From: Chandra Seetharaman <sekharan@us.ibm.com>
To: dm-devel@redhat.com, linux-scsi@vger.kernel.org
Cc: andmike@us.ibm.com, michaelc@cs.wisc.edu, asson_ronald@emc.com,
James.Bottomley@HansenPartnership.com, Benoit_Arthur@emc.com,
jens.axboe@oracle.com, agk@redhat.com
Subject: [PATCH 2/7] scsi_dh: add lsi rdac device handler
Date: Tue, 15 Apr 2008 18:18:30 -0700 [thread overview]
Message-ID: <20080416011830.19580.27485.sendpatchset@chandra-ubuntu> (raw)
In-Reply-To: <20080416011818.19580.41106.sendpatchset@chandra-ubuntu>
Subject: scsi_dh: add lsi rdac device handler
From: Chandra Seetharaman <sekharan@us.ibm.com>
add LSI RDAC SCSI device handler
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
---
drivers/scsi/device_handler/Kconfig | 6 6 + 0 - 0 !
drivers/scsi/device_handler/Makefile | 1 1 + 0 - 0 !
drivers/scsi/device_handler/scsi_dh_rdac.c | 678 678 + 0 - 0 !
3 files changed, 685 insertions(+)
Index: linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/Kconfig
===================================================================
--- linux-2.6.25-rc8-mm2.orig/drivers/scsi/device_handler/Kconfig
+++ linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/Kconfig
@@ -10,3 +10,9 @@ menuconfig SCSI_DH
SCSI Device Handlers provide device specific support for
devices utilized in multipath configurations. Say Y here to
select support for specific hardware.
+
+config SCSI_DH_RDAC
+ tristate "LSI RDAC Device Handler"
+ depends on SCSI_DH
+ help
+ If you have a LSI RDAC select y. Otherwise, say N.
Index: linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/scsi_dh_rdac.c
===================================================================
--- /dev/null
+++ linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -0,0 +1,678 @@
+/*
+ * Engenio/LSI RDAC SCSI Device Handler
+ *
+ * Copyright (C) 2005 Mike Christie. All rights reserved.
+ * Copyright (C) Chandra Seetharaman, IBM Corp. 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dh.h>
+
+#define RDAC_NAME "rdac"
+
+/*
+ * LSI mode page stuff
+ *
+ * These struct definitions and the forming of the
+ * mode page were taken from the LSI RDAC 2.4 GPL'd
+ * driver, and then converted to Linux conventions.
+ */
+#define RDAC_QUIESCENCE_TIME 20;
+/*
+ * Page Codes
+ */
+#define RDAC_PAGE_CODE_REDUNDANT_CONTROLLER 0x2c
+
+/*
+ * Controller modes definitions
+ */
+#define RDAC_MODE_TRANSFER_SPECIFIED_LUNS 0x02
+
+/*
+ * RDAC Options field
+ */
+#define RDAC_FORCED_QUIESENCE 0x02
+
+#define RDAC_TIMEOUT (60 * HZ)
+#define RDAC_RETRIES 3
+
+struct rdac_mode_6_hdr {
+ u8 data_len;
+ u8 medium_type;
+ u8 device_params;
+ u8 block_desc_len;
+};
+
+struct rdac_mode_10_hdr {
+ u16 data_len;
+ u8 medium_type;
+ u8 device_params;
+ u16 reserved;
+ u16 block_desc_len;
+};
+
+struct rdac_mode_common {
+ u8 controller_serial[16];
+ u8 alt_controller_serial[16];
+ u8 rdac_mode[2];
+ u8 alt_rdac_mode[2];
+ u8 quiescence_timeout;
+ u8 rdac_options;
+};
+
+struct rdac_pg_legacy {
+ struct rdac_mode_6_hdr hdr;
+ u8 page_code;
+ u8 page_len;
+ struct rdac_mode_common common;
+#define MODE6_MAX_LUN 32
+ u8 lun_table[MODE6_MAX_LUN];
+ u8 reserved2[32];
+ u8 reserved3;
+ u8 reserved4;
+};
+
+struct rdac_pg_expanded {
+ struct rdac_mode_10_hdr hdr;
+ u8 page_code;
+ u8 subpage_code;
+ u8 page_len[2];
+ struct rdac_mode_common common;
+ u8 lun_table[256];
+ u8 reserved3;
+ u8 reserved4;
+};
+
+struct c9_inquiry {
+ u8 peripheral_info;
+ u8 page_code; /* 0xC9 */
+ u8 reserved1;
+ u8 page_len;
+ u8 page_id[4]; /* "vace" */
+ u8 avte_cvp;
+ u8 path_prio;
+ u8 reserved2[38];
+};
+
+#define SUBSYS_ID_LEN 16
+#define SLOT_ID_LEN 2
+
+struct c4_inquiry {
+ u8 peripheral_info;
+ u8 page_code; /* 0xC4 */
+ u8 reserved1;
+ u8 page_len;
+ u8 page_id[4]; /* "subs" */
+ u8 subsys_id[SUBSYS_ID_LEN];
+ u8 revision[4];
+ u8 slot_id[SLOT_ID_LEN];
+ u8 reserved[2];
+};
+
+struct rdac_controller {
+ u8 subsys_id[SUBSYS_ID_LEN];
+ u8 slot_id[SLOT_ID_LEN];
+ int use_ms10;
+ struct kref kref;
+ struct list_head node; /* list of all controllers */
+ union {
+ struct rdac_pg_legacy legacy;
+ struct rdac_pg_expanded expanded;
+ } mode_select;
+};
+struct c8_inquiry {
+ u8 peripheral_info;
+ u8 page_code; /* 0xC8 */
+ u8 reserved1;
+ u8 page_len;
+ u8 page_id[4]; /* "edid" */
+ u8 reserved2[3];
+ u8 vol_uniq_id_len;
+ u8 vol_uniq_id[16];
+ u8 vol_user_label_len;
+ u8 vol_user_label[60];
+ u8 array_uniq_id_len;
+ u8 array_unique_id[16];
+ u8 array_user_label_len;
+ u8 array_user_label[60];
+ u8 lun[8];
+};
+
+struct c2_inquiry {
+ u8 peripheral_info;
+ u8 page_code; /* 0xC2 */
+ u8 reserved1;
+ u8 page_len;
+ u8 page_id[4]; /* "swr4" */
+ u8 sw_version[3];
+ u8 sw_date[3];
+ u8 features_enabled;
+ u8 max_lun_supported;
+ u8 partitions[239]; /* Total allocation length should be 0xFF */
+};
+
+struct rdac_dh_data {
+ struct rdac_controller *ctlr;
+#define UNINITIALIZED_LUN (1 << 8)
+ unsigned lun;
+#define RDAC_STATE_ACTIVE 0
+#define RDAC_STATE_PASSIVE 1
+ unsigned char state;
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+ union {
+ struct c2_inquiry c2;
+ struct c4_inquiry c4;
+ struct c8_inquiry c8;
+ struct c9_inquiry c9;
+ } inq;
+};
+
+static LIST_HEAD(ctlr_list);
+static DEFINE_SPINLOCK(list_lock);
+
+static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
+{
+ struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
+ BUG_ON(scsi_dh_data == NULL);
+ return ((struct rdac_dh_data *) scsi_dh_data->buf);
+}
+
+static struct request *get_rdac_req(struct scsi_device *sdev,
+ void *buffer, unsigned buflen, int rw)
+{
+ struct request *rq;
+ struct request_queue *q = sdev->request_queue;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ rq = blk_get_request(q, rw, GFP_KERNEL);
+
+ if (!rq) {
+ sdev_printk(KERN_INFO, sdev,
+ "get_rdac_req: blk_get_request failed.\n");
+ return NULL;
+ }
+
+ if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) {
+ blk_put_request(rq);
+ sdev_printk(KERN_INFO, sdev,
+ "get_rdac_req: blk_rq_map_kern failed.\n");
+ return NULL;
+ }
+
+ memset(&rq->cmd, 0, BLK_MAX_CDB);
+ rq->sense = h->sense;
+ memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ rq->sense_len = 0;
+
+ rq->cmd_type = REQ_TYPE_BLOCK_PC;
+ rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
+ rq->retries = RDAC_RETRIES;
+ rq->timeout = RDAC_TIMEOUT;
+
+ return rq;
+}
+
+static struct request *rdac_failover_get(struct scsi_device *sdev)
+{
+ struct request *rq;
+ struct rdac_mode_common *common;
+ unsigned data_size;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ if (h->ctlr->use_ms10) {
+ struct rdac_pg_expanded *rdac_pg;
+
+ data_size = sizeof(struct rdac_pg_expanded);
+ rdac_pg = &h->ctlr->mode_select.expanded;
+ memset(rdac_pg, 0, data_size);
+ common = &rdac_pg->common;
+ rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER + 0x40;
+ rdac_pg->subpage_code = 0x1;
+ rdac_pg->page_len[0] = 0x01;
+ rdac_pg->page_len[1] = 0x28;
+ rdac_pg->lun_table[h->lun] = 0x81;
+ } else {
+ struct rdac_pg_legacy *rdac_pg;
+
+ data_size = sizeof(struct rdac_pg_legacy);
+ rdac_pg = &h->ctlr->mode_select.legacy;
+ memset(rdac_pg, 0, data_size);
+ common = &rdac_pg->common;
+ rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
+ rdac_pg->page_len = 0x68;
+ rdac_pg->lun_table[h->lun] = 0x81;
+ }
+ common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
+ common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
+ common->rdac_options = RDAC_FORCED_QUIESENCE;
+
+ /* get request for block layer packet command */
+ rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE);
+ if (!rq)
+ return NULL;
+
+ /* Prepare the command. */
+ if (h->ctlr->use_ms10) {
+ rq->cmd[0] = MODE_SELECT_10;
+ rq->cmd[7] = data_size >> 8;
+ rq->cmd[8] = data_size & 0xff;
+ } else {
+ rq->cmd[0] = MODE_SELECT;
+ rq->cmd[4] = data_size;
+ }
+ rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
+
+ return rq;
+}
+
+static void release_controller(struct kref *kref)
+{
+ struct rdac_controller *ctlr;
+ ctlr = container_of(kref, struct rdac_controller, kref);
+
+ spin_lock(&list_lock);
+ list_del(&ctlr->node);
+ spin_unlock(&list_lock);
+ kfree(ctlr);
+}
+
+static struct rdac_controller *get_controller(u8 *subsys_id, u8 *slot_id)
+{
+ struct rdac_controller *ctlr, *tmp;
+
+ spin_lock(&list_lock);
+
+ list_for_each_entry(tmp, &ctlr_list, node) {
+ if ((memcmp(tmp->subsys_id, subsys_id, SUBSYS_ID_LEN) == 0) &&
+ (memcmp(tmp->slot_id, slot_id, SLOT_ID_LEN) == 0)) {
+ kref_get(&tmp->kref);
+ spin_unlock(&list_lock);
+ return tmp;
+ }
+ }
+ ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
+ if (!ctlr)
+ goto done;
+
+ /* initialize fields of controller */
+ memcpy(ctlr->subsys_id, subsys_id, SUBSYS_ID_LEN);
+ memcpy(ctlr->slot_id, slot_id, SLOT_ID_LEN);
+ kref_init(&ctlr->kref);
+ ctlr->use_ms10 = -1;
+ list_add(&ctlr->node, &ctlr_list);
+done:
+ spin_unlock(&list_lock);
+ return ctlr;
+}
+
+static int submit_inquiry(struct scsi_device *sdev, int page_code,
+ unsigned int len)
+{
+ struct request *rq;
+ struct request_queue *q = sdev->request_queue;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+ rq = get_rdac_req(sdev, &h->inq, len, READ);
+ if (!rq)
+ goto done;
+
+ /* Prepare the command. */
+ rq->cmd[0] = INQUIRY;
+ rq->cmd[1] = 1;
+ rq->cmd[2] = page_code;
+ rq->cmd[4] = len;
+ rq->cmd_len = COMMAND_SIZE(INQUIRY);
+ err = blk_execute_rq(q, NULL, rq, 1);
+ if (err == -EIO)
+ err = SCSI_DH_IO;
+done:
+ return err;
+}
+
+static int get_lun(struct scsi_device *sdev)
+{
+ int err;
+ struct c8_inquiry *inqp;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry));
+ if (err == SCSI_DH_OK) {
+ inqp = &h->inq.c8;
+ h->lun = inqp->lun[7]; /* currently it uses only one byte */
+ }
+ return err;
+}
+
+#define RDAC_OWNED 0
+#define RDAC_UNOWNED 1
+#define RDAC_FAILED 2
+static int check_ownership(struct scsi_device *sdev)
+{
+ int err;
+ struct c9_inquiry *inqp;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry));
+ if (err == SCSI_DH_OK) {
+ err = RDAC_UNOWNED;
+ inqp = &h->inq.c9;
+ /*
+ * If in AVT mode or if the path already owns the LUN,
+ * return RDAC_OWNED;
+ */
+ if (((inqp->avte_cvp >> 7) == 0x1) ||
+ ((inqp->avte_cvp & 0x1) != 0))
+ err = RDAC_OWNED;
+ } else
+ err = RDAC_FAILED;
+ return err;
+}
+
+static int initialize_controller(struct scsi_device *sdev)
+{
+ int err;
+ struct c4_inquiry *inqp;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry));
+ if (err == SCSI_DH_OK) {
+ inqp = &h->inq.c4;
+ h->ctlr = get_controller(inqp->subsys_id, inqp->slot_id);
+ if (!h->ctlr)
+ err = SCSI_DH_RES_TEMP_UNAVAIL;
+ }
+ return err;
+}
+
+static int set_mode_select(struct scsi_device *sdev)
+{
+ int err;
+ struct c2_inquiry *inqp;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+
+ err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry));
+ if (err == SCSI_DH_OK) {
+ inqp = &h->inq.c2;
+ /*
+ * If more than MODE6_MAX_LUN luns are supported, use
+ * mode select 10
+ */
+ if (inqp->max_lun_supported >= MODE6_MAX_LUN)
+ h->ctlr->use_ms10 = 1;
+ else
+ h->ctlr->use_ms10 = 0;
+ }
+ return err;
+}
+
+static int mode_select_handle_sense(struct scsi_device *sdev)
+{
+ struct scsi_sense_hdr sense_hdr;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ int sense, err = SCSI_DH_IO, ret;
+
+ ret = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
+ if (!ret)
+ goto done;
+
+ err = SCSI_DH_OK;
+ sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) |
+ sense_hdr.ascq;
+ /* If it is retryable failure, submit the c9 inquiry again */
+ if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 ||
+ sense == 0x62900) {
+ /* 0x59136 - Command lock contention
+ * 0x[6b]8b02 - Quiesense in progress or achieved
+ * 0x62900 - Power On, Reset, or Bus Device Reset
+ */
+ err = SCSI_DH_DEV_TEMP_BUSY;
+ }
+
+ if (sense)
+ sdev_printk(KERN_INFO, sdev,
+ "MODE_SELECT failed with sense 0x%x.\n", sense);
+done:
+ return err;
+}
+
+static int send_mode_select(struct scsi_device *sdev)
+{
+ struct request *rq;
+ struct request_queue *q = sdev->request_queue;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+ rq = rdac_failover_get(sdev);
+ if (!rq)
+ goto done;
+
+ sdev_printk(KERN_INFO, sdev, "queueing MODE_SELECT command.\n");
+
+ err = blk_execute_rq(q, NULL, rq, 1);
+ if (err != SCSI_DH_OK)
+ err = mode_select_handle_sense(sdev);
+ if (err == SCSI_DH_OK)
+ h->state = RDAC_STATE_ACTIVE;
+done:
+ return err;
+}
+
+static int rdac_activate(struct scsi_device *sdev)
+{
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ int err = SCSI_DH_OK;
+
+ if (h->lun == UNINITIALIZED_LUN) {
+ err = get_lun(sdev);
+ if (err != SCSI_DH_OK)
+ goto done;
+ }
+
+ err = check_ownership(sdev);
+ switch (err) {
+ case RDAC_UNOWNED:
+ break;
+ case RDAC_OWNED:
+ err = SCSI_DH_OK;
+ goto done;
+ case RDAC_FAILED:
+ default:
+ err = SCSI_DH_IO;
+ goto done;
+ }
+
+ if (!h->ctlr) {
+ err = initialize_controller(sdev);
+ if (err != SCSI_DH_OK)
+ goto done;
+ }
+
+ if (h->ctlr->use_ms10 == -1) {
+ err = set_mode_select(sdev);
+ if (err != SCSI_DH_OK)
+ goto done;
+ }
+
+ err = send_mode_select(sdev);
+done:
+ return err;
+}
+
+static int rdac_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ int ret = BLKPREP_OK;
+
+ if (h->state != RDAC_STATE_ACTIVE) {
+ ret = BLKPREP_KILL;
+ req->cmd_flags |= REQ_QUIET;
+ }
+ return ret;
+
+}
+
+static int rdac_check_sense(struct scsi_device *sdev,
+ struct scsi_sense_hdr *sense_hdr)
+{
+ struct rdac_dh_data *h = get_rdac_data(sdev);
+ switch (sense_hdr->sense_key) {
+ case NOT_READY:
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
+ /* LUN Not Ready - Storage firmware incompatible
+ * Manual code synchonisation required.
+ *
+ * Nothing we can do here. Try to bypass the path.
+ */
+ return SUCCESS;
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0xA1)
+ /* LUN Not Ready - Quiescense in progress
+ *
+ * Just retry and wait.
+ */
+ return NEEDS_RETRY;
+ break;
+ case ILLEGAL_REQUEST:
+ if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
+ /* Invalid Request - Current Logical Unit Ownership.
+ * Controller is not the current owner of the LUN,
+ * Fail the path, so that the other path be used.
+ */
+ h->state = RDAC_STATE_PASSIVE;
+ return SUCCESS;
+ }
+ break;
+ case UNIT_ATTENTION:
+ if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+ /*
+ * Power On, Reset, or Bus Device Reset, just retry.
+ */
+ return NEEDS_RETRY;
+ break;
+ }
+ /* success just means we do not care what scsi-ml does */
+ return SCSI_RETURN_NOT_HANDLED;
+}
+
+static const struct {
+ char *vendor;
+ char *model;
+} rdac_dev_list[] = {
+ {"IBM", "1815"},
+ {NULL, NULL},
+};
+
+static int rdac_bus_notify(struct notifier_block *, unsigned long, void *);
+
+static struct scsi_device_handler rdac_dh = {
+ .name = RDAC_NAME,
+ .module = THIS_MODULE,
+ .nb.notifier_call = rdac_bus_notify,
+ .prep_fn = rdac_prep_fn,
+ .check_sense = rdac_check_sense,
+ .activate = rdac_activate,
+};
+
+/*
+ * TODO: need some interface so we can set trespass values
+ */
+static int rdac_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_dh_data *scsi_dh_data;
+ struct rdac_dh_data *h;
+ int i, found = 0;
+ unsigned long flags;
+
+ if (action == BUS_NOTIFY_ADD_DEVICE) {
+ for (i = 0; rdac_dev_list[i].vendor; i++) {
+ if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
+ strlen(rdac_dev_list[i].vendor)) &&
+ !strncmp(sdev->model, rdac_dev_list[i].model,
+ strlen(rdac_dev_list[i].model))) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found)
+ goto out;
+
+ scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+ + sizeof(*h) , GFP_KERNEL);
+ if (!scsi_dh_data) {
+ sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
+ RDAC_NAME);
+ goto out;
+ }
+
+ scsi_dh_data->scsi_dh = &rdac_dh;
+ h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ h->lun = UNINITIALIZED_LUN;
+ h->state = RDAC_STATE_ACTIVE;
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ sdev->scsi_dh_data = scsi_dh_data;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ try_module_get(THIS_MODULE);
+
+ sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", RDAC_NAME);
+
+ } else if (action == BUS_NOTIFY_DEL_DEVICE) {
+ BUG_ON(sdev->scsi_dh_data == NULL);
+ if (sdev->scsi_dh_data->scsi_dh != &rdac_dh)
+ goto out;
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ scsi_dh_data = sdev->scsi_dh_data;
+ sdev->scsi_dh_data = NULL;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+ h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ if (h->ctlr)
+ kref_put(&h->ctlr->kref, release_controller);
+ kfree(scsi_dh_data);
+ module_put(THIS_MODULE);
+ sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", RDAC_NAME);
+ }
+
+out:
+ return 0;
+}
+
+static int __init rdac_init(void)
+{
+ int r;
+
+ r = scsi_register_device_handler(&rdac_dh);
+ if (r != 0)
+ printk(KERN_ERR "Failed to register scsi device handler.");
+ return r;
+}
+
+static void __exit rdac_exit(void)
+{
+ scsi_unregister_device_handler(&rdac_dh);
+}
+
+module_init(rdac_init);
+module_exit(rdac_exit);
+
+MODULE_DESCRIPTION("Multipath LSI/Engenio RDAC driver");
+MODULE_AUTHOR("Mike Christie, Chandra Seetharaman");
+MODULE_LICENSE("GPL");
Index: linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/Makefile
===================================================================
--- linux-2.6.25-rc8-mm2.orig/drivers/scsi/device_handler/Makefile
+++ linux-2.6.25-rc8-mm2/drivers/scsi/device_handler/Makefile
@@ -2,3 +2,4 @@
# SCSI Device Handler
#
obj-$(CONFIG_SCSI_DH) += scsi_dh.o
+obj-$(CONFIG_SCSI_DH_RDAC) += scsi_dh_rdac.o
next prev parent reply other threads:[~2008-04-16 1:18 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-16 1:18 [PATCH 0/7] scsi_dh: Move hardware handlers from dm to SCSI Chandra Seetharaman
2008-04-16 1:18 ` [PATCH 1/7] scsi_dh: add skeleton for SCSI Device Handlers Chandra Seetharaman
2008-04-16 1:18 ` Chandra Seetharaman [this message]
2008-04-16 1:18 ` [PATCH 3/7] scsi_dh: add hp sw device handler Chandra Seetharaman
2008-04-16 1:18 ` [PATCH 4/7] scsi_dh: add EMC Clariion " Chandra Seetharaman
2008-04-16 16:29 ` Mike Christie
2008-04-16 23:59 ` [dm-devel] " Chandra Seetharaman
2008-04-17 17:14 ` Mike Christie
2008-04-22 21:09 ` [dm-devel] " Chandra Seetharaman
2008-04-22 21:47 ` Mike Christie
2008-04-22 21:50 ` Mike Christie
2008-04-22 23:45 ` [dm-devel] " Chandra Seetharaman
2008-04-16 1:18 ` [PATCH 5/7] scsi_dh: Use SCSI device handler in dm-multipath Chandra Seetharaman
2008-04-16 1:18 ` [PATCH 6/7] scsi_dh: Remove hardware handlers from dm Chandra Seetharaman
2008-04-16 1:19 ` [PATCH 7/7] scsi_dh: Remove hardware handler infrastructure " Chandra Seetharaman
-- strict thread matches above, loose matches on Subject: below --
2008-04-17 22:22 [PATCH 0/7] scsi_dh: Move hardware handlers from dm to SCSI Chandra Seetharaman
2008-04-17 22:22 ` [PATCH 2/7] scsi_dh: add lsi rdac device handler Chandra Seetharaman
2008-04-17 21:18 [PATCH 0/7] scsi_dh: Move hardware handlers from dm to SCSI Chandra Seetharaman
2008-04-17 21:19 ` [PATCH 2/7] scsi_dh: add lsi rdac device handler Chandra Seetharaman
2008-04-01 22:51 [PATCH 0/7] scsi_dh: Move hardware handlers from dm to SCSI Chandra Seetharaman
2008-04-01 22:51 ` [PATCH 2/7] scsi_dh: add lsi rdac device handler Chandra Seetharaman
2008-03-11 1:33 [PATCH 0/7] scsi_dh: Move hardware handlers from dm to SCSI Chandra Seetharaman
2008-03-11 1:33 ` [PATCH 2/7] scsi_dh: add lsi rdac device handler Chandra Seetharaman
2008-02-28 1:08 [PATCH 0/7] Move hardware handlers from dm layer to SCSI layer Chandra Seetharaman
2008-02-28 1:08 ` [PATCH 2/7] scsi_dh: add lsi rdac device handler Chandra Seetharaman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080416011830.19580.27485.sendpatchset@chandra-ubuntu \
--to=sekharan@us.ibm.com \
--cc=Benoit_Arthur@emc.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=agk@redhat.com \
--cc=andmike@us.ibm.com \
--cc=asson_ronald@emc.com \
--cc=dm-devel@redhat.com \
--cc=jens.axboe@oracle.com \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.