 MHz */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ clock-frequency = <733000000>; /* Default */
+ bus-frequency = <133333333>;
+ timebase-frequency = <33333333>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
};
};
memory {
device_type = "memory";
- reg = <00000000 20000000>; /* Default (512MB) */
+ reg = <0x0 0x20000000>; /* Default (512MB) */
};
mv64x60@f1000000 { /* Marvell Discovery */
@@ -45,26 +47,26 @@
#size-cells = <1>;
model = "mv64360"; /* Default */
compatible = "mrvl,mv64x60";
- clock-frequency = <7f28155>; /* 133.333333 MHz */
- reg = <f1000000 00010000>;
- virtual-reg = <f1000000>;
- ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
- 80000000 80000000 08000000 /* PCI 0 MEM Space */
- a0000000 a0000000 04000000 /* User FLASH */
- 00000000 f1000000 00010000 /* Bridge's regs */
- f2000000 f2000000 00040000>; /* Integrated SRAM */
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
flash@a0000000 {
device_type = "rom";
compatible = "direct-mapped";
- reg = <a0000000 4000000>; /* Default (64MB) */
+ reg = <0xa0000000 0x4000000>; /* Default (64MB) */
probe-type = "CFI";
bank-width = <4>;
- partitions = <00000000 00100000 /* RO */
- 00100000 00040001 /* RW */
- 00140000 00400000 /* RO */
- 00540000 039c0000 /* RO */
- 03f00000 00100000>; /* RO */
+ partitions = <0x00000000 0x00100000 /* RO */
+ 0x00100000 0x00040001 /* RW */
+ 0x00140000 0x00400000 /* RO */
+ 0x00540000 0x039c0000 /* RO */
+ 0x03f00000 0x00100000>; /* RO */
partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
};
@@ -73,170 +75,170 @@
#size-cells = <0>;
device_type = "mdio";
compatible = "mrvl,mv64x60-mdio";
- ethernet-phy@1 {
+ PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <1>;
};
- ethernet-phy@3 {
+ PHY1: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <3>;
};
};
ethernet@2000 {
- reg = <2000 2000>;
+ reg = <0x2000 0x2000>;
eth0 {
device_type = "network";
compatible = "mrvl,mv64x60-eth";
block-index = <0>;
- interrupts = <20>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@1>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
eth1 {
device_type = "network";
compatible = "mrvl,mv64x60-eth";
block-index = <1>;
- interrupts = <21>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@3>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
};
- sdma@4000 {
+ SDMA0: sdma@4000 {
device_type = "dma";
compatible = "mrvl,mv64x60-sdma";
- reg = <4000 c18>;
- virtual-reg = <f1004000>;
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
interrupt-base = <0>;
- interrupts = <24>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
};
- sdma@6000 {
+ SDMA1: sdma@6000 {
device_type = "dma";
compatible = "mrvl,mv64x60-sdma";
- reg = <6000 c18>;
- virtual-reg = <f1006000>;
+ reg = <0x6000 0xc18>;
+ virtual-reg = <0xf1006000>;
interrupt-base = <0>;
- interrupts = <26>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <38>;
+ interrupt-parent = <&PIC>;
};
- brg@b200 {
+ BRG0: brg@b200 {
compatible = "mrvl,mv64x60-brg";
- reg = <b200 8>;
+ reg = <0xb200 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
+ clock-frequency = <133000000>;
+ current-speed = <9600>;
bcr = <0>;
};
- brg@b208 {
+ BRG1: brg@b208 {
compatible = "mrvl,mv64x60-brg";
- reg = <b208 8>;
+ reg = <0xb208 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
+ clock-frequency = <133000000>;
+ current-speed = <9600>;
bcr = <0>;
};
- cunit@f200 {
- reg = <f200 200>;
+ CUNIT: cunit@f200 {
+ reg = <0xf200 0x200>;
};
- mpscrouting@b400 {
- reg = <b400 c>;
+ MPSCROUTING: mpscrouting@b400 {
+ reg = <0xb400 0xc>;
};
- mpscintr@b800 {
- reg = <b800 100>;
- virtual-reg = <f100b800>;
+ MPSCINTR: mpscintr@b800 {
+ reg = <0xb800 0x100>;
+ virtual-reg = <0xf100b800>;
};
- mpsc@8000 {
+ MPSC0: mpsc@8000 {
device_type = "serial";
compatible = "mrvl,mpsc";
- reg = <8000 38>;
- virtual-reg = <f1008000>;
- sdma = <&/mv64x60/sdma@4000>;
- brg = <&/mv64x60/brg@b200>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
block-index = <0>;
- max_idle = <28>;
+ max_idle = <40>;
chr_1 = <0>;
chr_2 = <0>;
chr_10 = <3>;
mpcr = <0>;
- interrupts = <28>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
};
- mpsc@9000 {
+ MPSC1: mpsc@9000 {
device_type = "serial";
compatible = "mrvl,mpsc";
- reg = <9000 38>;
- virtual-reg = <f1009000>;
- sdma = <&/mv64x60/sdma@6000>;
- brg = <&/mv64x60/brg@b208>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
+ reg = <0x9000 0x38>;
+ virtual-reg = <0xf1009000>;
+ sdma = <&SDMA1>;
+ brg = <&BRG1>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
block-index = <1>;
- max_idle = <28>;
+ max_idle = <40>;
chr_1 = <0>;
chr_2 = <0>;
chr_10 = <3>;
mpcr = <0>;
- interrupts = <2a>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
};
wdt@b410 { /* watchdog timer */
compatible = "mrvl,mv64x60-wdt";
- reg = <b410 8>;
- timeout = <a>; /* wdt timeout in seconds */
+ reg = <0xb410 0x8>;
+ timeout = <10>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
compatible = "mrvl,mv64x60-i2c";
- reg = <c000 20>;
- virtual-reg = <f100c000>;
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
freq_m = <8>;
freq_n = <3>;
- timeout = <3e8>; /* 1000 = 1 second */
+ timeout = <1000>; /* 1000 = 1 second */
retries = <1>;
- interrupts = <25>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
};
- pic {
+ PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
compatible = "mrvl,mv64x60-pic";
- reg = <0000 88>;
+ reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
compatible = "mrvl,mv64x60-mpp";
- reg = <f000 10>;
+ reg = <0xf000 0x10>;
};
gpp@f100 {
compatible = "mrvl,mv64x60-gpp";
- reg = <f100 20>;
+ reg = <0xf100 0x20>;
};
pci@80000000 {
@@ -245,72 +247,74 @@
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mrvl,mv64x60-pci";
- reg = <0cf8 8>;
- ranges = <01000000 0 0 88000000 0 01000000
- 02000000 0 80000000 80000000 0 08000000>;
- bus-range = <0 ff>;
- clock-frequency = <3EF1480>;
- interrupt-pci-iack = <0c34>;
- interrupt-parent = <&/mv64x60/pic>;
- interrupt-map-mask = <f800 0 0 7>;
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0xc34>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
- 5000 0 0 1 &/mv64x60/pic 50
- 5000 0 0 2 &/mv64x60/pic 51
- 5000 0 0 3 &/mv64x60/pic 5b
- 5000 0 0 4 &/mv64x60/pic 5d
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
- 5800 0 0 1 &/mv64x60/pic 5b
- 5800 0 0 2 &/mv64x60/pic 5d
- 5800 0 0 3 &/mv64x60/pic 50
- 5800 0 0 4 &/mv64x60/pic 51
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
- 6000 0 0 1 &/mv64x60/pic 5b
- 6000 0 0 2 &/mv64x60/pic 5d
- 6000 0 0 3 &/mv64x60/pic 50
- 6000 0 0 4 &/mv64x60/pic 51
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
- 6800 0 0 1 &/mv64x60/pic 5d
- 6800 0 0 2 &/mv64x60/pic 50
- 6800 0 0 3 &/mv64x60/pic 51
- 6800 0 0 4 &/mv64x60/pic 5b
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
>;
};
cpu-error@0070 {
compatible = "mrvl,mv64x60-cpu-error";
- reg = <0070 10 0128 28>;
- interrupts = <03>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
compatible = "mrvl,mv64x60-sram-ctrl";
- reg = <0380 80>;
- interrupts = <0d>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
};
pci-error@1d40 {
compatible = "mrvl,mv64x60-pci-error";
- reg = <1d40 40 0c28 4>;
- interrupts = <0c>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
compatible = "mrvl,mv64x60-mem-ctrl";
- reg = <1400 60>;
- interrupts = <11>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
};
};
chosen {
bootargs = "ip=on";
- linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+ linux,stdout-path = &MPSC0;
};
};
next prev parent reply other threads:[~2008-04-07 18:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 18:32 [PATCH 0/9 v2] powerpc: mv64x60 and prpmc2800 DTS cleanups Dale Farnsworth
2008-04-07 18:38 ` [PATCH 1/9 v2] powerpc: change FDT compatible prefix to mrvl Dale Farnsworth
2008-04-07 20:49 ` Segher Boessenkool
2008-04-07 21:53 ` Dale Farnsworth
[not found] ` <20080407210314.GA21993@farnsworth.org>
2008-04-08 6:34 ` Segher Boessenkool
2008-04-07 18:46 ` Dale Farnsworth [this message]
2008-04-07 18:47 ` [PATCH 3/9 v2] powerpc: fix frequencies in prpmc2800.dts Dale Farnsworth
2008-04-07 18:49 ` [PATCH 4/9 v2] powerpc: mv64x60: Fix FDT compatible names: mv64x60 => mv64360 Dale Farnsworth
2008-04-07 18:50 ` [PATCH 5/9 v2] powerpc: mv64x60: remove device tree absolute path references Dale Farnsworth
2008-04-07 18:51 ` [PATCH 6/9 v2] powerpc: prpmc2800: clean up dts properties Dale Farnsworth
2008-04-07 18:53 ` [PATCH 7/9 v2] powerpc: mv643xx_eth: prepare to support multiple silicon blocks Dale Farnsworth
2008-04-07 18:54 ` [PATCH 8/9 v2] powerpc: Document the mv64x60 device tree bindings Dale Farnsworth
2008-04-07 18:55 ` [PATCH 9/9 v2] powerpc: prpmc2800 needs a dtbImage Dale Farnsworth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080407184633.GC7438@farnsworth.org \
--to=dale@farnsworth.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.