From: Tony Lindgren <tony@atomide.com>
To: "Syed Mohammed, Khasim" <khasim@ti.com>
Cc: linux-omap@vger.kernel.org, discussion@beagleboard.org
Subject: Re: [Patch 1/4] Adding support for OMAP3 EVM
Date: Fri, 18 Apr 2008 12:07:58 -0700 [thread overview]
Message-ID: <20080418190757.GJ12099@atomide.com> (raw)
In-Reply-To: <7EAD1AEEA7621C45899FE99123E124A0018C8B07@dbde01.ent.ti.com>
Just two minor cosmetic comments below:
* Syed Mohammed, Khasim <khasim@ti.com> [080416 19:09]:
>
> Adding support for OMAP3 EVM Board
>
> Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
> ---
> arch/arm/mach-omap2/Kconfig | 3 +
> arch/arm/mach-omap2/Makefile | 1
> arch/arm/mach-omap2/board-omap3evm.c | 79 +++++++++++++++++++++++++++++
> include/asm-arm/arch-omap/board-omap3evm.h | 53 +++++++++++++++++++
> include/asm-arm/arch-omap/hardware.h | 4 +
> 5 files changed, 140 insertions(+)
>
> Index: my_branch/arch/arm/mach-omap2/Makefile
> ===================================================================
> --- my_branch.orig/arch/arm/mach-omap2/Makefile 2008-04-16 14:39:51.000000000 +0530
> +++ my_branch/arch/arm/mach-omap2/Makefile 2008-04-16 14:41:28.000000000 +0530
> @@ -34,6 +34,7 @@
> board-sdp-hsmmc.o \
> board-3430sdp-usb.o \
> board-3430sdp-flash.o
> +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
> obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o \
> board-apollon-mmc.o \
> board-apollon-keys.o
>
> Index: my_branch/arch/arm/mach-omap2/Kconfig
> ===================================================================
> --- my_branch.orig/arch/arm/mach-omap2/Kconfig 2008-04-16 14:40:02.000000000 +0530
> +++ my_branch/arch/arm/mach-omap2/Kconfig 2008-04-16 14:41:28.000000000 +0530
> @@ -106,3 +106,6 @@
> bool "OMAP 3430 SDP board"
> depends on ARCH_OMAP3 && ARCH_OMAP34XX
>
> +config MACH_OMAP3EVM
> + bool "OMAP 3530 EVM board"
> + depends on ARCH_OMAP3 && ARCH_OMAP34XX
>
> Index: my_branch/arch/arm/mach-omap2/board-omap3evm.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ my_branch/arch/arm/mach-omap2/board-omap3evm.c 2008-04-16 14:42:30.000000000 +0530
> @@ -0,0 +1,79 @@
> +/*
> + * linux/arch/arm/mach-omap2/board-omap3evm.c
> + *
> + * Copyright (C) 2008 Texas Instruments
> + *
> + * Modified from mach-omap2/board-3430sdp.c
> + *
> + * Initial code: Syed Mohammed Khasim
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +
> +#include <asm/hardware.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/board.h>
> +#include <asm/arch/common.h>
> +
> +static struct omap_uart_config omap3_evm_uart_config __initdata = {
> + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
> +};
> +
> +static int __init omap3_evm_i2c_init(void)
> +{
> + omap_register_i2c_bus(1, 2600, NULL, 0);
> + omap_register_i2c_bus(2, 400, NULL, 0);
> + omap_register_i2c_bus(3, 400, NULL, 0);
> + return 0;
> +}
> +
> +static void __init omap3_evm_init_irq(void)
> +{
> + omap2_init_common_hw();
> + omap_init_irq();
> + omap_gpio_init();
> +}
> +
> +static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
> + {OMAP_TAG_UART, &omap3_evm_uart_config },
> +};
> +
Can you please add a space between { OMAP_TAG_UART... above?
> +static void __init omap3_evm_init(void)
> +{
> + omap_board_config = omap3_evm_config;
> + omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
> + omap_serial_init();
> +}
> +
> +arch_initcall(omap3_evm_i2c_init);
> +
> +static void __init omap3_evm_map_io(void)
> +{
> + omap2_set_globals_343x();
> + omap2_map_common_io();
> +}
> +
> +MACHINE_START(OMAP3EVM, "OMAP3 EVM")
> + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
> + .phys_io = 0x48000000,
> + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
> + .boot_params = 0x80000100,
> + .map_io = omap3_evm_map_io,
> + .init_irq = omap3_evm_init_irq,
> + .init_machine = omap3_evm_init,
> + .timer = &omap_timer,
> +MACHINE_END
>
> Index: my_branch/include/asm-arm/arch-omap/hardware.h
> ===================================================================
> --- my_branch.orig/include/asm-arm/arch-omap/hardware.h 2008-04-16 14:39:51.000000000 +0530
> +++ my_branch/include/asm-arm/arch-omap/hardware.h 2008-04-16 14:44:09.000000000 +0530
> @@ -335,6 +335,10 @@
> #include "board-3430sdp.h"
> #endif
>
> +#ifdef CONFIG_MACH_OMAP3EVM
> +#include "board-omap3evm.h"
> +#endif
> +
> #ifdef CONFIG_MACH_OMAP_APOLLON
> #include "board-apollon.h"
> #endif
>
> Index: my_branch/include/asm-arm/arch-omap/board-omap3evm.h
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ my_branch/include/asm-arm/arch-omap/board-omap3evm.h 2008-04-16 14:44:09.000000000 +0530
> @@ -0,0 +1,53 @@
> +/*
> + * linux/include/asm-arm/arch-omap/board-omap3evm.h
> + *
> + * Hardware definitions for TI OMAP3 EVM.
> + *
> + * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __ASM_ARCH_OMAP3_EVM_H
> +#define __ASM_ARCH_OMAP3_EVM_H
> +
> +#ifdef CONFIG_TWL4030_CORE
> +
> +#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
> +
> +/* TWL4030 Primary Interrupt Handler (PIH) interrupts */
> +#define IH_TWL4030_BASE IH_BOARD_BASE
> +#define IH_TWL4030_END (IH_TWL4030_BASE+8)
> +#define IH_TWL4030_PWRBASE (IH_TWL4030_END)
> +#define IH_TWL4030_PWRBASE_END (IH_TWL4030_PWRBASE+8)
> +
> +#ifdef CONFIG_TWL4030_GPIO
> +/* TWL4030 GPIO Interrupts */
> +#define IH_TWL4030_GPIO_BASE (IH_TWL4030_PWRBASE_END)
> +#define IH_TWL4030_GPIO_END (IH_TWL4030_GPIO_BASE+18)
> +#define NR_IRQS (IH_TWL4030_GPIO_END)
> +#else
> +#define NR_IRQS (IH_TWL4030_PWRBASE_END)
> +#endif /* CONFIG_I2C_TWL4030_GPIO */
> +
> +#endif /* End of support for TWL4030 */
> +#endif /* __ASM_ARCH_OMAP3_EVM_H */
Please remove the extra space above before __ASM_ARCH...
> +
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-04-18 19:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-17 2:08 [Patch 1/4] Adding support for OMAP3 EVM Syed Mohammed, Khasim
2008-04-18 19:07 ` Tony Lindgren [this message]
2008-04-19 3:00 ` Syed Mohammed, Khasim
2008-04-19 3:31 ` Syed Mohammed, Khasim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080418190757.GJ12099@atomide.com \
--to=tony@atomide.com \
--cc=discussion@beagleboard.org \
--cc=khasim@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.