From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] ide: always use ->OUTBSYNC method for executing commands
Date: Thu, 10 Apr 2008 22:26:44 +0200 [thread overview]
Message-ID: <200804102226.44209.bzolnier@gmail.com> (raw)
Always use ->OUTBSYNC method for executing commands so the posting is done
if needed (this affects only pmac and scc_pata host drivers at the moment).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-floppy.c | 3 ++-
drivers/ide/ide-io.c | 3 ++-
drivers/ide/ide-iops.c | 2 +-
drivers/ide/ide-probe.c | 6 +++---
drivers/ide/ide-tape.c | 3 ++-
drivers/scsi/ide-scsi.c | 6 ++++--
6 files changed, 14 insertions(+), 9 deletions(-)
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -696,7 +696,8 @@ static ide_startstop_t idefloppy_issue_p
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return (*pkt_xfer_routine) (drive);
}
}
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -502,7 +502,8 @@ static ide_startstop_t ide_atapi_error(i
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);
if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -593,7 +593,7 @@ int ide_driveid_update(ide_drive_t *driv
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -295,7 +295,7 @@ static int actual_try_to_identify (ide_d
hwif->OUTB(0, io_ports->feature_addr);
/* ask drive for ID */
- hwif->OUTB(cmd, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -482,7 +482,7 @@ static int do_probe (ide_drive_t *drive,
msleep(50);
hwif->OUTB(drive->select.all, io_ports->device_addr);
msleep(50);
- hwif->OUTB(WIN_SRST, io_ports->command_addr);
+ hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -518,7 +518,7 @@ static void enable_nest (ide_drive_t *dr
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1056,7 +1056,8 @@ static ide_startstop_t idetape_issue_pc(
IDETAPE_WAIT_CMD, NULL);
return ide_started;
} else {
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return idetape_transfer_pc(drive);
}
}
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -256,7 +256,8 @@ idescsi_atapi_error(ide_drive_t *drive,
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+ hwif->io_ports.command_addr);
rq->errors++;
@@ -573,7 +574,8 @@ static ide_startstop_t idescsi_issue_pc(
return ide_started;
} else {
/* Issue the packet command */
- hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports.command_addr);
return idescsi_transfer_pc(drive);
}
}
reply other threads:[~2008-04-10 20:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804102226.44209.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.