From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: kay.sievers@vrfy.org, dbrownell@users.sourceforge.net,
dwmw2@infradead.org
Subject: + mtd-maps-fix-platform-driver-hotplug-coldplug.patch added to -mm tree
Date: Sun, 13 Apr 2008 11:25:39 -0700 [thread overview]
Message-ID: <200804131825.m3DIPddH032397@imap1.linux-foundation.org> (raw)
The patch titled
mtd maps: fix platform driver hotplug/coldplug
has been added to the -mm tree. Its filename is
mtd-maps-fix-platform-driver-hotplug-coldplug.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: mtd maps: fix platform driver hotplug/coldplug
From: Kay Sievers <kay.sievers@vrfy.org>
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable MTD mapping
platform drivers, to re-enable auto loading.
NOTE oddness with physmap ... it's a legacy driver in some configs, which
means it can't always support hotplugging. (Not that most of these mapping
drivers would often be used as modules...)
[dbrownell@users.sourceforge.net: bugfix, more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/mtd/maps/bast-flash.c | 1 +
drivers/mtd/maps/integrator-flash.c | 2 ++
drivers/mtd/maps/ixp2000.c | 3 ++-
drivers/mtd/maps/ixp4xx.c | 2 ++
drivers/mtd/maps/omap_nor.c | 3 ++-
drivers/mtd/maps/physmap.c | 8 ++++++++
drivers/mtd/maps/plat-ram.c | 3 +++
drivers/mtd/maps/sa1100-flash.c | 2 ++
8 files changed, 22 insertions(+), 2 deletions(-)
diff -puN drivers/mtd/maps/bast-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/bast-flash.c
--- a/drivers/mtd/maps/bast-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/bast-flash.c
@@ -223,3 +223,4 @@ module_exit(bast_flash_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("BAST MTD Map driver");
+MODULE_ALIAS("platform:bast-nor");
diff -puN drivers/mtd/maps/integrator-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/integrator-flash.c
--- a/drivers/mtd/maps/integrator-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/integrator-flash.c
@@ -190,6 +190,7 @@ static struct platform_driver armflash_d
.remove = armflash_remove,
.driver = {
.name = "armflash",
+ .owner = THIS_MODULE,
},
};
@@ -209,3 +210,4 @@ module_exit(armflash_exit);
MODULE_AUTHOR("ARM Ltd");
MODULE_DESCRIPTION("ARM Integrator CFI map driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:armflash");
diff -puN drivers/mtd/maps/ixp2000.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/ixp2000.c
--- a/drivers/mtd/maps/ixp2000.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/ixp2000.c
@@ -253,6 +253,7 @@ static struct platform_driver ixp2000_fl
.remove = ixp2000_flash_remove,
.driver = {
.name = "IXP2000-Flash",
+ .owner = THIS_MODULE,
},
};
@@ -270,4 +271,4 @@ module_init(ixp2000_flash_init);
module_exit(ixp2000_flash_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
-
+MODULE_ALIAS("platform:IXP2000-Flash");
diff -puN drivers/mtd/maps/ixp4xx.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/ixp4xx.c
--- a/drivers/mtd/maps/ixp4xx.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/ixp4xx.c
@@ -275,6 +275,7 @@ static struct platform_driver ixp4xx_fla
.remove = ixp4xx_flash_remove,
.driver = {
.name = "IXP4XX-Flash",
+ .owner = THIS_MODULE,
},
};
@@ -295,3 +296,4 @@ module_exit(ixp4xx_flash_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MTD map driver for Intel IXP4xx systems");
MODULE_AUTHOR("Deepak Saxena");
+MODULE_ALIAS("platform:IXP4XX-Flash");
diff -puN drivers/mtd/maps/omap_nor.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/omap_nor.c
--- a/drivers/mtd/maps/omap_nor.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/omap_nor.c
@@ -156,6 +156,7 @@ static struct platform_driver omapflash_
.remove = __devexit_p(omapflash_remove),
.driver = {
.name = "omapflash",
+ .owner = THIS_MODULE,
},
};
@@ -174,4 +175,4 @@ module_exit(omapflash_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MTD NOR map driver for TI OMAP boards");
-
+MODULE_ALIAS("platform:omapflash");
diff -puN drivers/mtd/maps/physmap.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/physmap.c
--- a/drivers/mtd/maps/physmap.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/physmap.c
@@ -242,6 +242,7 @@ static struct platform_driver physmap_fl
.shutdown = physmap_flash_shutdown,
.driver = {
.name = "physmap-flash",
+ .owner = THIS_MODULE,
},
};
@@ -319,3 +320,10 @@ module_exit(physmap_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("Generic configurable MTD map driver");
+
+/* legacy platform drivers can't hotplug or coldplg */
+#ifndef PHYSMAP_COMPAT
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:physmap-flash");
+#endif
+
diff -puN drivers/mtd/maps/plat-ram.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/plat-ram.c
--- a/drivers/mtd/maps/plat-ram.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/plat-ram.c
@@ -251,6 +251,9 @@ static int platram_probe(struct platform
/* device driver info */
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mtd-ram");
+
static struct platform_driver platram_driver = {
.probe = platram_probe,
.remove = platram_remove,
diff -puN drivers/mtd/maps/sa1100-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug drivers/mtd/maps/sa1100-flash.c
--- a/drivers/mtd/maps/sa1100-flash.c~mtd-maps-fix-platform-driver-hotplug-coldplug
+++ a/drivers/mtd/maps/sa1100-flash.c
@@ -456,6 +456,7 @@ static struct platform_driver sa1100_mtd
.shutdown = sa1100_mtd_shutdown,
.driver = {
.name = "flash",
+ .owner = THIS_MODULE,
},
};
@@ -475,3 +476,4 @@ module_exit(sa1100_mtd_exit);
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("SA1100 CFI map driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:flash");
_
Patches currently in -mm which might be from kay.sievers@vrfy.org are
mmc-fix-platform-driver-hotplug-coldplug.patch
leds-fix-platform-driver-hotplug-coldplug.patch
misc-fix-platform-driver-hotplug-coldplug.patch
pcmcia-fix-platform-driver-hotplug-coldplug.patch
pm-introduce-new-top-level-suspend-and-hibernation-callbacks-rev-7.patch
pm-introduce-new-top-level-suspend-and-hibernation-callbacks-rev-7-fix.patch
pm-new-suspend-and-hibernation-callbacks-for-platform-bus-type-rev-3.patch
pm-new-suspend-and-hibernation-callbacks-for-pci-bus-type-rev-3.patch
ata-ide-fix-platform-driver-hotplug-coldplug.patch
mtd-maps-fix-platform-driver-hotplug-coldplug.patch
mtd-nand-fix-platform-driver-hotplug-coldplug.patch
mm-bdi-export-bdi-attributes-in-sysfs.patch
mm-bdi-export-bdi-attributes-in-sysfs-ia64-fix.patch
infrastructure-to-debug-dynamic-objects.patch
debugobjects-add-documentation.patch
debugobjects-add-timer-specific-object-debugging-code.patch
add-hrtimer-specific-debugobjects-code.patch
cpu-change-cpu_sys_devices-from-array-to-per_cpu-variable.patch
reply other threads:[~2008-04-13 18:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804131825.m3DIPddH032397@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=dwmw2@infradead.org \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.