From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: kay.sievers@vrfy.org, bzolnier@gmail.com,
dbrownell@users.sourceforge.net, htejun@gmail.com,
jeff@garzik.org
Subject: + ata-ide-fix-platform-driver-hotplug-coldplug.patch added to -mm tree
Date: Sun, 13 Apr 2008 11:24:24 -0700 [thread overview]
Message-ID: <200804131824.m3DIOOXM032369@imap1.linux-foundation.org> (raw)
The patch titled
ATA/IDE: fix platform driver hotplug/coldplug
has been added to the -mm tree. Its filename is
ata-ide-fix-platform-driver-hotplug-coldplug.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: ATA/IDE: fix platform driver hotplug/coldplug
From: Kay Sievers <kay.sievers@vrfy.org>
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable ATA and IDE
platform drivers, to re-enable auto loading.
NOTE: both ata/pata_platform.c and ide/legacy/ide_platform.c claim to provide
"the" platform_pata driver, and there's no build-time mutual exclusion
mechanism. This means that configs which enable both drivers will make some
trouble when hotplugging...
[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/ata/pata_at32.c | 3 +++
drivers/ata/pata_bf54x.c | 1 +
drivers/ata/pata_ixp4xx_cf.c | 1 +
drivers/ata/pata_platform.c | 1 +
drivers/ata/pata_rb500_cf.c | 3 +++
drivers/ata/sata_mv.c | 2 +-
drivers/ide/arm/palm_bk3710.c | 4 ++++
drivers/ide/legacy/ide_platform.c | 2 ++
8 files changed, 16 insertions(+), 1 deletion(-)
diff -puN drivers/ata/pata_at32.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/pata_at32.c
--- a/drivers/ata/pata_at32.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/pata_at32.c
@@ -381,6 +381,9 @@ static int __exit pata_at32_remove(struc
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:at32_ide");
+
static struct platform_driver pata_at32_driver = {
.remove = __exit_p(pata_at32_remove),
.driver = {
diff -puN drivers/ata/pata_bf54x.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/pata_bf54x.c
--- a/drivers/ata/pata_bf54x.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/pata_bf54x.c
@@ -1601,3 +1601,4 @@ MODULE_AUTHOR("Sonic Zhang <sonic.zhang@
MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
diff -puN drivers/ata/pata_ixp4xx_cf.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/pata_ixp4xx_cf.c
--- a/drivers/ata/pata_ixp4xx_cf.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/pata_ixp4xx_cf.c
@@ -221,6 +221,7 @@ MODULE_AUTHOR("Alessandro Zummo <a.zummo
MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
module_init(ixp4xx_pata_init);
module_exit(ixp4xx_pata_exit);
diff -puN drivers/ata/pata_platform.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/pata_platform.c
--- a/drivers/ata/pata_platform.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/pata_platform.c
@@ -277,3 +277,4 @@ MODULE_AUTHOR("Paul Mundt");
MODULE_DESCRIPTION("low-level driver for platform device ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
diff -puN drivers/ata/pata_rb500_cf.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/pata_rb500_cf.c
--- a/drivers/ata/pata_rb500_cf.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/pata_rb500_cf.c
@@ -239,6 +239,9 @@ static __devexit int rb500_pata_driver_r
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" DRV_NAME);
+
static struct platform_driver rb500_pata_platform_driver = {
.probe = rb500_pata_driver_probe,
.remove = __devexit_p(rb500_pata_driver_remove),
diff -puN drivers/ata/sata_mv.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ata/sata_mv.c
--- a/drivers/ata/sata_mv.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ata/sata_mv.c
@@ -3122,7 +3122,7 @@ MODULE_DESCRIPTION("SCSI low-level drive
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-MODULE_ALIAS("platform:sata_mv");
+MODULE_ALIAS("platform:" DRV_NAME);
#ifdef CONFIG_PCI
module_param(msi, int, 0444);
diff -puN drivers/ide/arm/palm_bk3710.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ide/arm/palm_bk3710.c
--- a/drivers/ide/arm/palm_bk3710.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ide/arm/palm_bk3710.c
@@ -409,9 +409,13 @@ out:
return -ENODEV;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:palm_bk3710");
+
static struct platform_driver platform_bk_driver = {
.driver = {
.name = "palm_bk3710",
+ .owner = THIS_MODULE,
},
.probe = palm_bk3710_probe,
.remove = NULL,
diff -puN drivers/ide/legacy/ide_platform.c~ata-ide-fix-platform-driver-hotplug-coldplug drivers/ide/legacy/ide_platform.c
--- a/drivers/ide/legacy/ide_platform.c~ata-ide-fix-platform-driver-hotplug-coldplug
+++ a/drivers/ide/legacy/ide_platform.c
@@ -130,6 +130,7 @@ static int __devexit plat_ide_remove(str
static struct platform_driver platform_ide_driver = {
.driver = {
.name = "pata_platform",
+ .owner = THIS_MODULE,
},
.probe = plat_ide_probe,
.remove = __devexit_p(plat_ide_remove),
@@ -147,6 +148,7 @@ static void __exit platform_ide_exit(voi
MODULE_DESCRIPTION("Platform IDE driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pata_platform");
module_init(platform_ide_init);
module_exit(platform_ide_exit);
_
Patches currently in -mm which might be from kay.sievers@vrfy.org are
mmc-fix-platform-driver-hotplug-coldplug.patch
leds-fix-platform-driver-hotplug-coldplug.patch
misc-fix-platform-driver-hotplug-coldplug.patch
pcmcia-fix-platform-driver-hotplug-coldplug.patch
pm-introduce-new-top-level-suspend-and-hibernation-callbacks-rev-7.patch
pm-introduce-new-top-level-suspend-and-hibernation-callbacks-rev-7-fix.patch
pm-new-suspend-and-hibernation-callbacks-for-platform-bus-type-rev-3.patch
pm-new-suspend-and-hibernation-callbacks-for-pci-bus-type-rev-3.patch
ata-ide-fix-platform-driver-hotplug-coldplug.patch
mm-bdi-export-bdi-attributes-in-sysfs.patch
mm-bdi-export-bdi-attributes-in-sysfs-ia64-fix.patch
infrastructure-to-debug-dynamic-objects.patch
debugobjects-add-documentation.patch
debugobjects-add-timer-specific-object-debugging-code.patch
add-hrtimer-specific-debugobjects-code.patch
cpu-change-cpu_sys_devices-from-array-to-per_cpu-variable.patch
mtd-maps-fix-platform-driver-hotplug-coldplug.patch
mtd-nand-fix-platform-driver-hotplug-coldplug.patch
reply other threads:[~2008-04-13 18:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804131824.m3DIOOXM032369@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bzolnier@gmail.com \
--cc=dbrownell@users.sourceforge.net \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.