From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Sat, 12 Apr 2008 20:41:11 +0000 Subject: Re: [lm-sensors] D201GLY2 Ubuntu 7.10 fan control Message-Id: <20080412224111.18cde018@hyperion.delvare> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Sun, 13 Apr 2008 01:57:22 +0800, Mini Stac wrote: > pwmconfig was being run with sudo. > echo to pwm1_enable and pwm2_enable results in: > bash: /sys/class/hwmon/hwmon0/device/pwm1_enable: Permission denied > pwm1_enable is set at 2, pwm2_enable 1 Beware of sudo, it doesn't play well with shell output redirection. Please try again (both pwmconfig and the echo tests) without sudo. > > I guess this means its a driver issue? Sensors detect identifies: > Driver `w83627ehf' (should be inserted): > Detects correctly: > * ISA bus, address 0x290 > Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors