From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: akpm@osdl.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH] tty: The big operations rework
Date: Sun, 13 Apr 2008 18:40:11 +0100 [thread overview]
Message-ID: <20080413184011.7bd2f646@core> (raw)
- Operations are now a shared const function block as with most other
Linux objects
- Introduce wrappers for some optional functions to get consistent
behaviour
- Wrap put_char which used to be patched by the tty layer
- Document which functions are needed/optional
- Make put_char report success/fail
- Cache the driver->ops pointer in the tty as tty->ops
- Remove various surplus lock calls we no longer need
- Remove proc_write method as noted by Alexey Dobriyan
- Introduce some missing sanity checks where certain driver/ldisc
combinations would oops as they didn't check needed methods were present
Signed-off-by: Alan Cox <alan@redhat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/bluetooth/hci_ldisc.c linux-2.6.25-rc8-mm2/drivers/bluetooth/hci_ldisc.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/bluetooth/hci_ldisc.c 2008-04-13 12:55:51.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/bluetooth/hci_ldisc.c 2008-04-13 15:41:16.000000000 +0100
@@ -143,7 +143,7 @@
int len;
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- len = tty->driver->write(tty, skb->data, skb->len);
+ len = tty->ops->write(tty, skb->data, skb->len);
hdev->stat.byte_tx += len;
skb_pull(skb, len);
@@ -190,8 +190,7 @@
/* Flush any pending characters in the driver and discipline. */
tty_ldisc_flush(tty);
- if (tty->driver && tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
hu->proto->flush(hu);
@@ -285,9 +284,7 @@
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
-
- if (tty->driver && tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
return 0;
}
@@ -374,8 +371,8 @@
spin_unlock(&hu->rx_lock);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
- tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
static int hci_uart_register_dev(struct hci_uart *hu)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/ip2/ip2main.c linux-2.6.25-rc8-mm2/drivers/char/ip2/ip2main.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/ip2/ip2main.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/ip2/ip2main.c 2008-04-13 15:52:26.000000000 +0100
@@ -169,7 +169,7 @@
static int ip2_open(PTTY, struct file *);
static void ip2_close(PTTY, struct file *);
static int ip2_write(PTTY, const unsigned char *, int);
-static void ip2_putchar(PTTY, unsigned char);
+static int ip2_putchar(PTTY, unsigned char);
static void ip2_flush_chars(PTTY);
static int ip2_write_room(PTTY);
static int ip2_chars_in_buf(PTTY);
@@ -1616,10 +1616,9 @@
serviceOutgoingFifo ( pCh->pMyBord );
- if ( tty->driver->flush_buffer )
- tty->driver->flush_buffer(tty);
- if ( tty->ldisc.flush_buffer )
- tty->ldisc.flush_buffer(tty);
+ if ( tty->driver->ops->flush_buffer )
+ tty->driver->ops->flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
pCh->pTTY = NULL;
@@ -1738,7 +1737,7 @@
/* */
/* */
/******************************************************************************/
-static void
+static int
ip2_putchar( PTTY tty, unsigned char ch )
{
i2ChanStrPtr pCh = tty->driver_data;
@@ -1746,13 +1745,14 @@
// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
- write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
+ write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
ip2_flush_chars( tty );
} else
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
+ write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
+ return 1;
// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/keyboard.c linux-2.6.25-rc8-mm2/drivers/char/keyboard.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/keyboard.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/keyboard.c 2008-04-13 15:41:03.000000000 +0100
@@ -1230,7 +1230,7 @@
if (rep &&
(!vc_kbd_mode(kbd, VC_REPEAT) ||
- (tty && !L_ECHO(tty) && tty->driver->chars_in_buffer(tty)))) {
+ (tty && !L_ECHO(tty) && tty_chars_in_buffer(tty)))) {
/*
* Don't repeat a key if the input buffers are not empty and the
* characters get aren't echoed locally. This makes key repeat
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_hdlc.c linux-2.6.25-rc8-mm2/drivers/char/n_hdlc.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_hdlc.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/n_hdlc.c 2008-04-13 15:41:03.000000000 +0100
@@ -342,12 +342,10 @@
#endif
/* Flush any pending characters in the driver and discipline. */
-
if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer (tty);
+ tty->ldisc.flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer (tty);
+ tty_driver_flush_buffer(tty);
if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
@@ -399,7 +397,7 @@
/* Send the next block of data to device */
tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
- actual = tty->driver->write(tty, tbuf->buf, tbuf->count);
+ actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
/* rollback was possible and has been done */
if (actual == -ERESTARTSYS) {
@@ -752,8 +750,7 @@
case TIOCOUTQ:
/* get the pending tx byte count in the driver */
- count = tty->driver->chars_in_buffer ?
- tty->driver->chars_in_buffer(tty) : 0;
+ count = tty_chars_in_buffer(tty);
/* add size of next output frame in queue */
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
if (n_hdlc->tx_buf_list.head)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_r3964.c linux-2.6.25-rc8-mm2/drivers/char/n_r3964.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_r3964.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/n_r3964.c 2008-04-13 15:41:02.000000000 +0100
@@ -376,8 +376,9 @@
if (tty == NULL)
return;
- if (tty->driver->put_char) {
- tty->driver->put_char(tty, ch);
+ /* FIXME: put_char should not be called from an IRQ */
+ if (tty->ops->put_char) {
+ tty->ops->put_char(tty, ch);
}
pInfo->bcc ^= ch;
}
@@ -386,12 +387,9 @@
{
struct tty_struct *tty = pInfo->tty;
- if (tty == NULL)
+ if (tty == NULL || tty->ops->flush_chars == NULL)
return;
-
- if (tty->driver->flush_chars) {
- tty->driver->flush_chars(tty);
- }
+ tty->ops->flush_chars(tty);
}
static void trigger_transmit(struct r3964_info *pInfo)
@@ -449,12 +447,11 @@
struct r3964_block_header *pBlock = pInfo->tx_first;
int room = 0;
- if ((tty == NULL) || (pBlock == NULL)) {
+ if (tty == NULL || pBlock == NULL) {
return;
}
- if (tty->driver->write_room)
- room = tty->driver->write_room(tty);
+ room = tty_write_room(tty);
TRACE_PS("transmit_block %p, room %d, length %d",
pBlock, room, pBlock->length);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_tty.c linux-2.6.25-rc8-mm2/drivers/char/n_tty.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/n_tty.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/n_tty.c 2008-04-13 15:41:02.000000000 +0100
@@ -149,8 +149,8 @@
{
if (tty->count &&
test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
- tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
/**
@@ -273,7 +273,7 @@
{
int space, spaces;
- space = tty->driver->write_room(tty);
+ space = tty_write_room(tty);
if (!space)
return -1;
@@ -286,7 +286,7 @@
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->driver->put_char(tty, '\r');
+ tty_put_char(tty, '\r');
tty->column = 0;
}
tty->canon_column = tty->column;
@@ -308,7 +308,7 @@
if (space < spaces)
return -1;
tty->column += spaces;
- tty->driver->write(tty, " ", spaces);
+ tty->ops->write(tty, " ", spaces);
return 0;
}
tty->column += spaces;
@@ -325,7 +325,7 @@
break;
}
}
- tty->driver->put_char(tty, c);
+ tty_put_char(tty, c);
unlock_kernel();
return 0;
}
@@ -352,7 +352,7 @@
int i;
const unsigned char *cp;
- space = tty->driver->write_room(tty);
+ space = tty_write_room(tty);
if (!space)
return 0;
if (nr > space)
@@ -390,28 +390,15 @@
}
}
break_out:
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
- i = tty->driver->write(tty, buf, i);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
+ i = tty->ops->write(tty, buf, i);
unlock_kernel();
return i;
}
/**
- * put_char - write character to driver
- * @c: character (or part of unicode symbol)
- * @tty: terminal device
- *
- * Queue a byte to the driver layer for output
- */
-
-static inline void put_char(unsigned char c, struct tty_struct *tty)
-{
- tty->driver->put_char(tty, c);
-}
-
-/**
* echo_char - echo characters
* @c: unicode byte to echo
* @tty: terminal device
@@ -423,8 +410,8 @@
static void echo_char(unsigned char c, struct tty_struct *tty)
{
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') {
- put_char('^', tty);
- put_char(c ^ 0100, tty);
+ tty_put_char(tty, '^');
+ tty_put_char(tty, c ^ 0100);
tty->column += 2;
} else
opost(c, tty);
@@ -433,7 +420,7 @@
static inline void finish_erasing(struct tty_struct *tty)
{
if (tty->erasing) {
- put_char('/', tty);
+ tty_put_char(tty, '/');
tty->column++;
tty->erasing = 0;
}
@@ -517,7 +504,7 @@
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
if (!tty->erasing) {
- put_char('\\', tty);
+ tty_put_char(tty, '\\');
tty->column++;
tty->erasing = 1;
}
@@ -525,7 +512,7 @@
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- put_char(tty->read_buf[head], tty);
+ tty_put_char(tty, tty->read_buf[head]);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
@@ -553,22 +540,22 @@
/* Now backup to that column. */
while (tty->column > col) {
/* Can't use opost here. */
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- put_char('\b', tty);
- put_char(' ', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
+ tty_put_char(tty, ' ');
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- put_char('\b', tty);
- put_char(' ', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '\b');
+ tty_put_char(tty, ' ');
+ tty_put_char(tty, '\b');
if (tty->column > 0)
tty->column--;
}
@@ -599,8 +586,7 @@
kill_pgrp(tty->pgrp, sig, 1);
if (flush || !L_NOFLSH(tty)) {
n_tty_flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
}
}
@@ -732,7 +718,7 @@
tty->lnext = 0;
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1) {
- put_char('\a', tty); /* beep if no space */
+ tty_put_char(tty, '\a'); /* beep if no space */
return;
}
/* Record the column of first canon char. */
@@ -776,8 +762,7 @@
*/
if (!L_NOFLSH(tty)) {
n_tty_flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
}
if (L_ECHO(tty))
echo_char(c, tty);
@@ -806,8 +791,8 @@
if (L_ECHO(tty)) {
finish_erasing(tty);
if (L_ECHOCTL(tty)) {
- put_char('^', tty);
- put_char('\b', tty);
+ tty_put_char(tty, '^');
+ tty_put_char(tty, '\b');
}
}
return;
@@ -828,7 +813,7 @@
if (c == '\n') {
if (L_ECHO(tty) || L_ECHONL(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1)
- put_char('\a', tty);
+ tty_put_char(tty, '\a');
opost('\n', tty);
}
goto handle_newline;
@@ -846,7 +831,7 @@
*/
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1)
- put_char('\a', tty);
+ tty_put_char(tty, '\a');
/* Record the column of first canon char. */
if (tty->canon_head == tty->read_head)
tty->canon_column = tty->column;
@@ -876,7 +861,7 @@
finish_erasing(tty);
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1) {
- put_char('\a', tty); /* beep if no space */
+ tty_put_char(tty, '\a'); /* beep if no space */
return;
}
if (c == '\n')
@@ -980,8 +965,8 @@
break;
}
}
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
}
n_tty_set_room(tty);
@@ -1000,8 +985,8 @@
if (tty->receive_room < TTY_THRESHOLD_THROTTLE) {
/* check TTY_THROTTLED first so it indicates our state */
if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
- tty->driver->throttle)
- tty->driver->throttle(tty);
+ tty->ops->throttle)
+ tty->ops->throttle(tty);
}
}
@@ -1086,6 +1071,9 @@
tty->real_raw = 0;
}
n_tty_set_room(tty);
+ /* The termios change make the tty ready for I/O */
+ wake_up_interruptible(&tty->write_wait);
+ wake_up_interruptible(&tty->read_wait);
}
/**
@@ -1513,11 +1501,11 @@
break;
b++; nr--;
}
- if (tty->driver->flush_chars)
- tty->driver->flush_chars(tty);
+ if (tty->ops->flush_chars)
+ tty->ops->flush_chars(tty);
} else {
while (nr > 0) {
- c = tty->driver->write(tty, b, nr);
+ c = tty->ops->write(tty, b, nr);
if (c < 0) {
retval = c;
goto break_out;
@@ -1554,11 +1542,6 @@
*
* This code must be sure never to sleep through a hangup.
* Called without the kernel lock held - fine
- *
- * FIXME: if someone changes the VMIN or discipline settings for the
- * terminal while another process is in poll() the poll does not
- * recompute the new limits. Possibly set_termios should issue
- * a read wakeup to fix this bug.
*/
static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
@@ -1582,9 +1565,9 @@
else
tty->minimum_to_wake = 1;
}
- if (!tty_is_writelocked(tty) &&
- tty->driver->chars_in_buffer(tty) < WAKEUP_CHARS &&
- tty->driver->write_room(tty) > 0)
+ if (tty->ops->write && !tty_is_writelocked(tty) &&
+ tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
+ tty_write_room(tty) > 0)
mask |= POLLOUT | POLLWRNORM;
return mask;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/tty_io.c linux-2.6.25-rc8-mm2/drivers/char/tty_io.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/tty_io.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/tty_io.c 2008-04-13 15:41:03.000000000 +0100
@@ -1108,8 +1108,8 @@
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
- if (tty->ldisc.num != o_ldisc.num && tty->driver->set_ldisc)
- tty->driver->set_ldisc(tty);
+ if (tty->ldisc.num != o_ldisc.num && tty->ops->set_ldisc)
+ tty->ops->set_ldisc(tty);
tty_ldisc_put(o_ldisc.num);
@@ -1452,8 +1452,7 @@
/* We may have no line discipline at this point */
if (ld->flush_buffer)
ld->flush_buffer(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
ld->write_wakeup)
ld->write_wakeup(tty);
@@ -1516,11 +1515,11 @@
* So we just call close() the right number of times.
*/
if (cons_filp) {
- if (tty->driver->close)
+ if (tty->ops->close)
for (n = 0; n < closecount; n++)
- tty->driver->close(tty, cons_filp);
- } else if (tty->driver->hangup)
- (tty->driver->hangup)(tty);
+ tty->ops->close(tty, cons_filp);
+ } else if (tty->ops->hangup)
+ (tty->ops->hangup)(tty);
/*
* We don't want to have driver/ldisc interactions beyond
* the ones we did here. The driver layer expects no
@@ -1752,8 +1751,8 @@
wake_up_interruptible(&tty->link->read_wait);
}
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- if (tty->driver->stop)
- (tty->driver->stop)(tty);
+ if (tty->ops->stop)
+ (tty->ops->stop)(tty);
}
EXPORT_SYMBOL(stop_tty);
@@ -1786,8 +1785,8 @@
wake_up_interruptible(&tty->link->read_wait);
}
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- if (tty->driver->start)
- (tty->driver->start)(tty);
+ if (tty->ops->start)
+ (tty->ops->start)(tty);
/* If we have a running line discipline it may need kicking */
tty_wakeup(tty);
}
@@ -1972,10 +1971,13 @@
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
- if (!tty || !tty->driver->write ||
+ if (!tty || !tty->ops->write ||
(test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
-
+ /* Short term debug to catch buggy drivers */
+ if (tty->ops->write_room == NULL)
+ printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
+ tty->driver->name);
ld = tty_ldisc_ref_wait(tty);
if (!ld->write)
ret = -EIO;
@@ -2122,6 +2252,7 @@
goto fail_no_mem;
initialize_tty_struct(tty);
tty->driver = driver;
+ tty->ops = driver->ops;
tty->index = idx;
tty_line_name(driver, idx, tty->name);
@@ -2152,6 +2283,7 @@
goto free_mem_out;
initialize_tty_struct(o_tty);
o_tty->driver = driver->other;
+ o_tty->ops = driver->ops;
o_tty->index = idx;
tty_line_name(driver->other, idx, o_tty->name);
@@ -2456,8 +2588,8 @@
}
}
#endif
- if (tty->driver->close)
- tty->driver->close(tty, filp);
+ if (tty->ops->close)
+ tty->ops->close(tty, filp);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
@@ -2740,8 +2872,8 @@
printk(KERN_DEBUG "opening %s...", tty->name);
#endif
if (!retval) {
- if (tty->driver->open)
- retval = tty->driver->open(tty, filp);
+ if (tty->ops->open)
+ retval = tty->ops->open(tty, filp);
else
retval = -ENODEV;
}
@@ -2840,7 +2972,7 @@
goto out1;
check_tty_count(tty, "tty_open");
- retval = ptm_driver->open(tty, filp);
+ retval = ptm_driver->ops->open(tty, filp);
if (!retval)
return 0;
out1:
@@ -3336,25 +3468,20 @@
static int send_break(struct tty_struct *tty, unsigned int duration)
{
- int retval = -EINTR;
-
- lock_kernel();
if (tty_write_lock(tty, 0) < 0)
- goto out;
- tty->driver->break_ctl(tty, -1);
+ return -EINTR;
+ tty->ops->break_ctl(tty, -1);
if (!signal_pending(current))
msleep_interruptible(duration);
- tty->driver->break_ctl(tty, 0);
+ tty->ops->break_ctl(tty, 0);
tty_write_unlock(tty);
if (!signal_pending(current))
- retval = 0;
-out:
- unlock_kernel();
- return retval;
+ return -EINTR;
+ return 0;
}
/**
- * tiocmget - get modem status
+ * tty_tiocmget - get modem status
* @tty: tty device
* @file: user file pointer
* @p: pointer to result
@@ -3369,10 +3496,8 @@
{
int retval = -EINVAL;
- if (tty->driver->tiocmget) {
- lock_kernel();
- retval = tty->driver->tiocmget(tty, file);
- unlock_kernel();
+ if (tty->ops->tiocmget) {
+ retval = tty->ops->tiocmget(tty, file);
if (retval >= 0)
retval = put_user(retval, p);
@@ -3381,7 +3506,7 @@
}
/**
- * tiocmset - set modem status
+ * tty_tiocmset - set modem status
* @tty: tty device
* @file: user file pointer
* @cmd: command - clear bits, set bits or set all
@@ -3398,7 +3523,7 @@
{
int retval = -EINVAL;
- if (tty->driver->tiocmset) {
+ if (tty->ops->tiocmset) {
unsigned int set, clear, val;
retval = get_user(val, p);
@@ -3422,9 +3547,7 @@
set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
- lock_kernel();
- retval = tty->driver->tiocmset(tty, file, set, clear);
- unlock_kernel();
+ retval = tty->ops->tiocmset(tty, file, set, clear);
}
return retval;
}
@@ -3455,23 +3578,25 @@
retval = -EINVAL;
- if (!tty->driver->break_ctl) {
+ if (!tty->ops->break_ctl) {
switch (cmd) {
case TIOCSBRK:
case TIOCCBRK:
- if (tty->driver->ioctl)
- retval = tty->driver->ioctl(tty, file, cmd, arg);
+ if (tty->ops->ioctl)
+ retval = tty->ops->ioctl(tty, file, cmd, arg);
+ if (retval != -EINVAL && retval != -ENOIOCTLCMD)
+ printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
return retval;
/* These two ioctl's always return success; even if */
/* the driver doesn't support them. */
case TCSBRK:
case TCSBRKP:
- if (!tty->driver->ioctl)
+ if (!tty->ops->ioctl)
return 0;
- lock_kernel();
- retval = tty->driver->ioctl(tty, file, cmd, arg);
- unlock_kernel();
+ retval = tty->ops->ioctl(tty, file, cmd, arg);
+ if (retval != -EINVAL && retval != -ENOIOCTLCMD)
+ printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
if (retval == -ENOIOCTLCMD)
retval = 0;
return retval;
@@ -3491,9 +3616,7 @@
if (retval)
return retval;
if (cmd != TIOCCBRK) {
- lock_kernel();
tty_wait_until_sent(tty, 0);
- unlock_kernel();
if (signal_pending(current))
return -EINTR;
}
@@ -3531,7 +3654,6 @@
case TIOCGSID:
return tiocgsid(tty, real_tty, p);
case TIOCGETD:
- /* FIXME: check this is ok */
return put_user(tty->ldisc.num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
@@ -3543,15 +3665,13 @@
* Break handling
*/
case TIOCSBRK: /* Turn break on, unconditionally */
- lock_kernel();
- tty->driver->break_ctl(tty, -1);
- unlock_kernel();
+ if (tty->ops->break_ctl)
+ tty->ops->break_ctl(tty, -1);
return 0;
case TIOCCBRK: /* Turn break off, unconditionally */
- lock_kernel();
- tty->driver->break_ctl(tty, 0);
- unlock_kernel();
+ if (tty->ops->break_ctl)
+ tty->ops->break_ctl(tty, 0);
return 0;
case TCSBRK: /* SVID version: non-zero arg --> no break */
/* non-zero arg means wait for all output data
@@ -3580,8 +3700,8 @@
}
break;
}
- if (tty->driver->ioctl) {
- retval = (tty->driver->ioctl)(tty, file, cmd, arg);
+ if (tty->ops->ioctl) {
+ retval = (tty->ops->ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
@@ -3608,8 +3728,8 @@
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
- if (tty->driver->compat_ioctl) {
- retval = (tty->driver->compat_ioctl)(tty, file, cmd, arg);
+ if (tty->ops->compat_ioctl) {
+ retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
@@ -3659,8 +3779,7 @@
tty_ldisc_flush(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
read_lock(&tasklist_lock);
/* Kill the entire session */
@@ -3871,15 +3990,27 @@
INIT_WORK(&tty->SAK_work, do_SAK_work);
}
-/*
- * The default put_char routine if the driver did not define one.
+/**
+ * tty_put_char - write one character to a tty
+ * @tty: tty
+ * @ch: character
+ *
+ * Write one byte to the tty using the provided put_char method
+ * if present. Returns the number of characters successfully output.
+ *
+ * Note: the specific put_char operation in the driver layer may go
+ * away soon. Don't call it directly, use this method
*/
-static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
+int tty_put_char(struct tty_struct *tty, unsigned char ch)
{
- tty->driver->write(tty, &ch, 1);
+ if (tty->ops->put_char)
+ return tty->ops->put_char(tty, ch);
+ return tty->ops->write(tty, &ch, 1);
}
+EXPORT_SYMBOL_GPL(tty_put_char);
+
static struct class *tty_class;
/**
@@ -3962,37 +4093,8 @@
void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op)
{
- driver->open = op->open;
- driver->close = op->close;
- driver->write = op->write;
- driver->put_char = op->put_char;
- driver->flush_chars = op->flush_chars;
- driver->write_room = op->write_room;
- driver->chars_in_buffer = op->chars_in_buffer;
- driver->ioctl = op->ioctl;
- driver->compat_ioctl = op->compat_ioctl;
- driver->set_termios = op->set_termios;
- driver->throttle = op->throttle;
- driver->unthrottle = op->unthrottle;
- driver->stop = op->stop;
- driver->start = op->start;
- driver->hangup = op->hangup;
- driver->break_ctl = op->break_ctl;
- driver->flush_buffer = op->flush_buffer;
- driver->set_ldisc = op->set_ldisc;
- driver->wait_until_sent = op->wait_until_sent;
- driver->send_xchar = op->send_xchar;
- driver->read_proc = op->read_proc;
- driver->write_proc = op->write_proc;
- driver->tiocmget = op->tiocmget;
- driver->tiocmset = op->tiocmset;
-#ifdef CONFIG_CONSOLE_POLL
- driver->poll_init = op->poll_init;
- driver->poll_get_char = op->poll_get_char;
- driver->poll_put_char = op->poll_put_char;
-#endif
-}
-
+ driver->ops = op;
+};
EXPORT_SYMBOL(alloc_tty_driver);
EXPORT_SYMBOL(put_tty_driver);
@@ -4055,9 +4157,6 @@
return error;
}
- if (!driver->put_char)
- driver->put_char = tty_default_put_char;
-
mutex_lock(&tty_mutex);
list_add(&driver->tty_drivers, &tty_drivers);
mutex_unlock(&tty_mutex);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/char/tty_ioctl.c linux-2.6.25-rc8-mm2/drivers/char/tty_ioctl.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/char/tty_ioctl.c 2008-04-13 15:36:53.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/char/tty_ioctl.c 2008-04-13 15:54:13.000000000 +0100
@@ -40,6 +40,34 @@
#define TERMIOS_OLD 8
+int tty_chars_in_buffer(struct tty_struct *tty)
+{
+ if (tty->ops->chars_in_buffer)
+ return tty->ops->chars_in_buffer(tty);
+ else
+ return 0;
+}
+
+EXPORT_SYMBOL(tty_chars_in_buffer);
+
+int tty_write_room(struct tty_struct *tty)
+{
+ if (tty->ops->write_room)
+ return tty->ops->write_room(tty);
+ return 2048;
+}
+
+EXPORT_SYMBOL(tty_write_room);
+
+void tty_driver_flush_buffer(struct tty_struct *tty)
+{
+ if (tty->ops->flush_buffer)
+ tty->ops->flush_buffer(tty);
+}
+
+EXPORT_SYMBOL(tty_driver_flush_buffer);
+
+
/**
* tty_wait_until_sent - wait for I/O to finish
* @tty: tty we are waiting for
@@ -58,17 +86,13 @@
printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
#endif
- if (!tty->driver->chars_in_buffer)
- return;
if (!timeout)
timeout = MAX_SCHEDULE_TIMEOUT;
- lock_kernel();
if (wait_event_interruptible_timeout(tty->write_wait,
- !tty->driver->chars_in_buffer(tty), timeout) >= 0) {
- if (tty->driver->wait_until_sent)
- tty->driver->wait_until_sent(tty, timeout);
+ !tty_chars_in_buffer(tty), timeout) >= 0) {
+ if (tty->ops->wait_until_sent)
+ tty->ops->wait_until_sent(tty, timeout);
}
- unlock_kernel();
}
EXPORT_SYMBOL(tty_wait_until_sent);
@@ -396,7 +420,7 @@
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
int canon_change;
- struct ktermios old_termios;
+ struct ktermios old_termios;
struct tty_ldisc *ld;
unsigned long flags;
@@ -444,8 +468,8 @@
}
}
- if (tty->driver->set_termios)
- (*tty->driver->set_termios)(tty, &old_termios);
+ if (tty->ops->set_termios)
+ (*tty->ops->set_termios)(tty, &old_termios);
else
tty_termios_copy_hw(tty->termios, &old_termios);
@@ -748,8 +772,8 @@
{
int was_stopped = tty->stopped;
- if (tty->driver->send_xchar) {
- tty->driver->send_xchar(tty, ch);
+ if (tty->ops->send_xchar) {
+ tty->ops->send_xchar(tty, ch);
return 0;
}
@@ -758,7 +782,7 @@
if (was_stopped)
start_tty(tty);
- tty->driver->write(tty, &ch, 1);
+ tty->ops->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
tty_write_unlock(tty);
@@ -778,13 +802,14 @@
{
int ret = 0;
int bit = arg ? CLOCAL : 0;
- struct ktermios old = *tty->termios;
+ struct ktermios old;
mutex_lock(&tty->termios_mutex);
+ old = *tty->termios;
tty->termios->c_cflag &= ~CLOCAL;
tty->termios->c_cflag |= bit;
- if (tty->driver->set_termios)
- tty->driver->set_termios(tty, &old);
+ if (tty->ops->set_termios)
+ tty->ops->set_termios(tty, &old);
if ((tty->termios->c_cflag & CLOCAL) != bit)
ret = -EINVAL;
mutex_unlock(&tty->termios_mutex);
@@ -926,8 +951,7 @@
ld->flush_buffer(tty);
/* fall through */
case TCOFLUSH:
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
break;
default:
tty_ldisc_deref(ld);
@@ -984,9 +1008,7 @@
case TCFLSH:
return tty_perform_flush(tty, arg);
case TIOCOUTQ:
- return put_user(tty->driver->chars_in_buffer ?
- tty->driver->chars_in_buffer(tty) : 0,
- (int __user *) arg);
+ return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
retval = tty->read_cnt;
if (L_ICANON(tty))
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/input/serio/serport.c linux-2.6.25-rc8-mm2/drivers/input/serio/serport.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/input/serio/serport.c 2008-04-13 12:55:42.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/input/serio/serport.c 2008-04-13 15:39:54.000000000 +0100
@@ -46,7 +46,7 @@
static int serport_serio_write(struct serio *serio, unsigned char data)
{
struct serport *serport = serio->port_data;
- return -(serport->tty->driver->write(serport->tty, &data, 1) != 1);
+ return -(serport->tty->ops->write(serport->tty, &data, 1) != 1);
}
static int serport_serio_open(struct serio *serio)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/isdn/gigaset/ser-gigaset.c linux-2.6.25-rc8-mm2/drivers/isdn/gigaset/ser-gigaset.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/isdn/gigaset/ser-gigaset.c 2008-04-13 12:55:47.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/isdn/gigaset/ser-gigaset.c 2008-04-13 15:40:45.000000000 +0100
@@ -68,10 +68,10 @@
struct tty_struct *tty = cs->hw.ser->tty;
struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
struct sk_buff *skb = bcs->tx_skb;
- int sent;
+ int sent = -EOPNOTSUPP;
if (!tty || !tty->driver || !skb)
- return -EFAULT;
+ return -EINVAL;
if (!skb->len) {
dev_kfree_skb_any(skb);
@@ -80,7 +80,8 @@
}
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- sent = tty->driver->write(tty, skb->data, skb->len);
+ if (tty->ops->write)
+ sent = tty->ops->write(tty, skb->data, skb->len);
gig_dbg(DEBUG_OUTPUT, "write_modem: sent %d", sent);
if (sent < 0) {
/* error */
@@ -120,7 +121,7 @@
if (cb->len) {
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- sent = tty->driver->write(tty, cb->buf + cb->offset, cb->len);
+ sent = tty->ops->write(tty, cb->buf + cb->offset, cb->len);
if (sent < 0) {
/* error */
gig_dbg(DEBUG_OUTPUT, "send_cb: write error %d", sent);
@@ -440,14 +441,14 @@
struct tty_struct *tty = cs->hw.ser->tty;
unsigned int set, clear;
- if (!tty || !tty->driver || !tty->driver->tiocmset)
- return -EFAULT;
+ if (!tty || !tty->driver || !tty->ops->tiocmset)
+ return -EINVAL;
set = new_state & ~old_state;
clear = old_state & ~new_state;
if (!set && !clear)
return 0;
gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
- return tty->driver->tiocmset(tty, NULL, set, clear);
+ return tty->ops->tiocmset(tty, NULL, set, clear);
}
static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/hamradio/6pack.c linux-2.6.25-rc8-mm2/drivers/net/hamradio/6pack.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/hamradio/6pack.c 2008-04-13 12:55:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/hamradio/6pack.c 2008-04-13 15:42:19.000000000 +0100
@@ -148,13 +148,13 @@
if (((sp->status1 & SIXP_DCD_MASK) == 0) && (random < sp->persistence)) {
sp->led_state = 0x70;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
sp->tx_enable = 1;
- actual = sp->tty->driver->write(sp->tty, sp->xbuff, sp->status2);
+ actual = sp->tty->ops->write(sp->tty, sp->xbuff, sp->status2);
sp->xleft -= actual;
sp->xhead += actual;
sp->led_state = 0x60;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
sp->status2 = 0;
} else
mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
@@ -220,13 +220,13 @@
*/
if (sp->duplex == 1) {
sp->led_state = 0x70;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
sp->tx_enable = 1;
- actual = sp->tty->driver->write(sp->tty, sp->xbuff, count);
+ actual = sp->tty->ops->write(sp->tty, sp->xbuff, count);
sp->xleft = count - actual;
sp->xhead = sp->xbuff + actual;
sp->led_state = 0x60;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
} else {
sp->xleft = count;
sp->xhead = sp->xbuff;
@@ -444,7 +444,7 @@
}
if (sp->tx_enable) {
- actual = tty->driver->write(tty, sp->xhead, sp->xleft);
+ actual = tty->ops->write(tty, sp->xhead, sp->xleft);
sp->xleft -= actual;
sp->xhead += actual;
}
@@ -492,8 +492,8 @@
sp_put(sp);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
- && tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ && tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
/*
@@ -554,8 +554,8 @@
/* resync the TNC */
sp->led_state = 0x60;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
- sp->tty->driver->write(sp->tty, &resync_cmd, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &resync_cmd, 1);
/* Start resync timer again -- the TNC might be still absent */
@@ -573,7 +573,7 @@
tnc_set_sync_state(sp, TNC_UNSYNC_STARTUP);
- sp->tty->driver->write(sp->tty, &inbyte, 1);
+ sp->tty->ops->write(sp->tty, &inbyte, 1);
del_timer(&sp->resync_t);
sp->resync_t.data = (unsigned long) sp;
@@ -601,6 +601,8 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
dev = alloc_netdev(sizeof(struct sixpack), "sp%d", sp_setup);
if (!dev) {
@@ -914,9 +916,9 @@
} else { /* output watchdog char if idle */
if ((sp->status2 != 0) && (sp->duplex == 1)) {
sp->led_state = 0x70;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
sp->tx_enable = 1;
- actual = sp->tty->driver->write(sp->tty, sp->xbuff, sp->status2);
+ actual = sp->tty->ops->write(sp->tty, sp->xbuff, sp->status2);
sp->xleft -= actual;
sp->xhead += actual;
sp->led_state = 0x60;
@@ -926,7 +928,7 @@
}
/* needed to trigger the TNC watchdog */
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
/* if the state byte has been received, the TNC is present,
so the resync timer can be reset. */
@@ -956,12 +958,12 @@
if ((sp->status & SIXP_RX_DCD_MASK) ==
SIXP_RX_DCD_MASK) {
sp->led_state = 0x68;
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
}
} else {
sp->led_state = 0x60;
/* fill trailing bytes with zeroes */
- sp->tty->driver->write(sp->tty, &sp->led_state, 1);
+ sp->tty->ops->write(sp->tty, &sp->led_state, 1);
rest = sp->rx_count;
if (rest != 0)
for (i = rest; i <= 3; i++)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/hamradio/mkiss.c linux-2.6.25-rc8-mm2/drivers/net/hamradio/mkiss.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/hamradio/mkiss.c 2008-04-13 12:55:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/hamradio/mkiss.c 2008-04-13 15:42:20.000000000 +0100
@@ -516,7 +516,7 @@
spin_unlock_bh(&ax->buflock);
set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
- actual = ax->tty->driver->write(ax->tty, ax->xbuff, count);
+ actual = ax->tty->ops->write(ax->tty, ax->xbuff, count);
ax->stats.tx_packets++;
ax->stats.tx_bytes += actual;
@@ -546,7 +546,7 @@
}
printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
- (ax->tty->driver->chars_in_buffer(ax->tty) || ax->xleft) ?
+ (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ?
"bad line quality" : "driver error");
ax->xleft = 0;
@@ -736,6 +736,8 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
dev = alloc_netdev(sizeof(struct mkiss), "ax%d", ax_setup);
if (!dev) {
@@ -754,8 +756,7 @@
tty->disc_data = ax;
tty->receive_room = 65535;
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
/* Restore default settings */
dev->type = ARPHRD_AX25;
@@ -936,8 +937,8 @@
mkiss_put(ax);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
- && tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ && tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
/*
@@ -962,7 +963,7 @@
goto out;
}
- actual = tty->driver->write(tty, ax->xhead, ax->xleft);
+ actual = tty->ops->write(tty, ax->xhead, ax->xleft);
ax->xleft -= actual;
ax->xhead += actual;
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/irda/irtty-sir.c linux-2.6.25-rc8-mm2/drivers/net/irda/irtty-sir.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/irda/irtty-sir.c 2008-04-13 12:55:52.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/irda/irtty-sir.c 2008-04-13 15:41:51.000000000 +0100
@@ -64,7 +64,7 @@
IRDA_ASSERT(priv != NULL, return -1;);
IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
- return priv->tty->driver->chars_in_buffer(priv->tty);
+ return tty_chars_in_buffer(priv->tty);
}
/* Wait (sleep) until underlaying hardware finished transmission
@@ -93,10 +93,8 @@
IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;);
tty = priv->tty;
- if (tty->driver->wait_until_sent) {
- lock_kernel();
- tty->driver->wait_until_sent(tty, msecs_to_jiffies(100));
- unlock_kernel();
+ if (tty->ops->wait_until_sent) {
+ tty->ops->wait_until_sent(tty, msecs_to_jiffies(100));
}
else {
msleep(USBSERIAL_TX_DONE_DELAY);
@@ -124,49 +122,15 @@
IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
tty = priv->tty;
-
- lock_kernel();
+
+ mutex_lock(&tty->termios_mutex);
old_termios = *(tty->termios);
cflag = tty->termios->c_cflag;
-
- cflag &= ~CBAUD;
-
- IRDA_DEBUG(2, "%s(), Setting speed to %d\n", __FUNCTION__, speed);
-
- switch (speed) {
- case 1200:
- cflag |= B1200;
- break;
- case 2400:
- cflag |= B2400;
- break;
- case 4800:
- cflag |= B4800;
- break;
- case 19200:
- cflag |= B19200;
- break;
- case 38400:
- cflag |= B38400;
- break;
- case 57600:
- cflag |= B57600;
- break;
- case 115200:
- cflag |= B115200;
- break;
- case 9600:
- default:
- cflag |= B9600;
- break;
- }
-
- tty->termios->c_cflag = cflag;
- if (tty->driver->set_termios)
- tty->driver->set_termios(tty, &old_termios);
- unlock_kernel();
-
+ tty_encode_baud_rate(tty, speed, speed);
+ if (tty->ops->set_termios)
+ tty->ops->set_termios(tty, &old_termios);
priv->io.speed = speed;
+ mutex_unlock(&tty->termios_mutex);
return 0;
}
@@ -202,8 +166,8 @@
* This function is not yet defined for all tty driver, so
* let's be careful... Jean II
*/
- IRDA_ASSERT(priv->tty->driver->tiocmset != NULL, return -1;);
- priv->tty->driver->tiocmset(priv->tty, NULL, set, clear);
+ IRDA_ASSERT(priv->tty->ops->tiocmset != NULL, return -1;);
+ priv->tty->ops->tiocmset(priv->tty, NULL, set, clear);
return 0;
}
@@ -225,17 +189,13 @@
IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -1;);
tty = priv->tty;
- if (!tty->driver->write)
+ if (!tty->ops->write)
return 0;
tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
- if (tty->driver->write_room) {
- writelen = tty->driver->write_room(tty);
- if (writelen > len)
- writelen = len;
- }
- else
+ writelen = tty_write_room(tty);
+ if (writelen > len)
writelen = len;
- return tty->driver->write(tty, ptr, writelen);
+ return tty->ops->write(tty, ptr, writelen);
}
/* ------------------------------------------------------- */
@@ -321,7 +281,7 @@
struct ktermios old_termios;
int cflag;
- lock_kernel();
+ mutex_lock(&tty->termios_mutex);
old_termios = *(tty->termios);
cflag = tty->termios->c_cflag;
@@ -331,9 +291,9 @@
cflag |= CREAD;
tty->termios->c_cflag = cflag;
- if (tty->driver->set_termios)
- tty->driver->set_termios(tty, &old_termios);
- unlock_kernel();
+ if (tty->ops->set_termios)
+ tty->ops->set_termios(tty, &old_termios);
+ mutex_unlock(&tty->termios_mutex);
}
/*****************************************************************/
@@ -359,8 +319,8 @@
tty = priv->tty;
- if (tty->driver->start)
- tty->driver->start(tty);
+ if (tty->ops->start)
+ tty->ops->start(tty);
/* Make sure we can receive more data */
irtty_stop_receiver(tty, FALSE);
@@ -388,8 +348,8 @@
/* Make sure we don't receive more data */
irtty_stop_receiver(tty, TRUE);
- if (tty->driver->stop)
- tty->driver->stop(tty);
+ if (tty->ops->stop)
+ tty->ops->stop(tty);
mutex_unlock(&irtty_mutex);
@@ -483,11 +443,10 @@
/* stop the underlying driver */
irtty_stop_receiver(tty, TRUE);
- if (tty->driver->stop)
- tty->driver->stop(tty);
+ if (tty->ops->stop)
+ tty->ops->stop(tty);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
/* apply mtt override */
sir_tty_drv.qos_mtt_bits = qos_mtt_bits;
@@ -564,8 +523,8 @@
/* Stop tty */
irtty_stop_receiver(tty, TRUE);
tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
- if (tty->driver->stop)
- tty->driver->stop(tty);
+ if (tty->ops->stop)
+ tty->ops->stop(tty);
kfree(priv);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/ppp_async.c linux-2.6.25-rc8-mm2/drivers/net/ppp_async.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/ppp_async.c 2008-04-13 12:55:55.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/ppp_async.c 2008-04-13 15:42:29.000000000 +0100
@@ -158,6 +158,9 @@
struct asyncppp *ap;
int err;
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
err = -ENOMEM;
ap = kzalloc(sizeof(*ap), GFP_KERNEL);
if (!ap)
@@ -359,8 +362,8 @@
tasklet_schedule(&ap->tsk);
ap_put(ap);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
- && tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ && tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
static void
@@ -676,7 +679,7 @@
if (!tty_stuffed && ap->optr < ap->olim) {
avail = ap->olim - ap->optr;
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- sent = tty->driver->write(tty, ap->optr, avail);
+ sent = tty->ops->write(tty, ap->optr, avail);
if (sent < 0)
goto flush; /* error, e.g. loss of CD */
ap->optr += sent;
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/ppp_synctty.c linux-2.6.25-rc8-mm2/drivers/net/ppp_synctty.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/ppp_synctty.c 2008-04-13 12:55:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/ppp_synctty.c 2008-04-13 15:42:21.000000000 +0100
@@ -207,6 +207,9 @@
struct syncppp *ap;
int err;
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
ap = kzalloc(sizeof(*ap), GFP_KERNEL);
err = -ENOMEM;
if (!ap)
@@ -399,8 +402,8 @@
tasklet_schedule(&ap->tsk);
sp_put(ap);
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
- && tty->driver->unthrottle)
- tty->driver->unthrottle(tty);
+ && tty->ops->unthrottle)
+ tty->ops->unthrottle(tty);
}
static void
@@ -653,7 +656,7 @@
tty_stuffed = 0;
if (!tty_stuffed && ap->tpkt) {
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- sent = tty->driver->write(tty, ap->tpkt->data, ap->tpkt->len);
+ sent = tty->ops->write(tty, ap->tpkt->data, ap->tpkt->len);
if (sent < 0)
goto flush; /* error, e.g. loss of CD */
if (sent < ap->tpkt->len) {
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/net/slip.c linux-2.6.25-rc8-mm2/drivers/net/slip.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/net/slip.c 2008-04-13 12:55:52.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/net/slip.c 2008-04-13 15:41:50.000000000 +0100
@@ -396,14 +396,14 @@
/* Order of next two lines is *very* important.
* When we are sending a little amount of data,
- * the transfer may be completed inside driver.write()
+ * the transfer may be completed inside the ops->write()
* routine, because it's running with interrupts enabled.
* In this case we *never* got WRITE_WAKEUP event,
* if we did not request it before write operation.
* 14 Oct 1994 Dmitry Gorodchanin.
*/
sl->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
- actual = sl->tty->driver->write(sl->tty, sl->xbuff, count);
+ actual = sl->tty->ops->write(sl->tty, sl->xbuff, count);
#ifdef SL_CHECK_TRANSMIT
sl->dev->trans_start = jiffies;
#endif
@@ -437,7 +437,7 @@
return;
}
- actual = tty->driver->write(tty, sl->xhead, sl->xleft);
+ actual = tty->ops->write(tty, sl->xhead, sl->xleft);
sl->xleft -= actual;
sl->xhead += actual;
}
@@ -462,7 +462,7 @@
}
printk(KERN_WARNING "%s: transmit timed out, %s?\n",
dev->name,
- (sl->tty->driver->chars_in_buffer(sl->tty) || sl->xleft) ?
+ (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
"bad line quality" : "driver error");
sl->xleft = 0;
sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
@@ -830,6 +830,9 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
/* RTnetlink lock is misused here to serialize concurrent
opens of slip channels. There are better ways, but it is
the simplest one.
@@ -1432,7 +1435,7 @@
/* put END into tty queue. Is it right ??? */
if (!netif_queue_stopped(sl->dev)) {
/* if device busy no outfill */
- sl->tty->driver->write(sl->tty, &s, 1);
+ sl->tty->ops->write(sl->tty, &s, 1);
}
} else
set_bit(SLF_OUTWAIT, &sl->flags);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/serial/serial_core.c linux-2.6.25-rc8-mm2/drivers/serial/serial_core.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/serial/serial_core.c 2008-04-13 15:36:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/serial/serial_core.c 2008-04-13 16:00:06.000000000 +0100
@@ -528,15 +532,25 @@
static int uart_write_room(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ unsigned long flags;
+ int ret;
- return uart_circ_chars_free(&state->info->xmit);
+ spin_lock_irqsave(&state->port->lock, flags);
+ ret = uart_circ_chars_free(&state->info->xmit);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ return ret;
}
static int uart_chars_in_buffer(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ unsigned long flags;
+ int ret;
- return uart_circ_chars_pending(&state->info->xmit);
+ spin_lock_irqsave(&state->port->lock, flags);
+ ret = uart_circ_chars_pending(&state->info->xmit);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ return ret;
}
static void uart_flush_buffer(struct tty_struct *tty)
@@ -618,6 +632,11 @@
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
+
+ /* Ensure the state we copy is consistent and no hardware changes
+ occur as we go */
+ mutex_lock(&state->mutex);
+
tmp.type = port->type;
tmp.line = port->line;
tmp.port = port->iobase;
@@ -637,6 +656,8 @@
tmp.iomem_reg_shift = port->regshift;
tmp.iomem_base = (void *)(unsigned long)port->mapbase;
+ mutex_unlock(&state->mutex);
+
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -914,14 +935,12 @@
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->port;
- lock_kernel();
mutex_lock(&state->mutex);
if (port->type != PORT_UNKNOWN)
port->ops->break_ctl(port, break_state);
mutex_unlock(&state->mutex);
- unlock_kernel();
}
static int uart_do_autoconfig(struct uart_state *state)
@@ -1070,7 +1089,6 @@
int ret = -ENOIOCTLCMD;
- lock_kernel();
/*
* These ioctls don't rely on the hardware to be present.
*/
@@ -1140,10 +1158,9 @@
break;
}
}
- out_up:
+out_up:
mutex_unlock(&state->mutex);
- out:
- unlock_kernel();
+out:
return ret;
}
@@ -1169,7 +1186,6 @@
return;
}
- lock_kernel();
uart_change_speed(state, old_termios);
/* Handle transition to B0 status */
@@ -1202,7 +1218,6 @@
}
spin_unlock_irqrestore(&state->port->lock, flags);
}
- unlock_kernel();
#if 0
/*
* No need to wake up processes in open wait, since they
@@ -1318,11 +1333,11 @@
struct uart_port *port = state->port;
unsigned long char_time, expire;
- BUG_ON(!kernel_locked());
-
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
return;
+ lock_kernel();
+
/*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
@@ -1368,6 +1383,7 @@
break;
}
set_current_state(TASK_RUNNING); /* might not be needed */
+ unlock_kernel();
}
/*
@@ -2081,7 +2097,9 @@
int ret;
uart_change_pm(state, 0);
+ spin_lock_irq(&port->lock);
ops->set_mctrl(port, 0);
+ spin_unlock_irq(&port->lock);
ret = ops->startup(port);
if (ret == 0) {
uart_change_speed(state, NULL);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/digi_acceleport.c linux-2.6.25-rc8-mm2/drivers/usb/serial/digi_acceleport.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/digi_acceleport.c 2008-04-13 15:36:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/usb/serial/digi_acceleport.c 2008-04-13 15:41:15.000000000 +0100
@@ -1427,8 +1427,7 @@
tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
/* flush driver and line discipline buffers */
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
tty_ldisc_flush(tty);
if (port->serial->dev) {
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/usb-serial.c linux-2.6.25-rc8-mm2/drivers/usb/serial/usb-serial.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/usb-serial.c 2008-04-13 15:36:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/usb/serial/usb-serial.c 2008-04-13 15:41:15.000000000 +0100
@@ -296,16 +296,14 @@
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
- if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
+ if (port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->open_count) {
- retval = -EINVAL;
- dbg("%s - port not opened", __func__);
- goto exit;
- }
+ /* open_count is managed under the mutex lock for the tty so cannot
+ drop to zero until after the last close completes */
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(port, buf, count);
@@ -317,61 +315,28 @@
static int serial_write_room (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
-
- if (!port)
- goto exit;
-
dbg("%s - port %d", __func__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- goto exit;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
- retval = port->serial->type->write_room(port);
-
-exit:
- return retval;
+ return port->serial->type->write_room(port);
}
static int serial_chars_in_buffer (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
-
- if (!port)
- goto exit;
-
dbg("%s = port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- goto exit;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
- retval = port->serial->type->chars_in_buffer(port);
-
-exit:
- return retval;
+ return port->serial->type->chars_in_buffer(port);
}
static void serial_throttle (struct tty_struct * tty)
{
struct usb_serial_port *port = tty->driver_data;
-
- if (!port)
- return;
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg ("%s - port not open", __func__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
if (port->serial->type->throttle)
port->serial->type->throttle(port);
@@ -380,17 +345,9 @@
static void serial_unthrottle (struct tty_struct * tty)
{
struct usb_serial_port *port = tty->driver_data;
-
- if (!port)
- return;
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
if (port->serial->type->unthrottle)
port->serial->type->unthrottle(port);
@@ -401,42 +358,27 @@
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
- lock_kernel();
- if (!port)
- goto exit;
-
dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
- /* Caution - port->open_count is BKL protected */
- if (!port->open_count) {
- dbg ("%s - port not open", __func__);
- goto exit;
- }
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
- if (port->serial->type->ioctl)
+ if (port->serial->type->ioctl) {
+ lock_kernel();
retval = port->serial->type->ioctl(port, file, cmd, arg);
+ unlock_kernel();
+ }
else
retval = -ENOIOCTLCMD;
-exit:
- unlock_kernel();
return retval;
}
static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
{
struct usb_serial_port *port = tty->driver_data;
-
- if (!port)
- return;
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
if (port->serial->type->set_termios)
port->serial->type->set_termios(port, old);
@@ -448,24 +390,15 @@
{
struct usb_serial_port *port = tty->driver_data;
- lock_kernel();
- if (!port) {
- unlock_kernel();
- return;
- }
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- unlock_kernel();
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
- if (port->serial->type->break_ctl)
+ if (port->serial->type->break_ctl) {
+ lock_kernel();
port->serial->type->break_ctl(port, break_state);
- unlock_kernel();
+ unlock_kernel();
+ }
}
static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
@@ -519,19 +452,11 @@
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return -ENODEV;
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- return -ENODEV;
- }
-
+ WARN_ON(!port->open_count);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(port, file);
-
return -EINVAL;
}
@@ -540,19 +465,11 @@
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return -ENODEV;
-
dbg("%s - port %d", __func__, port->number);
- if (!port->open_count) {
- dbg("%s - port not open", __func__);
- return -ENODEV;
- }
-
+ WARN_ON(!port->open_count);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(port, file, set, clear);
-
return -EINVAL;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/whiteheat.c linux-2.6.25-rc8-mm2/drivers/usb/serial/whiteheat.c
--- linux.vanilla-2.6.25-rc8-mm2/drivers/usb/serial/whiteheat.c 2008-04-13 15:36:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/drivers/usb/serial/whiteheat.c 2008-04-13 15:41:14.000000000 +0100
@@ -679,15 +679,13 @@
}
*/
- if (port->tty->driver->flush_buffer)
- port->tty->driver->flush_buffer(port->tty);
+ tty_driver_flush_buffer(port->tty);
tty_ldisc_flush(port->tty);
firm_report_tx_done(port);
firm_close(port);
-printk(KERN_ERR"Before processing rx_urbs_submitted.\n");
/* shutdown our bulk reads and writes */
mutex_lock(&info->deathwarrant);
spin_lock_irq(&info->lock);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/fs/proc/proc_tty.c linux-2.6.25-rc8-mm2/fs/proc/proc_tty.c
--- linux.vanilla-2.6.25-rc8-mm2/fs/proc/proc_tty.c 2008-04-13 15:36:54.000000000 +0100
+++ linux-2.6.25-rc8-mm2/fs/proc/proc_tty.c 2008-04-13 15:38:54.000000000 +0100
@@ -177,16 +177,14 @@
{
struct proc_dir_entry *ent;
- if ((!driver->read_proc && !driver->write_proc) ||
- !driver->driver_name ||
+ if (!driver->ops->read_proc || !driver->driver_name ||
driver->proc_entry)
return;
ent = create_proc_entry(driver->driver_name, 0, proc_tty_driver);
if (!ent)
return;
- ent->read_proc = driver->read_proc;
- ent->write_proc = driver->write_proc;
+ ent->read_proc = driver->ops->read_proc;
ent->owner = driver->owner;
ent->data = driver;
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/include/linux/tty_driver.h linux-2.6.25-rc8-mm2/include/linux/tty_driver.h
--- linux.vanilla-2.6.25-rc8-mm2/include/linux/tty_driver.h 2008-04-13 15:36:55.000000000 +0100
+++ linux-2.6.25-rc8-mm2/include/linux/tty_driver.h 2008-04-13 15:38:55.000000000 +0100
@@ -12,11 +12,15 @@
* This routine is called when a particular tty device is opened.
* This routine is mandatory; if this routine is not filled in,
* the attempted open will fail with ENODEV.
+ *
+ * Required method.
*
* void (*close)(struct tty_struct * tty, struct file * filp);
*
* This routine is called when a particular tty device is closed.
*
+ * Required method.
+ *
* int (*write)(struct tty_struct * tty,
* const unsigned char *buf, int count);
*
@@ -26,7 +30,9 @@
* number of characters actually accepted for writing. This
* routine is mandatory.
*
- * void (*put_char)(struct tty_struct *tty, unsigned char ch);
+ * Optional: Required for writable devices.
+ *
+ * int (*put_char)(struct tty_struct *tty, unsigned char ch);
*
* This routine is called by the kernel to write a single
* character to the tty device. If the kernel uses this routine,
@@ -34,10 +40,18 @@
* done stuffing characters into the driver. If there is no room
* in the queue, the character is ignored.
*
+ * Optional: Kernel will use the write method if not provided.
+ *
+ * Note: Do not call this function directly, call tty_put_char
+ *
* void (*flush_chars)(struct tty_struct *tty);
*
* This routine is called by the kernel after it has written a
* series of characters to the tty device using put_char().
+ *
+ * Optional:
+ *
+ * Note: Do not call this function directly, call tty_driver_flush_chars
*
* int (*write_room)(struct tty_struct *tty);
*
@@ -45,6 +59,10 @@
* will accept for queuing to be written. This number is subject
* to change as output buffers get emptied, or if the output flow
* control is acted.
+ *
+ * Required if write method is provided else not needed.
+ *
+ * Note: Do not call this function directly, call tty_write_room
*
* int (*ioctl)(struct tty_struct *tty, struct file * file,
* unsigned int cmd, unsigned long arg);
@@ -53,22 +71,29 @@
* device-specific ioctl's. If the ioctl number passed in cmd
* is not recognized by the driver, it should return ENOIOCTLCMD.
*
+ * Optional
+ *
* long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
* unsigned int cmd, unsigned long arg);
*
* implement ioctl processing for 32 bit process on 64 bit system
+ *
+ * Optional
*
* void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
* This routine allows the tty driver to be notified when
- * device's termios settings have changed. Note that a
- * well-designed tty driver should be prepared to accept the case
- * where old == NULL, and try to do something rational.
+ * device's termios settings have changed.
+ *
+ * Optional: Called under the termios lock
+ *
*
* void (*set_ldisc)(struct tty_struct *tty);
*
* This routine allows the tty driver to be notified when the
* device's termios settings have changed.
+ *
+ * Optional: Called under BKL (currently)
*
* void (*throttle)(struct tty_struct * tty);
*
@@ -86,17 +111,27 @@
*
* This routine notifies the tty driver that it should stop
* outputting characters to the tty device.
+ *
+ * Optional:
+ *
+ * Note: Call stop_tty not this method.
*
* void (*start)(struct tty_struct *tty);
*
* This routine notifies the tty driver that it resume sending
* characters to the tty device.
+ *
+ * Optional:
+ *
+ * Note: Call start_tty not this method.
*
* void (*hangup)(struct tty_struct *tty);
*
* This routine notifies the tty driver that it should hangup the
* tty device.
*
+ * Required:
+ *
* void (*break_ctl)(struct tty_stuct *tty, int state);
*
* This optional routine requests the tty driver to turn on or
@@ -106,18 +141,26 @@
*
* If this routine is implemented, the high-level tty driver will
* handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
- * TIOCCBRK. Otherwise, these ioctls will be passed down to the
- * driver to handle.
+ * TIOCCBRK.
+ *
+ * Optional: Required for TCSBRK/BRKP/etc handling.
*
* void (*wait_until_sent)(struct tty_struct *tty, int timeout);
*
* This routine waits until the device has written out all of the
* characters in its transmitter FIFO.
*
+ * Optional: If not provided the device is assumed to have no FIFO
+ *
+ * Note: Usually correct to call tty_wait_until_sent
+ *
* void (*send_xchar)(struct tty_struct *tty, char ch);
*
* This routine is used to send a high-priority XON/XOFF
* character to the device.
+ *
+ * Optional: If not provided then the write method is called under
+ * the atomic write lock to keep it serialized with the ldisc.
*/
#include <linux/fs.h>
@@ -126,12 +169,13 @@
struct tty_struct;
struct tty_driver;
struct tty_operations {
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
int (*write)(struct tty_struct * tty,
const unsigned char *buf, int count);
- void (*put_char)(struct tty_struct *tty, unsigned char ch);
+ int (*put_char)(struct tty_struct *tty, unsigned char ch);
void (*flush_chars)(struct tty_struct *tty);
int (*write_room)(struct tty_struct *tty);
int (*chars_in_buffer)(struct tty_struct *tty);
@@ -153,8 +197,6 @@
void (*send_xchar)(struct tty_struct *tty, char ch);
int (*read_proc)(char *page, char **start, off_t off,
int count, int *eof, void *data);
- int (*write_proc)(struct file *file, const char __user *buffer,
- unsigned long count, void *data);
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
@@ -190,48 +234,13 @@
struct tty_struct **ttys;
struct ktermios **termios;
struct ktermios **termios_locked;
- void *driver_state; /* only used for the PTY driver */
-
+ void *driver_state;
+
/*
- * Interface routines from the upper tty layer to the tty
- * driver. Will be replaced with struct tty_operations.
+ * Driver methods
*/
- int (*open)(struct tty_struct * tty, struct file * filp);
- void (*close)(struct tty_struct * tty, struct file * filp);
- int (*write)(struct tty_struct * tty,
- const unsigned char *buf, int count);
- void (*put_char)(struct tty_struct *tty, unsigned char ch);
- void (*flush_chars)(struct tty_struct *tty);
- int (*write_room)(struct tty_struct *tty);
- int (*chars_in_buffer)(struct tty_struct *tty);
- int (*ioctl)(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg);
- long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg);
- void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
- void (*throttle)(struct tty_struct * tty);
- void (*unthrottle)(struct tty_struct * tty);
- void (*stop)(struct tty_struct *tty);
- void (*start)(struct tty_struct *tty);
- void (*hangup)(struct tty_struct *tty);
- void (*break_ctl)(struct tty_struct *tty, int state);
- void (*flush_buffer)(struct tty_struct *tty);
- void (*set_ldisc)(struct tty_struct *tty);
- void (*wait_until_sent)(struct tty_struct *tty, int timeout);
- void (*send_xchar)(struct tty_struct *tty, char ch);
- int (*read_proc)(char *page, char **start, off_t off,
- int count, int *eof, void *data);
- int (*write_proc)(struct file *file, const char __user *buffer,
- unsigned long count, void *data);
- int (*tiocmget)(struct tty_struct *tty, struct file *file);
- int (*tiocmset)(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear);
-#ifdef CONFIG_CONSOLE_POLL
- int (*poll_init)(struct tty_driver *driver, int line, char *options);
- int (*poll_get_char)(struct tty_driver *driver, int line);
- void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
-#endif
+ const struct tty_operations *ops;
struct list_head tty_drivers;
};
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/include/linux/tty.h linux-2.6.25-rc8-mm2/include/linux/tty.h
--- linux.vanilla-2.6.25-rc8-mm2/include/linux/tty.h 2008-04-13 15:36:55.000000000 +0100
+++ linux-2.6.25-rc8-mm2/include/linux/tty.h 2008-04-13 15:38:55.000000000 +0100
@@ -177,9 +194,13 @@
* size each time the window is created or resized anyway.
* - TYT, 9/14/92
*/
+
+struct tty_operations;
+
struct tty_struct {
int magic;
struct tty_driver *driver;
+ const struct tty_operations *ops;
int index;
struct tty_ldisc ldisc;
struct mutex termios_mutex;
@@ -295,6 +317,10 @@
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
int buflen);
extern void tty_write_message(struct tty_struct *tty, char *msg);
+extern int tty_put_char(struct tty_struct *tty, unsigned char c);
+extern int tty_chars_in_buffer(struct tty_struct *tty);
+extern int tty_write_room(struct tty_struct *tty);
+extern void tty_driver_flush_buffer(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/kernel/printk.c linux-2.6.25-rc8-mm2/kernel/printk.c
--- linux.vanilla-2.6.25-rc8-mm2/kernel/printk.c 2008-04-13 15:36:55.000000000 +0100
+++ linux-2.6.25-rc8-mm2/kernel/printk.c 2008-04-13 16:06:02.000000000 +0100
@@ -1304,8 +1304,8 @@
*/
void tty_write_message(struct tty_struct *tty, char *msg)
{
- if (tty && tty->driver->write)
- tty->driver->write(tty, msg, strlen(msg));
+ if (tty && tty->ops->write)
+ tty->ops->write(tty, msg, strlen(msg));
return;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.25-rc8-mm2/net/irda/ircomm/ircomm_tty.c linux-2.6.25-rc8-mm2/net/irda/ircomm/ircomm_tty.c
--- linux.vanilla-2.6.25-rc8-mm2/net/irda/ircomm/ircomm_tty.c 2008-04-13 15:36:55.000000000 +0100
+++ linux-2.6.25-rc8-mm2/net/irda/ircomm/ircomm_tty.c 2008-04-13 15:43:03.000000000 +0100
@@ -555,10 +555,8 @@
ircomm_tty_shutdown(self);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
self->tty = NULL;
next reply other threads:[~2008-04-13 17:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-13 17:40 Alan Cox [this message]
2008-04-15 5:37 ` [PATCH] tty: The big operations rework Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080413184011.7bd2f646@core \
--to=alan@lxorguk.ukuu.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.