From: Michael Buesch <mb@bu3sch.de>
To: John Linville <linville@tuxdriver.com>
Cc: bcm43xx-dev@lists.berlios.de, linux-wireless@vger.kernel.org
Subject: [PATCH] b43: Remove some dead code
Date: Sun, 20 Apr 2008 16:23:26 +0200 [thread overview]
Message-ID: <200804201623.26816.mb@bu3sch.de> (raw)
This patch removes some dead code from the driver.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
---
John, please queue for 2.6.27
Index: wireless-testing/drivers/net/wireless/b43/lo.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/lo.c 2008-04-20 15:24:10.000000000 +0200
+++ wireless-testing/drivers/net/wireless/b43/lo.c 2008-04-20 16:21:36.000000000 +0200
@@ -55,28 +55,26 @@ static struct b43_lo_calib * b43_find_lo
/* Write the LocalOscillator Control (adjust) value-pair. */
static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
{
struct b43_phy *phy = &dev->phy;
u16 value;
- u16 reg;
if (B43_DEBUG) {
if (unlikely(abs(control->i) > 16 || abs(control->q) > 16)) {
b43dbg(dev->wl, "Invalid LO control pair "
"(I: %d, Q: %d)\n", control->i, control->q);
dump_stack();
return;
}
}
+ B43_WARN_ON(phy->type != B43_PHYTYPE_G);
value = (u8) (control->q);
value |= ((u8) (control->i)) << 8;
-
- reg = (phy->type == B43_PHYTYPE_B) ? 0x002F : B43_PHY_LO_CTL;
- b43_phy_write(dev, reg, value);
+ b43_phy_write(dev, B43_PHY_LO_CTL, value);
}
static u16 lo_measure_feedthrough(struct b43_wldev *dev,
u16 lna, u16 pga, u16 trsw_rx)
{
struct b43_phy *phy = &dev->phy;
Index: wireless-testing/drivers/net/wireless/b43/phy.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/phy.c 2008-04-20 15:41:46.000000000 +0200
+++ wireless-testing/drivers/net/wireless/b43/phy.c 2008-04-20 16:21:36.000000000 +0200
@@ -887,115 +887,12 @@ static void b43_phy_inita(struct b43_wld
b43_phy_write(dev, B43_PHY_OFDM(0x6E),
(b43_phy_read(dev, B43_PHY_OFDM(0x6E))
& 0xE000) | 0x3CF);
}
}
-static void b43_phy_initb2(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 offset, val;
-
- b43_write16(dev, 0x03EC, 0x3F22);
- b43_phy_write(dev, 0x0020, 0x301C);
- b43_phy_write(dev, 0x0026, 0x0000);
- b43_phy_write(dev, 0x0030, 0x00C6);
- b43_phy_write(dev, 0x0088, 0x3E00);
- val = 0x3C3D;
- for (offset = 0x0089; offset < 0x00A7; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- b43_phy_write(dev, 0x03E4, 0x3000);
- b43_radio_selectchannel(dev, phy->channel, 0);
- if (phy->radio_ver != 0x2050) {
- b43_radio_write16(dev, 0x0075, 0x0080);
- b43_radio_write16(dev, 0x0079, 0x0081);
- }
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x005A, 0x0070);
- b43_radio_write16(dev, 0x005B, 0x007B);
- b43_radio_write16(dev, 0x005C, 0x00B0);
- b43_radio_write16(dev, 0x007A, 0x000F);
- b43_phy_write(dev, 0x0038, 0x0677);
- b43_radio_init2050(dev);
- }
- b43_phy_write(dev, 0x0014, 0x0080);
- b43_phy_write(dev, 0x0032, 0x00CA);
- b43_phy_write(dev, 0x0032, 0x00CC);
- b43_phy_write(dev, 0x0035, 0x07C2);
-//XXX won't trigger b43_lo_b_measure(dev);
- b43_phy_write(dev, 0x0026, 0xCC00);
- if (phy->radio_ver != 0x2050)
- b43_phy_write(dev, 0x0026, 0xCE00);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1000);
- b43_phy_write(dev, 0x002A, 0x88A3);
- if (phy->radio_ver != 0x2050)
- b43_phy_write(dev, 0x002A, 0x88C2);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
- b43_phy_init_pctl(dev);
-}
-
-static void b43_phy_initb4(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 offset, val;
-
- b43_write16(dev, 0x03EC, 0x3F22);
- b43_phy_write(dev, 0x0020, 0x301C);
- b43_phy_write(dev, 0x0026, 0x0000);
- b43_phy_write(dev, 0x0030, 0x00C6);
- b43_phy_write(dev, 0x0088, 0x3E00);
- val = 0x3C3D;
- for (offset = 0x0089; offset < 0x00A7; offset++) {
- b43_phy_write(dev, offset, val);
- val -= 0x0202;
- }
- b43_phy_write(dev, 0x03E4, 0x3000);
- b43_radio_selectchannel(dev, phy->channel, 0);
- if (phy->radio_ver != 0x2050) {
- b43_radio_write16(dev, 0x0075, 0x0080);
- b43_radio_write16(dev, 0x0079, 0x0081);
- }
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x0050, 0x0023);
- if (phy->radio_ver == 0x2050) {
- b43_radio_write16(dev, 0x0050, 0x0020);
- b43_radio_write16(dev, 0x005A, 0x0070);
- b43_radio_write16(dev, 0x005B, 0x007B);
- b43_radio_write16(dev, 0x005C, 0x00B0);
- b43_radio_write16(dev, 0x007A, 0x000F);
- b43_phy_write(dev, 0x0038, 0x0677);
- b43_radio_init2050(dev);
- }
- b43_phy_write(dev, 0x0014, 0x0080);
- b43_phy_write(dev, 0x0032, 0x00CA);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x0032, 0x00E0);
- b43_phy_write(dev, 0x0035, 0x07C2);
-
-//XXX won't trigger b43_lo_b_measure(dev);
-
- b43_phy_write(dev, 0x0026, 0xCC00);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x0026, 0xCE00);
- b43_write16(dev, B43_MMIO_CHANNEL_EXT, 0x1100);
- b43_phy_write(dev, 0x002A, 0x88A3);
- if (phy->radio_ver == 0x2050)
- b43_phy_write(dev, 0x002A, 0x88C2);
- b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
- b43_calc_nrssi_slope(dev);
- b43_calc_nrssi_threshold(dev);
- }
- b43_phy_init_pctl(dev);
-}
-
static void b43_phy_initb5(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct b43_phy *phy = &dev->phy;
u16 offset, value;
u8 old_channel;
@@ -1947,30 +1844,12 @@ int b43_phy_init(struct b43_wldev *dev)
case B43_PHYTYPE_A:
if (phy->rev == 2 || phy->rev == 3)
b43_phy_inita(dev);
else
unsupported = 1;
break;
- case B43_PHYTYPE_B:
- switch (phy->rev) {
- case 2:
- b43_phy_initb2(dev);
- break;
- case 4:
- b43_phy_initb4(dev);
- break;
- case 5:
- b43_phy_initb5(dev);
- break;
- case 6:
- b43_phy_initb6(dev);
- break;
- default:
- unsupported = 1;
- }
- break;
case B43_PHYTYPE_G:
b43_phy_initg(dev);
break;
case B43_PHYTYPE_N:
err = b43_phy_initn(dev);
break;
reply other threads:[~2008-04-20 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804201623.26816.mb@bu3sch.de \
--to=mb@bu3sch.de \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.