From: "Stephen Neuendorffer" <stephen.neuendorffer@xilinx.com>
To: <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Subject: RE: [PATCH 1/5] [v2][POWERPC] refactor dcr code
Date: Fri, 18 Apr 2008 14:49:58 -0700 [thread overview]
Message-ID: <20080418215000.38B12250051@mail200-sin.bigfish.com> (raw)
In-Reply-To: <1206914576.10388.132.camel@pasglop>
Ben,
I'd like to get the first two patches tested and queued up for mainline
(although it's probably too late for this merge window, I suppose). I'm
going to punt on the ppc patches and put off fixing the tft driver until
ARCH=3Dppc goes away.
I've fixed a typo in patch description: The dcr-access-method attribute
is on the dcr-controller, not the dcr slave.
Steve
> -----Original Message-----
> From: Benjamin Herrenschmidt [mailto:benh@kernel.crashing.org]
> Sent: Sunday, March 30, 2008 3:03 PM
> To: Stephen Neuendorffer
> Cc: linuxppc-dev@ozlabs.org
> Subject: Re: [PATCH 1/5] [v2][POWERPC] refactor dcr code
>=20
>=20
> On Fri, 2008-03-28 at 09:23 -0700, Stephen Neuendorffer wrote:
> > Previously, dcr support was configured at compile time to either
using
> > MMIO or native dcr instructions. Although this works for most
> > platforms, it fails on FPGA platforms:
> >
> > 1) Systems may include more than one dcr bus.
> > 2) Systems may be native dcr capable and still use memory mapped dcr
interface.
> >
> > This patch provides runtime support based on the device trees for
the
> > case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both
> > selected. Previously, this was a poorly defined configuration,
which
> > happened to provide NATIVE support. The runtime selection is made
> > based on the dcr slave device having a 'dcr-access-method' attribute
> > in the device tree. If only one of the above options is selected,
> > then the code uses #defines to select only the used code in order to
> > avoid interoducing overhead in existing usage.
> >
> > Signed-off-by: Stephen Neuendorffer
<stephen.neuendorffer@xilinx.com>
>=20
> Looks good. Haven't had a chance to test it yet, but tentatively
>=20
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>=20
> Initially, I thought about using function pointers but the if/else
will
> probably end up being more efficient. The only thing maybe to ponder
> is whether we could avoid the dcr-generic.h file completely, and have
> the generic wrappers be inline, though considering how slow DCRs are,
> it may not be that useful in practice and less clean...
>=20
> Cheers,
> Ben.
>=20
>=20
> > ---
> > arch/powerpc/sysdev/dcr.c | 91
++++++++++++++++++++++++++++++++-----
> > include/asm-powerpc/dcr-generic.h | 49 ++++++++++++++++++++
> > include/asm-powerpc/dcr-mmio.h | 20 +++++---
> > include/asm-powerpc/dcr-native.h | 16 ++++---
> > include/asm-powerpc/dcr.h | 36 ++++++++++++++-
> > 5 files changed, 186 insertions(+), 26 deletions(-)
> > create mode 100644 include/asm-powerpc/dcr-generic.h
> >
> > diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
> > index 437e48d..d3de0ff 100644
> > --- a/arch/powerpc/sysdev/dcr.c
> > +++ b/arch/powerpc/sysdev/dcr.c
> > @@ -23,6 +23,68 @@
> > #include <asm/prom.h>
> > #include <asm/dcr.h>
> >
> > +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
> > +
> > +bool dcr_map_ok_generic(dcr_host_t host)
> > +{
> > + if (host.type =3D=3D INVALID)
> > + return 0;
> > + else if (host.type =3D=3D NATIVE)
> > + return dcr_map_ok_native(host.host.native);
> > + else
> > + return dcr_map_ok_mmio(host.host.mmio);
> > +}
> > +EXPORT_SYMBOL_GPL(dcr_map_ok_generic);
> > +
> > +dcr_host_t dcr_map_generic(struct device_node *dev,
> > + unsigned int dcr_n,
> > + unsigned int dcr_c)
> > +{
> > + dcr_host_t host;
> > + const char *prop =3D of_get_property(dev, "dcr-access-method",
NULL);
> > +
> > + if (!strcmp(prop, "native")) {
> > + host.type =3D NATIVE;
> > + host.host.native =3D dcr_map_native(dev, dcr_n, dcr_c);
> > + } else if (!strcmp(prop, "mmio")) {
> > + host.type =3D MMIO;
> > + host.host.mmio =3D dcr_map_mmio(dev, dcr_n, dcr_c);
> > + } else
> > + host.type =3D INVALID;
> > +
> > + return host;
> > +}
> > +EXPORT_SYMBOL_GPL(dcr_map_generic);
> > +
> > +void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c)
> > +{
> > + if (host.type =3D=3D NATIVE)
> > + dcr_unmap_native(host.host.native, dcr_c);
> > + else
> > + dcr_unmap_mmio(host.host.mmio, dcr_c);
> > +}
> > +EXPORT_SYMBOL_GPL(dcr_unmap_generic);
> > +
> > +u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n)
> > +{
> > + if (host.type =3D=3D NATIVE)
> > + return dcr_read_native(host.host.native, dcr_n);
> > + else
> > + return dcr_read_mmio(host.host.mmio, dcr_n);
> > +}
> > +EXPORT_SYMBOL_GPL(dcr_read_generic);
> > +
> > +void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32
value)
> > +{
> > + if (host.type =3D=3D NATIVE)
> > + dcr_write_native(host.host.native, dcr_n, value);
> > + else
> > + dcr_write_mmio(host.host.mmio, dcr_n, value);
> > +}
> > +EXPORT_SYMBOL_GPL(dcr_write_generic);
> > +
> > +#endif /* defined(CONFIG_PPC_DCR_NATIVE) &&
defined(CONFIG_PPC_DCR_MMIO) */
> > +
> > unsigned int dcr_resource_start(struct device_node *np, unsigned
int index)
> > {
> > unsigned int ds;
> > @@ -47,7 +109,7 @@ unsigned int dcr_resource_len(struct device_node
*np, unsigned int index)
> > }
> > EXPORT_SYMBOL_GPL(dcr_resource_len);
> >
> > -#ifndef CONFIG_PPC_DCR_NATIVE
> > +#ifdef CONFIG_PPC_DCR_MMIO
> >
> > static struct device_node * find_dcr_parent(struct device_node *
node)
> > {
> > @@ -101,18 +163,19 @@ u64 of_translate_dcr_address(struct
device_node *dev,
> > return ret;
> > }
> >
> > -dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
> > - unsigned int dcr_c)
> > +dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
> > + unsigned int dcr_n,
> > + unsigned int dcr_c)
> > {
> > - dcr_host_t ret =3D { .token =3D NULL, .stride =3D 0, .base =3D =
dcr_n };
> > + dcr_host_mmio_t ret =3D { .token =3D NULL, .stride =3D 0, .base =
=3D
dcr_n };
> > u64 addr;
> >
> > pr_debug("dcr_map(%s, 0x%x, 0x%x)\n",
> > dev->full_name, dcr_n, dcr_c);
> >
> > addr =3D of_translate_dcr_address(dev, dcr_n, &ret.stride);
> > - pr_debug("translates to addr: 0x%lx, stride: 0x%x\n",
> > - addr, ret.stride);
> > + pr_debug("translates to addr: 0x%llx, stride: 0x%x\n",
> > + (unsigned long long) addr, ret.stride);
> > if (addr =3D=3D OF_BAD_ADDR)
> > return ret;
> > pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride);
> > @@ -124,11 +187,11 @@ dcr_host_t dcr_map(struct device_node *dev,
unsigned int dcr_n,
> > ret.token -=3D dcr_n * ret.stride;
> > return ret;
> > }
> > -EXPORT_SYMBOL_GPL(dcr_map);
> > +EXPORT_SYMBOL_GPL(dcr_map_mmio);
> >
> > -void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
> > +void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c)
> > {
> > - dcr_host_t h =3D host;
> > + dcr_host_mmio_t h =3D host;
> >
> > if (h.token =3D=3D NULL)
> > return;
> > @@ -136,7 +199,11 @@ void dcr_unmap(dcr_host_t host, unsigned int
dcr_c)
> > iounmap(h.token);
> > h.token =3D NULL;
> > }
> > -EXPORT_SYMBOL_GPL(dcr_unmap);
> > -#else /* defined(CONFIG_PPC_DCR_NATIVE) */
> > +EXPORT_SYMBOL_GPL(dcr_unmap_mmio);
> > +
> > +#endif /* defined(CONFIG_PPC_DCR_MMIO) */
> > +
> > +#ifdef CONFIG_PPC_DCR_NATIVE
> > DEFINE_SPINLOCK(dcr_ind_lock);
> > -#endif /* !defined(CONFIG_PPC_DCR_NATIVE) */
> > +#endif /* defined(CONFIG_PPC_DCR_NATIVE) */
> > +
> > diff --git a/include/asm-powerpc/dcr-generic.h
b/include/asm-powerpc/dcr-generic.h
> > new file mode 100644
> > index 0000000..0ee74fb
> > --- /dev/null
> > +++ b/include/asm-powerpc/dcr-generic.h
> > @@ -0,0 +1,49 @@
> > +/*
> > + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
> > + * <benh@kernel.crashing.org>
> > + *
> > + * This program is free software; you can redistribute it and/or
modify
> > + * it under the terms of the GNU General Public License as
published by
> > + * the Free Software Foundation; either version 2 of the License,
or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be
useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty
of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
> > + * the GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public
License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
> > + */
> > +
> > +#ifndef _ASM_POWERPC_DCR_GENERIC_H
> > +#define _ASM_POWERPC_DCR_GENERIC_H
> > +#ifdef __KERNEL__
> > +#ifndef __ASSEMBLY__
> > +
> > +enum host_type_t {MMIO, NATIVE, INVALID};
> > +
> > +typedef struct {
> > + enum host_type_t type;
> > + union {
> > + dcr_host_mmio_t mmio;
> > + dcr_host_native_t native;
> > + } host;
> > +} dcr_host_t;
> > +
> > +extern bool dcr_map_ok_generic(dcr_host_t host);
> > +
> > +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned
int dcr_n,
> > + unsigned int dcr_c);
> > +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
> > +
> > +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
> > +
> > +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n,
u32 value);
> > +
> > +#endif /* __ASSEMBLY__ */
> > +#endif /* __KERNEL__ */
> > +#endif /* _ASM_POWERPC_DCR_GENERIC_H */
> > +
> > +
> > diff --git a/include/asm-powerpc/dcr-mmio.h
b/include/asm-powerpc/dcr-mmio.h
> > index 08532ff..acd491d 100644
> > --- a/include/asm-powerpc/dcr-mmio.h
> > +++ b/include/asm-powerpc/dcr-mmio.h
> > @@ -27,20 +27,26 @@ typedef struct {
> > void __iomem *token;
> > unsigned int stride;
> > unsigned int base;
> > -} dcr_host_t;
> > +} dcr_host_mmio_t;
> >
> > -#define DCR_MAP_OK(host) ((host).token !=3D NULL)
> > +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
> > +{
> > + return host.token !=3D NULL;
> > +}
> >
> > -extern dcr_host_t dcr_map(struct device_node *dev, unsigned int
dcr_n,
> > - unsigned int dcr_c);
> > -extern void dcr_unmap(dcr_host_t host, unsigned int dcr_c);
> > +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
> > + unsigned int dcr_n,
> > + unsigned int dcr_c);
> > +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int
dcr_c);
> >
> > -static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n)
> > +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int
dcr_n)
> > {
> > return in_be32(host.token + ((host.base + dcr_n) *
host.stride));
> > }
> >
> > -static inline void dcr_write(dcr_host_t host, unsigned int dcr_n,
u32 value)
> > +static inline void dcr_write_mmio(dcr_host_mmio_t host,
> > + unsigned int dcr_n,
> > + u32 value)
> > {
> > out_be32(host.token + ((host.base + dcr_n) * host.stride),
value);
> > }
> > diff --git a/include/asm-powerpc/dcr-native.h
b/include/asm-powerpc/dcr-native.h
> > index be6c879..67832e5 100644
> > --- a/include/asm-powerpc/dcr-native.h
> > +++ b/include/asm-powerpc/dcr-native.h
> > @@ -26,14 +26,18 @@
> >
> > typedef struct {
> > unsigned int base;
> > -} dcr_host_t;
> > +} dcr_host_native_t;
> >
> > -#define DCR_MAP_OK(host) (1)
> > +static inline bool dcr_map_ok_native(dcr_host_native_t host)
> > +{
> > + return 1;
> > +}
> >
> > -#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base =3D (dcr_n)
})
> > -#define dcr_unmap(host, dcr_c) do {} while (0)
> > -#define dcr_read(host, dcr_n) mfdcr(dcr_n + host.base)
> > -#define dcr_write(host, dcr_n, value) mtdcr(dcr_n + host.base,
value)
> > +#define dcr_map_native(dev, dcr_n, dcr_c) \
> > + ((dcr_host_native_t){ .base =3D (dcr_n) })
> > +#define dcr_unmap_native(host, dcr_c) do {} while (0)
> > +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n +
host.base)
> > +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n +
host.base, value)
> >
> > /* Device Control Registers */
> > void __mtdcr(int reg, unsigned int val);
> > diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
> > index 9338d50..6b86322 100644
> > --- a/include/asm-powerpc/dcr.h
> > +++ b/include/asm-powerpc/dcr.h
> > @@ -20,14 +20,47 @@
> > #ifndef _ASM_POWERPC_DCR_H
> > #define _ASM_POWERPC_DCR_H
> > #ifdef __KERNEL__
> > +#ifndef __ASSEMBLY__
> > #ifdef CONFIG_PPC_DCR
> >
> > #ifdef CONFIG_PPC_DCR_NATIVE
> > #include <asm/dcr-native.h>
> > -#else
> > +#endif
> > +
> > +#ifdef CONFIG_PPC_DCR_MMIO
> > #include <asm/dcr-mmio.h>
> > #endif
> >
> > +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
> > +
> > +#include <asm/dcr-generic.h>
> > +
> > +#define DCR_MAP_OK(host) dcr_map_ok_generic(host)
> > +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n,
dcr_c)
> > +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
> > +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
> > +#define dcr_write(host, dcr_n, value) dcr_write_generic(host,
dcr_n, value)
> > +
> > +#else
> > +
> > +#ifdef CONFIG_PPC_DCR_NATIVE
> > +typedef dcr_host_native_t dcr_host_t;
> > +#define DCR_MAP_OK(host) dcr_map_ok_native(host)
> > +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n,
dcr_c)
> > +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
> > +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
> > +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n,
value)
> > +#else
> > +typedef dcr_host_mmio_t dcr_host_t;
> > +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host)
> > +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
> > +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
> > +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
> > +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n,
value)
> > +#endif
> > +
> > +#endif /* defined(CONFIG_PPC_DCR_NATIVE) &&
defined(CONFIG_PPC_DCR_MMIO) */
> > +
> > /*
> > * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
> > * base from the device-tree
> > @@ -41,5 +74,6 @@ extern unsigned int dcr_resource_len(struct
device_node *np,
> > #endif /* CONFIG_PPC_MERGE */
> >
> > #endif /* CONFIG_PPC_DCR */
> > +#endif /* __ASSEMBLY__ */
> > #endif /* __KERNEL__ */
> > #endif /* _ASM_POWERPC_DCR_H */
>=20
next prev parent reply other threads:[~2008-04-18 21:50 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1206401313-1625-1-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:20 ` [PATCH 1/5] [v2][POWERPC] refactor dcr code Stephen Neuendorffer
[not found] ` <1206721237-17982-1-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:20 ` [PATCH 2/5] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO and NATIVE Stephen Neuendorffer
[not found] ` <1206721237-17982-2-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:20 ` [PATCH 3/5] [POWERPC] explicit dcr support Stephen Neuendorffer
[not found] ` <1206721237-17982-3-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:20 ` [PATCH 4/5] [POWERPC] Xilinx: Framebuffer: Use dcr infrastructure Stephen Neuendorffer
[not found] ` <1206721237-17982-4-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:20 ` [PATCH 5/5] [RFC][PPC] Use DCR for arch ppc, and enable MMIO and NATIVE for virtex Stephen Neuendorffer
2008-03-28 16:23 ` [PATCH 1/5] [v2][POWERPC] refactor dcr code Stephen Neuendorffer
2008-03-30 22:02 ` Benjamin Herrenschmidt
2008-04-01 20:16 ` Stephen Neuendorffer
2008-04-04 22:02 ` Stephen Neuendorffer
2008-04-04 22:10 ` Benjamin Herrenschmidt
2008-04-18 21:49 ` Stephen Neuendorffer [this message]
2008-04-18 21:55 ` [PATCH 1/2] [v3][POWERPC] " Stephen Neuendorffer
2008-04-19 2:30 ` Grant Likely
2008-04-19 3:04 ` Benjamin Herrenschmidt
2008-04-19 14:35 ` Josh Boyer
2008-04-21 3:56 ` Stephen Neuendorffer
2008-04-21 13:03 ` Josh Boyer
2008-05-05 17:56 ` [PATCH 0/4] [v4][POWERPC] " Stephen Neuendorffer
[not found] ` <1210010201-28436-1-git-send-email-stephen.neuendorffer@xilinx.com>
2008-05-05 17:56 ` [PATCH 1/4] " Stephen Neuendorffer
2008-05-06 0:12 ` Benjamin Herrenschmidt
2008-05-06 3:40 ` Stephen Rothwell
2008-05-06 4:02 ` Benjamin Herrenschmidt
2008-05-06 17:34 ` Stephen Neuendorffer
2008-05-06 17:40 ` Josh Boyer
2008-05-06 18:29 ` [PATCH 1/4] [v5][POWERPC] " Stephen Neuendorffer
[not found] ` <1210010201-28436-2-git-send-email-stephen.neuendorffer@xilinx.com>
2008-05-05 17:56 ` [PATCH 2/4] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO and NATIVE Stephen Neuendorffer
2008-05-06 0:11 ` Benjamin Herrenschmidt
2008-05-06 17:33 ` [PATCH 2/4] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO andNATIVE Stephen Neuendorffer
[not found] ` <1210010201-28436-3-git-send-email-stephen.neuendorffer@xilinx.com>
2008-05-05 17:56 ` [PATCH 3/4] [POWERPC] Xilinx: Framebuffer: remove platform device support Stephen Neuendorffer
[not found] ` <1210010201-28436-4-git-send-email-stephen.neuendorffer@xilinx.com>
2008-05-05 17:56 ` [PATCH 4/4] [POWERPC] Xilinx: Framebuffer: Use dcr infrastructure Stephen Neuendorffer
2008-05-06 4:55 ` Grant Likely
2008-05-06 6:14 ` David Gibson
2008-05-06 10:56 ` Segher Boessenkool
2008-05-08 1:57 ` David Gibson
2008-05-06 17:43 ` [PATCH 4/4] [POWERPC] Xilinx: Framebuffer: Use dcrinfrastructure Stephen Neuendorffer
2008-05-08 1:59 ` David Gibson
2008-05-08 4:46 ` [PATCH 4/4] [POWERPC] Xilinx: Framebuffer: Usedcrinfrastructure Stephen Neuendorffer
2008-05-08 7:01 ` David Gibson
[not found] ` <1208555704-8978-1-git-send-email-stephen.neuendorffer@xilinx.com>
2008-04-18 21:55 ` [PATCH 2/2] [POWERPC] Xilinx: Virtex: Enable dcr for MMIO and NATIVE Stephen Neuendorffer
2008-04-19 2:31 ` Grant Likely
[not found] ` <1206721429-18276-1-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:23 ` [PATCH 2/5] " Stephen Neuendorffer
[not found] ` <1206721429-18276-2-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:23 ` [PATCH 3/5] [POWERPC] explicit dcr support Stephen Neuendorffer
2008-03-30 22:04 ` Benjamin Herrenschmidt
[not found] ` <1206721429-18276-3-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:23 ` [PATCH 4/5] [POWERPC] Xilinx: Framebuffer: Use dcr infrastructure Stephen Neuendorffer
[not found] ` <1206721429-18276-4-git-send-email-stephen.neuendorffer@xilinx.com>
2008-03-28 16:23 ` [PATCH 5/5] [RFC][PPC] Use DCR for arch ppc, and enable MMIO and NATIVE for virtex Stephen Neuendorffer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080418215000.38B12250051@mail200-sin.bigfish.com \
--to=stephen.neuendorffer@xilinx.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.